Source code
Revision control
Copy as Markdown
Other Tools
/* -*- indent-tabs-mode: nil; js-indent-level: 2 -*-
* vim: sw=2 ts=2 sts=2 expandtab
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
/**
* This component handles history and orphans expiration.
* Expiration runs:
* - At idle, but just once, we stop any other kind of expiration during idle
* to preserve batteries in portable devices.
* - At shutdown, only if the database is dirty, we should still avoid to
* expire too heavily on shutdown.
* - On a repeating timer we expire in small chunks.
*
* Expiration algorithm will adapt itself based on:
* - Memory size of the device.
* - Status of the database (clean or dirty).
*/
import { XPCOMUtils } from "resource://gre/modules/XPCOMUtils.sys.mjs";
const lazy = {};
ChromeUtils.defineESModuleGetters(lazy, {
PlacesUtils: "resource://gre/modules/PlacesUtils.sys.mjs",
});
// Last expiration step should run before the final sync.
const TOPIC_DEBUG_START_EXPIRATION = "places-debug-start-expiration";
const TOPIC_IDLE_BEGIN = "idle";
const TOPIC_IDLE_END = "active";
const TOPIC_IDLE_DAILY = "idle-daily";
const TOPIC_TESTING_MODE = "testing-mode";
const TOPIC_TEST_INTERVAL_CHANGED = "test-interval-changed";
// This value determines which systems we consider to have limited memory.
// This is used to protect against large database sizes on those systems.
const DATABASE_MEMORY_CONSTRAINED_THRESHOLD = 2147483648; // 2 GiB
// This value determines which systems we consider to have limited disk space.
// This is used to protect against large database sizes on those systems.
const DATABASE_DISK_CONSTRAINED_THRESHOLD = 5368709120; // 5 GiB
// Maximum size of the optimal database. High-end hardware has plenty of
// memory and disk space, but performances don't grow linearly.
const DATABASE_MAX_SIZE = 78643200; // 75 MiB
// If the physical memory size is bogus, fallback to this.
const MEMSIZE_FALLBACK_BYTES = 268435456; // 256 MiB
// If the disk available space is bogus, fallback to this.
const DISKSIZE_FALLBACK_BYTES = 268435456; // 256 MiB
// Max number of entries to expire at each expiration step.
// This value is globally used for different kind of data we expire, can be
// tweaked based on data type. See below in getQuery.
const EXPIRE_LIMIT_PER_STEP = 6;
// When we run a large expiration step, the above limit is multiplied by this.
const EXPIRE_LIMIT_PER_LARGE_STEP_MULTIPLIER = 10;
// When history is clean or dirty enough we will adapt the expiration algorithm
// to be more lazy or more aggressive.
// This is done acting on the interval between expiration steps and the number
// of expirable items.
// 1. Clean history:
// We expire at (default interval * EXPIRE_AGGRESSIVITY_MULTIPLIER) the
// default number of entries.
// 2. Dirty history:
// We expire at the default interval, but a greater number of entries
// (default number of entries * EXPIRE_AGGRESSIVITY_MULTIPLIER).
const EXPIRE_AGGRESSIVITY_MULTIPLIER = 3;
// This is the average size in bytes of an URI entry in the database.
// Magic numbers are determined through analysis of the distribution of a ratio
// between number of unique URIs and database size among our users.
// Used as a fall back value when it's not possible to calculate the real value.
const URIENTRY_AVG_SIZE = 700;
// Seconds of idle time before starting a larger expiration step.
// Notice during idle we stop the expiration timer since we don't want to hurt
// stand-by or mobile devices batteries.
const IDLE_TIMEOUT_SECONDS = 5 * 60;
// If the number of pages over history limit is greater than this threshold,
// expiration will be more aggressive, to bring back history to a saner size.
const OVERLIMIT_PAGES_THRESHOLD = 1000;
// Milliseconds in a day.
const MSECS_PER_DAY = 86400000;
// When we expire we can use these limits:
// - SMALL for usual partial expirations, will expire a small chunk.
// - LARGE for idle or shutdown expirations, will expire a large chunk.
// - UNLIMITED will expire all the orphans.
