Source code
Revision control
Copy as Markdown
Other Tools
//! Triple buffering in Rust
//!
//! In this crate, we propose a Rust implementation of triple buffering. This is
//! a non-blocking thread synchronization mechanism that can be used when a
//! single producer thread is frequently updating a shared data block, and a
//! single consumer thread wants to be able to read the latest available version
//! of the shared data whenever it feels like it.
//!
//! # Examples
//!
//! For many use cases, you can use the ergonomic write/read interface, where
//! the producer moves values into the buffer and the consumer accesses the
//! latest buffer by shared reference:
//!
//! ```
//! // Create a triple buffer
//! use triple_buffer::TripleBuffer;
//! let buf = TripleBuffer::new(0);
//!
//! // Split it into an input and output interface, to be respectively sent to
//! // the producer thread and the consumer thread
//! let (mut buf_input, mut buf_output) = buf.split();
//!
//! // The producer can move a value into the buffer at any time
//! buf_input.write(42);
//!
//! // The consumer can access the latest value from the producer at any time
//! let latest_value_ref = buf_output.read();
//! assert_eq!(*latest_value_ref, 42);
//! ```
//!
//! In situations where moving the original value away and being unable to
//! modify it on the consumer's side is too costly, such as if creating a new
//! value involves dynamic memory allocation, you can use a lower-level API
//! which allows you to access the producer and consumer's buffers in place
//! and to precisely control when updates are propagated:
//!
//! ```
//! // Create and split a triple buffer
//! use triple_buffer::TripleBuffer;
//! let buf = TripleBuffer::new(String::with_capacity(42));
//! let (mut buf_input, mut buf_output) = buf.split();
//!
//! // Mutate the input buffer in place
//! {
//! // Acquire a reference to the input buffer
//! let input = buf_input.input_buffer();
//!
//! // In general, you don't know what's inside of the buffer, so you should
//! // always reset the value before use (this is a type-specific process).
//! input.clear();
//!
//! // Perform an in-place update
//! input.push_str("Hello, ");
//! }
//!
//! // Publish the above input buffer update
//! buf_input.publish();
//!
//! // Manually fetch the buffer update from the consumer interface
//! buf_output.update();
//!
//! // Acquire a mutable reference to the output buffer
//! let output = buf_output.output_buffer();
//!
//! // Post-process the output value before use
//! output.push_str("world!");
//! ```
#![deny(missing_debug_implementations, missing_docs)]
use cache_padded::CachePadded;
use std::{
cell::UnsafeCell,
sync::{
atomic::{AtomicU8, Ordering},
Arc,
},
};
/// A triple buffer, useful for nonblocking and thread-safe data sharing
///
/// A triple buffer is a single-producer single-consumer nonblocking
/// communication channel which behaves like a shared variable: the producer
/// submits regular updates, and the consumer accesses the latest available
/// value whenever it feels like it.
///
#[derive(Debug)]
pub struct TripleBuffer<T: Send> {
/// Input object used by producers to send updates
input: Input<T>,
/// Output object used by consumers to read the current value
output: Output<T>,
}
//
impl<T: Clone + Send> TripleBuffer<T> {
/// Construct a triple buffer with a certain initial value
//
// FIXME: After spending some time thinking about this further, I reached
// the conclusion that clippy was right after all. But since this is
// a breaking change, I'm keeping that for the next major release.
//
#[allow(clippy::needless_pass_by_value)]
pub fn new(initial: T) -> Self {
Self::new_impl(|| initial.clone())
}
}
//
impl<T: Default + Send> Default for TripleBuffer<T> {
/// Construct a triple buffer with a default-constructed value
fn default() -> Self {
Self::new_impl(T::default)
}
}
//
impl<T: Send> TripleBuffer<T> {
/// Construct a triple buffer, using a functor to generate initial values
fn new_impl(mut generator: impl FnMut() -> T) -> Self {
// Start with the shared state...
let shared_state = Arc::new(SharedState::new(|_i| generator(), 0));
// ...then construct the input and output structs
TripleBuffer {
input: Input {
shared: shared_state.clone(),
input_idx: 1,
},
output: Output {
shared: shared_state,
output_idx: 2,
},
}
}
/// Extract input and output of the triple buffer
//
// NOTE: Although it would be nicer to directly return `Input` and `Output`
// from `new()`, the `split()` design gives some API evolution
// headroom towards future allocation-free modes of operation where
// the SharedState is a static variable, or a stack-allocated variable
// used through scoped threads or other unsafe thread synchronization.