// - DEBUG will use a known limit, passed along with the debug notification.
const LIMIT = {
SMALL: 0,
LARGE: 1,
UNLIMITED: 2,
DEBUG: 3,
};
// Represents the status of history database.
const STATUS = {
CLEAN: 0,
DIRTY: 1,
UNKNOWN: 2,
};
// Represents actions on which a query will run.
const ACTION = {
TIMED: 1 << 0, // happens every this.intervalSeconds
TIMED_OVERLIMIT: 1 << 1, // like TIMED but only when history is over limits
SHUTDOWN_DIRTY: 1 << 2, // happens at shutdown for DIRTY state
IDLE_DIRTY: 1 << 3, // happens on idle for DIRTY state
IDLE_DAILY: 1 << 4, // happens once a day on idle
DEBUG: 1 << 5, // happens on TOPIC_DEBUG_START_EXPIRATION
};
// The queries we use to expire.
const EXPIRATION_QUERIES = {
// Some visits can be expired more often than others, cause they are less
// useful to the user and can pollute awesomebar results:
// 1. urls over 255 chars having only one visit
// 2. downloads
// 3. non-typed hidden single-visit urls
// We never expire redirect targets, because they are currently necessary to
QUERY_FIND_EXOTIC_VISITS_TO_EXPIRE: {
sql: `INSERT INTO expiration_notify (v_id, url, guid, visit_date, reason)
WITH visits AS (
SELECT v.id, url, guid, visit_type, visit_date, visit_count, hidden, typed
FROM moz_historyvisits v
JOIN moz_places h ON h.id = v.place_id
WHERE visit_date < strftime('%s','now','localtime','start of day','-90 days','utc') * 1000000
AND visit_type NOT IN (5,6)
)
SELECT id, url, guid, visit_date, "exotic"
FROM visits
WHERE (hidden = 1 AND typed = 0 AND visit_count <= 1) OR visit_type = 7
UNION ALL
SELECT id, url, guid, visit_date, "exotic"
FROM visits
WHERE visit_count = 1 AND LENGTH(url) > 255
ORDER BY visit_date ASC
LIMIT :limit_visits`,
actions:
ACTION.TIMED_OVERLIMIT |
ACTION.IDLE_DIRTY |
ACTION.IDLE_DAILY |
ACTION.DEBUG,
},
// Finds visits to be expired when history is over the unique pages limit,
// otherwise will return nothing.
// This explicitly excludes any visits added in the last 7 days, to protect
// users with thousands of bookmarks from constantly losing history.
QUERY_FIND_VISITS_TO_EXPIRE: {
sql: `INSERT INTO expiration_notify
(v_id, url, guid, visit_date, expected_results)
SELECT v.id, h.url, h.guid, v.visit_date, :limit_visits
FROM moz_historyvisits v
JOIN moz_places h ON h.id = v.place_id
WHERE (SELECT COUNT(*) FROM moz_places) > :max_uris
AND visit_date < strftime('%s','now','localtime','start of day','-7 days','utc') * 1000000
ORDER BY v.visit_date ASC
LIMIT :limit_visits`,
actions:
ACTION.TIMED_OVERLIMIT |
ACTION.IDLE_DIRTY |
ACTION.IDLE_DAILY |
ACTION.DEBUG,
},
// Removes the previously found visits.
QUERY_EXPIRE_VISITS: {
sql: `DELETE FROM moz_historyvisits WHERE id IN (
SELECT v_id FROM expiration_notify WHERE v_id NOTNULL
)`,
actions:
ACTION.TIMED_OVERLIMIT |
ACTION.IDLE_DIRTY |
ACTION.IDLE_DAILY |
ACTION.DEBUG,
},
// Finds orphan URIs in the database.
// Notice we won't notify single removed URIs on History.clear(), so we don't
// run this query in such a case, but just delete URIs.
// This could run in the middle of adding a visit or bookmark to a new page.
// In such a case since it is async, could end up expiring the orphan page
// before it actually gets the new visit or bookmark.
// Thus, since new pages get frecency -1, we filter on that.
QUERY_FIND_URIS_TO_EXPIRE: {
sql: `INSERT INTO expiration_notify (p_id, url, guid, visit_date)
SELECT h.id, h.url, h.guid, h.last_visit_date
FROM moz_places h
LEFT JOIN moz_historyvisits v ON h.id = v.place_id
WHERE h.last_visit_date IS NULL
AND h.foreign_count = 0
AND v.id IS NULL
AND frecency <> -1
LIMIT :limit_uris`,
actions:
ACTION.TIMED |
ACTION.TIMED_OVERLIMIT |
ACTION.SHUTDOWN_DIRTY |
ACTION.IDLE_DIRTY |
ACTION.IDLE_DAILY |
ACTION.DEBUG,
},
// Expire found URIs from the database.
QUERY_EXPIRE_URIS: {
sql: `DELETE FROM moz_places WHERE id IN (
SELECT p_id FROM expiration_notify WHERE p_id NOTNULL
) AND foreign_count = 0 AND last_visit_date ISNULL`,
actions:
ACTION.TIMED |
ACTION.TIMED_OVERLIMIT |
ACTION.SHUTDOWN_DIRTY |
ACTION.IDLE_DIRTY |
ACTION.IDLE_DAILY |
ACTION.DEBUG,
},
// Hosts accumulated during the places delete are updated through a trigger
// (see nsPlacesTriggers.h).
QUERY_UPDATE_HOSTS: {
sql: `DELETE FROM moz_updateoriginsdelete_temp`,
actions:
ACTION.TIMED |
ACTION.TIMED_OVERLIMIT |
ACTION.SHUTDOWN_DIRTY |
ACTION.IDLE_DIRTY |
ACTION.IDLE_DAILY |
ACTION.DEBUG,
},
// Expire from favicons any page that has only relations older than 180 days,
// if the page is not bookmarked, and we have a root icon that can be used
// as a placeholder until the page is visited again.
// The moz_pages_to_icons entries are removed by the table's FOREIGN KEY,
// while orphan icons are removed by the following queries.
QUERY_EXPIRE_OLD_FAVICONS: {
sql: `
DELETE FROM moz_pages_w_icons WHERE id IN (
WITH pages_with_old_relations (page_id, page_url_hash) AS (
SELECT page_id, page_url_hash
FROM moz_icons_to_pages ip
JOIN moz_pages_w_icons p ON p.id = page_id
GROUP BY page_id
HAVING max(expire_ms) < strftime('%s','now','localtime','start of day','-180 days','utc') * 1000
)
SELECT page_id
FROM pages_with_old_relations
JOIN moz_places h ON h.url_hash = page_url_hash
JOIN moz_origins o ON h.origin_id = o.id
WHERE foreign_count = 0
AND EXISTS (
SELECT 1 FROM moz_icons
WHERE root = 1
AND fixed_icon_url_hash = hash(fixup_url(o.host) || '/favicon.ico')
)
LIMIT 100
)`,
actions: ACTION.IDLE_DIRTY | ACTION.IDLE_DAILY | ACTION.DEBUG,
},
// Expire orphan pages from the icons database.
QUERY_EXPIRE_FAVICONS_PAGES: {
sql: `DELETE FROM moz_pages_w_icons
WHERE page_url_hash NOT IN (
SELECT url_hash FROM moz_places
) OR NOT EXISTS (
SELECT 1 FROM moz_icons_to_pages WHERE page_id = moz_pages_w_icons.id
)`,
actions:
ACTION.TIMED_OVERLIMIT |
ACTION.SHUTDOWN_DIRTY |
ACTION.IDLE_DIRTY |
ACTION.IDLE_DAILY |
ACTION.DEBUG,
},
// Expire orphan icons from the database.
QUERY_EXPIRE_FAVICONS: {
sql: `DELETE FROM moz_icons WHERE id IN (
SELECT id FROM moz_icons WHERE root = 0
EXCEPT
SELECT icon_id FROM moz_icons_to_pages
)`,
actions:
ACTION.TIMED_OVERLIMIT |
ACTION.SHUTDOWN_DIRTY |
ACTION.IDLE_DIRTY |
ACTION.IDLE_DAILY |
ACTION.DEBUG,
},
// Expire orphan page annotations from the database.
QUERY_EXPIRE_ANNOS: {
sql: `DELETE FROM moz_annos WHERE id in (
SELECT a.id FROM moz_annos a
LEFT JOIN moz_places h ON a.place_id = h.id
WHERE h.id IS NULL
LIMIT :limit_annos
)`,
actions:
ACTION.TIMED |
ACTION.TIMED_OVERLIMIT |
ACTION.SHUTDOWN_DIRTY |
ACTION.IDLE_DIRTY |
ACTION.IDLE_DAILY |
ACTION.DEBUG,
},
// Expire orphan inputhistory.
QUERY_EXPIRE_INPUTHISTORY: {
sql: `DELETE FROM moz_inputhistory
WHERE place_id IN (SELECT p_id FROM expiration_notify)
AND place_id IN (
SELECT i.place_id FROM moz_inputhistory i
LEFT JOIN moz_places h ON h.id = i.place_id
WHERE h.id IS NULL
LIMIT :limit_inputhistory
)`,
actions:
ACTION.TIMED |
ACTION.TIMED_OVERLIMIT |
ACTION.SHUTDOWN_DIRTY |
ACTION.IDLE_DIRTY |
ACTION.IDLE_DAILY |
ACTION.DEBUG,
},
// Select entries for notifications.
// If p_id is set whole_entry = 1, then we have expired the full page.
// Either p_id or v_id are always set.
QUERY_SELECT_NOTIFICATIONS: {
sql: `/* do not warn (bug no): temp table has no index */
SELECT url, guid, MAX(visit_date) AS visit_date,
MAX(IFNULL(MIN(p_id, 1), MIN(v_id, 0))) AS whole_entry,
MAX(expected_results) AS expected_results,
(SELECT MAX(visit_date) FROM expiration_notify
WHERE reason = "expired" AND url = n.url AND p_id ISNULL
) AS most_recent_expired_visit
FROM expiration_notify n
GROUP BY url`,
actions:
ACTION.TIMED |
ACTION.TIMED_OVERLIMIT |
ACTION.SHUTDOWN_DIRTY |
ACTION.IDLE_DIRTY |
ACTION.IDLE_DAILY |
ACTION.DEBUG,
},
// Empty the notifications table.
QUERY_DELETE_NOTIFICATIONS: {
sql: "DELETE FROM expiration_notify",
actions:
ACTION.TIMED |
ACTION.TIMED_OVERLIMIT |
ACTION.SHUTDOWN_DIRTY |
ACTION.IDLE_DIRTY |
ACTION.IDLE_DAILY |
ACTION.DEBUG,
},
// Expire interactions older than N days.
QUERY_EXPIRE_INTERACTIONS: {
sql: `DELETE FROM moz_places_metadata
WHERE id IN (
SELECT id FROM moz_places_metadata
WHERE updated_at < strftime('%s','now','localtime','-' || :days_interactions || ' day','start of day','utc') * 1000
ORDER BY updated_at ASC
LIMIT :limit_interactions
)`,
get disabled() {
return !Services.prefs.getBoolPref(
"browser.places.interactions.enabled",
false
);
},
actions:
ACTION.TIMED_OVERLIMIT |
ACTION.SHUTDOWN_DIRTY |
ACTION.IDLE_DIRTY |
ACTION.IDLE_DAILY |
ACTION.DEBUG,
},
};
export function nsPlacesExpiration() {
// Allows other components to easily access getPagesLimit.
this.wrappedJSObject = this;
XPCOMUtils.defineLazyServiceGetter(
this,
"_idle",
"@mozilla.org/widget/useridleservice;1",
"nsIUserIdleService"
);
// Max number of unique URIs to retain in history.
// Notice this is a lazy limit. This means we will start to expire if we will
// go over it, but we won't ensure that we will stop exactly when we reach it,
// instead we will stop after the next expiration step that will bring us
// below it.
// If this preference does not exist or has a negative value, we will
// calculate a limit based on current hardware.
XPCOMUtils.defineLazyPreferenceGetter(
this,
"maxPages",
"places.history.expiration.max_pages",
-1,
() => {
// Clear the cache.
dump("max_pages changing\n");
this._pagesLimit = null;
}
);
// Seconds between each expiration step.
XPCOMUtils.defineLazyPreferenceGetter(
this,
"intervalSeconds",
"places.history.expiration.interval_seconds",
3 * 60, // 3 minutes
() => {
// Renew the timer with the new interval value.
this._newTimer();
},
v => (v > 0 ? v : 3 * 60) // Accept only positive values.
);
this._dbInitializedPromise = lazy.PlacesUtils.withConnectionWrapper(
"PlacesExpiration.sys.mjs: setup",
async db => {
await db.execute(
`CREATE TEMP TABLE expiration_notify (
id INTEGER PRIMARY KEY,
v_id INTEGER,
p_id INTEGER,
url TEXT NOT NULL,
guid TEXT NOT NULL,
visit_date INTEGER,
expected_results INTEGER NOT NULL DEFAULT 0,
reason TEXT NOT NULL DEFAULT "expired"
)`
);
}
)
.then(() => {
// Start the expiration timer.
this._newTimer();
// Expire daily on idle.
Services.obs.addObserver(this, TOPIC_IDLE_DAILY, true);
})
.catch(console.error);
// Block shutdown.
let shutdownClient =
lazy.PlacesUtils.history.connectionShutdownClient.jsclient;
shutdownClient.addBlocker("Places Expiration: shutdown", () => {
if (this._shuttingDown) {
return;
}
this._shuttingDown = true;
this.expireOnIdle = false;
if (this._timer) {
this._timer.cancel();
this._timer = null;
}
// If the database is dirty, we want to expire some entries, to speed up
// the expiration process.
if (this.status == STATUS.DIRTY) {
this._expire(ACTION.SHUTDOWN_DIRTY, LIMIT.LARGE).catch(console.error);
}
});
}
nsPlacesExpiration.prototype = {
observe(aSubject, aTopic, aData) {
if (this._shuttingDown) {
return;
}
if (aTopic == TOPIC_DEBUG_START_EXPIRATION) {
// The passed-in limit is the maximum number of visits to expire when
// history is over capacity. Mind to correctly handle the NaN value.
let limit = parseInt(aData);
if (limit == -1) {
// Everything should be expired without any limit. If history is over
// capacity then all existing visits will be expired.
// Should only be used in tests, since may cause dataloss.
this._expire(ACTION.DEBUG, LIMIT.UNLIMITED).catch(console.error);
} else if (limit > 0) {
// The number of expired visits is limited by this amount. It may be
// used for testing purposes, like checking that limited queries work.
this._debugLimit = limit;
this._expire(ACTION.DEBUG, LIMIT.DEBUG).catch(console.error);
} else {
// Any other value is intended as a 0 limit, that means no visits
// will be expired. Even if this doesn't touch visits, it will remove
// any orphan pages, icons, annotations and similar from the database,
// so it may be used for cleanup purposes.
this._debugLimit = -1;
this._expire(ACTION.DEBUG, LIMIT.DEBUG).catch(console.error);
}
} else if (aTopic == TOPIC_IDLE_BEGIN) {
// Stop the expiration timer. We don't want to keep up expiring on idle
// to preserve batteries on mobile devices and avoid killing stand-by.
if (this._timer) {
this._timer.cancel();
this._timer = null;
}
if (this.expireOnIdle) {
this._expire(ACTION.IDLE_DIRTY, LIMIT.LARGE).catch(console.error);
}
} else if (aTopic == TOPIC_IDLE_END) {
// Restart the expiration timer.
if (!this._timer) {
this._newTimer();
}
} else if (aTopic == TOPIC_IDLE_DAILY) {
this._expire(ACTION.IDLE_DAILY, LIMIT.LARGE).catch(console.error);
} else if (aTopic == TOPIC_TESTING_MODE) {
this._testingMode = true;
} else if (aTopic == lazy.PlacesUtils.TOPIC_INIT_COMPLETE) {
const placesObserver = new PlacesWeakCallbackWrapper(
// History status is clean after a clear history.
() => {
this.status = STATUS.CLEAN;
}
);
PlacesObservers.addListener(["history-cleared"], placesObserver);
}
},
// nsINamed
name: "nsPlacesExpiration",
// nsITimerCallback
notify() {
// Run at the first idle, or after 5 minutes, whatever comes first.
Services.tm.idleDispatchToMainThread(async () => {
let db = await lazy.PlacesUtils.promiseDBConnection();
let pagesCount = (
await db.executeCached("SELECT count(*) AS count FROM moz_places")
)[0].getResultByName("count");
let pagesLimit = await this.getPagesLimit();
// Check if we are over history capacity, if so visits must be expired.
let overLimitPages = pagesCount - pagesLimit;
let action = overLimitPages > 0 ? ACTION.TIMED_OVERLIMIT : ACTION.TIMED;
// Adapt expiration aggressivity to the number of pages over the limit.
let limit =
overLimitPages > OVERLIMIT_PAGES_THRESHOLD ? LIMIT.LARGE : LIMIT.SMALL;
this._expire(action, limit).catch(console.error);
}, 300000);
},
_handleQueryResultAndAddNotification(row, notifications) {
// We don't want to notify after shutdown.
if (this._shuttingDown) {
return;
}
// expected_results is set to the number of expected visits by
// QUERY_FIND_VISITS_TO_EXPIRE. We decrease that counter for each found
// visit and if it reaches zero we mark the database as dirty, since all
// the expected visits were expired, so it's likely the next run will
// find more.
let expectedResults = row.getResultByName("expected_results");
if (expectedResults > 0) {
if (!("_expectedResultsCount" in this)) {
this._expectedResultsCount = expectedResults;
}
if (this._expectedResultsCount > 0) {
this._expectedResultsCount--;
}
}
let uri = Services.io.newURI(row.getResultByName("url"));
let guid = row.getResultByName("guid");
let visitDate = row.getResultByName("visit_date");
let wholeEntry = row.getResultByName("whole_entry");
let mostRecentExpiredVisit = row.getResultByName(
"most_recent_expired_visit"
);
if (mostRecentExpiredVisit) {
let days = parseInt(
(Date.now() - mostRecentExpiredVisit / 1000) / MSECS_PER_DAY
);
if (!this._mostRecentExpiredVisitDays) {
this._mostRecentExpiredVisitDays = days;
} else if (days < this._mostRecentExpiredVisitDays) {
this._mostRecentExpiredVisitDays = days;
}
}
// Dispatch expiration notifications to history.
const isRemovedFromStore = !!wholeEntry;
notifications.push(
new PlacesVisitRemoved({
url: uri.spec,
pageGuid: guid,
reason: PlacesVisitRemoved.REASON_EXPIRED,
isRemovedFromStore,
isPartialVisistsRemoval: !isRemovedFromStore && visitDate > 0,
})
);
},
_shuttingDown: false,
_status: STATUS.UNKNOWN,
set status(aNewStatus) {
if (aNewStatus != this._status) {
// If status changes we should restart the timer.
this._status = aNewStatus;
this._newTimer();
// If needed add/remove the cleanup step on idle. We want to expire on
// idle only if history is dirty, to preserve mobile devices batteries.
this.expireOnIdle = aNewStatus == STATUS.DIRTY;
}
},
get status() {
return this._status;
},
async getPagesLimit() {
if (this._pagesLimit != null) {
return this._pagesLimit;
}
if (this.maxPages >= 0) {
return (this._pagesLimit = this.maxPages);
}
// The user didn't specify a custom limit, so we calculate the number of
// unique places that may fit an optimal database size on this hardware.
// Oldest pages over this threshold will be expired.
let memSizeBytes = MEMSIZE_FALLBACK_BYTES;
try {
// Limit the size on systems with small memory.
memSizeBytes = Services.sysinfo.getProperty("memsize");
} catch (ex) {}
if (memSizeBytes <= 0) {
memSizeBytes = MEMSIZE_FALLBACK_BYTES;
}
let diskAvailableBytes = DISKSIZE_FALLBACK_BYTES;
try {
// Protect against a full disk or tiny quota.
diskAvailableBytes =
lazy.PlacesUtils.history.DBConnection.databaseFile.QueryInterface(
Ci.nsIFile
).diskSpaceAvailable;
} catch (ex) {}
if (diskAvailableBytes <= 0) {
diskAvailableBytes = DISKSIZE_FALLBACK_BYTES;
}
const isMemoryConstrained =
memSizeBytes < DATABASE_MEMORY_CONSTRAINED_THRESHOLD;
const isDiskConstrained =
diskAvailableBytes < DATABASE_DISK_CONSTRAINED_THRESHOLD;
let optimalDatabaseSize = DATABASE_MAX_SIZE;
if (isMemoryConstrained || isDiskConstrained) {
// This size is used to protect against a large database size
// on disks with limited space or on systems with small memory
optimalDatabaseSize /= 2;
}
// Calculate avg size of a URI in the database.
let db;
try {
db = await lazy.PlacesUtils.promiseDBConnection();
if (db) {
let row = (
await db.execute(`SELECT * FROM pragma_page_size(),
pragma_page_count(),
pragma_freelist_count(),
(SELECT count(*) FROM moz_places)`)
)[0];
let pageSize = row.getResultByIndex(0);
let pageCount = row.getResultByIndex(1);
let freelistCount = row.getResultByIndex(2);
let uriCount = row.getResultByIndex(3);
let dbSize = (pageCount - freelistCount) * pageSize;
let avgURISize = Math.ceil(dbSize / uriCount);
// For new profiles this value may be too large, due to the Sqlite header,
// or Infinity when there are no pages. Thus we must limit it.
if (avgURISize > URIENTRY_AVG_SIZE * 3) {
avgURISize = URIENTRY_AVG_SIZE;
}
return (this._pagesLimit = Math.ceil(optimalDatabaseSize / avgURISize));
}
} catch (ex) {
// We may have been initialized late in the shutdown process, maybe
// by a call to clear history on shutdown.
// If we're unable to get a connection clone, we'll just proceed with a
// large default value, it should not be critical at this point in the
// application life-cycle.
}
return (this._pagesLimit = 100000);
},
_isIdleObserver: false,
_expireOnIdle: false,
set expireOnIdle(aExpireOnIdle) {
// Observe idle regardless aExpireOnIdle, since we always want to stop
// timed expiration on idle, to preserve mobile battery life.
if (!this._isIdleObserver && !this._shuttingDown) {
this._idle.addIdleObserver(this, IDLE_TIMEOUT_SECONDS);
this._isIdleObserver = true;
} else if (this._isIdleObserver && this._shuttingDown) {
this._idle.removeIdleObserver(this, IDLE_TIMEOUT_SECONDS);
this._isIdleObserver = false;
}
// If running a debug expiration we need full control of what happens
// but idle cleanup could activate in the middle, since tinderboxes are
// permanently idle. That would cause unexpected oranges, so disable it.
if (this._debugLimit !== undefined) {
this._expireOnIdle = false;
} else {
this._expireOnIdle = aExpireOnIdle;
}
},
get expireOnIdle() {
return this._expireOnIdle;
},
// Number of expiration steps needed to reach a CLEAN status.
_telemetrySteps: 1,
/**
* Expires visits and orphans.
*
* @param aAction
* The ACTION we are expiring for. See the ACTION const for values.
* @param aLimit
* Whether to use small, large or no limits when expiring. See the
* LIMIT const for values.
*/
async _expire(aAction, aLimit) {
// Don't try to further expire after shutdown.
if (this._shuttingDown && aAction != ACTION.SHUTDOWN_DIRTY) {
return;
}
await this._dbInitializedPromise;
try {
let notifications = [];
await lazy.PlacesUtils.withConnectionWrapper(
"PlacesExpiration.sys.mjs: expire",
async db => {
await db.executeTransaction(async () => {
for (let queryType in EXPIRATION_QUERIES) {
let query = EXPIRATION_QUERIES[queryType];
if (query.actions & aAction && !query.disabled) {
let params = await this._getQueryParams(
queryType,
aLimit,
aAction
);
await db.executeCached(query.sql, params, row => {
this._handleQueryResultAndAddNotification(row, notifications);
});
}
}
});
}
);
if (notifications.length) {
PlacesObservers.notifyListeners(notifications);
}
} catch (ex) {
console.error(ex);
return;
}
if (this._mostRecentExpiredVisitDays) {
try {
Services.telemetry
.getHistogramById("PLACES_MOST_RECENT_EXPIRED_VISIT_DAYS")
.add(this._mostRecentExpiredVisitDays);
} catch (ex) {
console.error("Unable to report telemetry.");
} finally {
delete this._mostRecentExpiredVisitDays;
}
}
if ("_expectedResultsCount" in this) {
// Adapt the aggressivity of steps based on the status of history.
// A dirty history will return all the entries we are expecting bringing
// our countdown to zero, while a clean one will not.
let oldStatus = this.status;
this.status =
this._expectedResultsCount == 0 ? STATUS.DIRTY : STATUS.CLEAN;
// Collect or send telemetry data.
if (this.status == STATUS.DIRTY) {
this._telemetrySteps++;
} else {
// Avoid reporting the common cases where the database is clean, or
// a single step is needed.
if (oldStatus == STATUS.DIRTY) {
try {
Services.telemetry
.getHistogramById("PLACES_EXPIRATION_STEPS_TO_CLEAN2")
.add(this._telemetrySteps);
} catch (ex) {
console.error("Unable to report telemetry.");
}
}
this._telemetrySteps = 1;
}
delete this._expectedResultsCount;
}
// Dispatch a notification that expiration has finished.
Services.obs.notifyObservers(
null,
lazy.PlacesUtils.TOPIC_EXPIRATION_FINISHED
);
},
/**
* Generate a query used for expiration.
*
* @param aQueryType
* Type of the query.
* @param aLimit
* Whether to use small, large or no limits when expiring. See the
* LIMIT const for values.
* @param aAction
* Current action causing the expiration. See the ACTION const.
*/
async _getQueryParams(aQueryType, aLimit, aAction) {
let baseLimit;
switch (aLimit) {
case LIMIT.UNLIMITED:
baseLimit = -1;
break;
case LIMIT.SMALL:
baseLimit = EXPIRE_LIMIT_PER_STEP;
break;
case LIMIT.LARGE:
baseLimit =
EXPIRE_LIMIT_PER_STEP * EXPIRE_LIMIT_PER_LARGE_STEP_MULTIPLIER;
break;
case LIMIT.DEBUG:
baseLimit = this._debugLimit;
break;
}
if (
this.status == STATUS.DIRTY &&
aAction != ACTION.DEBUG &&
baseLimit > 0
) {
baseLimit *= EXPIRE_AGGRESSIVITY_MULTIPLIER;
}
switch (aQueryType) {
case "QUERY_FIND_EXOTIC_VISITS_TO_EXPIRE":
return {
// Avoid expiring all visits in case of an unlimited debug expiration,
// just remove orphans instead.
limit_visits:
aLimit == LIMIT.DEBUG && baseLimit == -1 ? 0 : baseLimit,
};
case "QUERY_FIND_VISITS_TO_EXPIRE":
return {
max_uris: await this.getPagesLimit(),
// Avoid expiring all visits in case of an unlimited debug expiration,
// just remove orphans instead.
limit_visits:
aLimit == LIMIT.DEBUG && baseLimit == -1 ? 0 : baseLimit,
};
case "QUERY_FIND_URIS_TO_EXPIRE":
return {
limit_uris: baseLimit,
};
case "QUERY_EXPIRE_ANNOS":
return {
// Each page may have multiple annos.
limit_annos: baseLimit * EXPIRE_AGGRESSIVITY_MULTIPLIER,
};
case "QUERY_EXPIRE_INPUTHISTORY":
return {
limit_inputhistory: baseLimit,
};
case "QUERY_EXPIRE_INTERACTIONS":
return {
days_interactions: Services.prefs.getIntPref(
"browser.places.interactions.expireDays",
60
),
limit_interactions:
aLimit == LIMIT.DEBUG && baseLimit == -1 ? 0 : baseLimit,
};
}
return undefined;
},
/**
* Creates a new timer based on this.intervalSeconds.
*
* @return a REPEATING_SLACK nsITimer that runs every this.intervalSeconds.
*/
_newTimer() {
if (this._timer) {
this._timer.cancel();
}
if (this._shuttingDown) {
return undefined;
}
if (!this._isIdleObserver) {
this._idle.addIdleObserver(this, IDLE_TIMEOUT_SECONDS);
this._isIdleObserver = true;
}
let interval =
this.status != STATUS.DIRTY
? this.intervalSeconds * EXPIRE_AGGRESSIVITY_MULTIPLIER
: this.intervalSeconds;
let timer = Cc["@mozilla.org/timer;1"].createInstance(Ci.nsITimer);
timer.initWithCallback(
this,
interval * 1000,
Ci.nsITimer.TYPE_REPEATING_SLACK_LOW_PRIORITY
);
if (this._testingMode) {
Services.obs.notifyObservers(null, TOPIC_TEST_INTERVAL_CHANGED, interval);
}
return (this._timer = timer);
},
classID: Components.ID("705a423f-2f69-42f3-b9fe-1517e0dee56f"),
QueryInterface: ChromeUtils.generateQI([
"nsINamed",
"nsIObserver",
"nsISupportsWeakReference",
"nsITimerCallback",
]),
};