//
//
pub fn split(self) -> (Input<T>, Output<T>) {
(self.input, self.output)
}
}
//
// The Clone and PartialEq traits are used internally for testing and I don't
// want to commit to supporting them publicly for now.
//
#[doc(hidden)]
impl<T: Clone + Send> Clone for TripleBuffer<T> {
fn clone(&self) -> Self {
// Clone the shared state. This is safe because at this layer of the
// interface, one needs an Input/Output &mut to mutate the shared state.
let shared_state = Arc::new(unsafe { (*self.input.shared).clone() });
// ...then the input and output structs
TripleBuffer {
input: Input {
shared: shared_state.clone(),
input_idx: self.input.input_idx,
},
output: Output {
shared: shared_state,
output_idx: self.output.output_idx,
},
}
}
}
//
#[doc(hidden)]
impl<T: PartialEq + Send> PartialEq for TripleBuffer<T> {
fn eq(&self, other: &Self) -> bool {
// Compare the shared states. This is safe because at this layer of the
// interface, one needs an Input/Output &mut to mutate the shared state.
let shared_states_equal = unsafe { (*self.input.shared).eq(&*other.input.shared) };
// Compare the rest of the triple buffer states
shared_states_equal
&& (self.input.input_idx == other.input.input_idx)
&& (self.output.output_idx == other.output.output_idx)
}
}
/// Producer interface to the triple buffer
///
/// The producer of data can use this struct to submit updates to the triple
/// buffer whenever he likes. These updates are nonblocking: a collision between
/// the producer and the consumer will result in cache contention, but deadlocks
/// and scheduling-induced slowdowns cannot happen.
///
#[derive(Debug)]
pub struct Input<T: Send> {
/// Reference-counted shared state
shared: Arc<SharedState<T>>,
/// Index of the input buffer (which is private to the producer)
input_idx: BufferIndex,
}
//
// Public interface
impl<T: Send> Input<T> {
/// Write a new value into the triple buffer
pub fn write(&mut self, value: T) {
// Update the input buffer
*self.input_buffer() = value;
// Publish our update to the consumer
self.publish();
}
/// Check if the consumer has fetched our last submission yet
///
/// This method is only intended for diagnostics purposes. Please do not let
/// it inform your decision of sending or not sending a value, as that would
/// effectively be building a very poor spinlock-based double buffer
/// implementation. If what you truly need is a double buffer, build
/// yourself a proper blocking one instead of wasting CPU time.
///
pub fn consumed(&self) -> bool {
let back_info = self.shared.back_info.load(Ordering::Relaxed);
back_info & BACK_DIRTY_BIT == 0
}
/// Access the input buffer directly
///
/// This advanced interface allows you to update the input buffer in place,
/// so that you can avoid creating values of type T repeatedy just to push
/// them into the triple buffer when doing so is expensive.
///
/// However, by using it, you force yourself to take into account some
/// implementation subtleties that you could normally ignore.
///
/// First, the buffer does not contain the last value that you published
/// (which is now available to the consumer thread). In fact, what you get
/// may not match _any_ value that you sent in the past, but rather be a new
/// value that was written in there by the consumer thread. All you can
/// safely assume is that the buffer contains a valid value of type T, which
/// you may need to "clean up" before use using a type-specific process.
///
/// Second, we do not send updates automatically. You need to call
/// `publish()` in order to propagate a buffer update to the consumer.
/// Alternative designs based on Drop were considered, but considered too
/// magical for the target audience of this interface.
///
pub fn input_buffer(&mut self) -> &mut T {
// This is safe because the synchronization protocol ensures that we
// have exclusive access to this buffer.
let input_ptr = self.shared.buffers[self.input_idx as usize].get();
unsafe { &mut *input_ptr }
}
/// Publish the current input buffer, checking for overwrites
///
/// After updating the input buffer using `input_buffer()`, you can use this
/// method to publish your updates to the consumer.
///
/// This will replace the current input buffer with another one, as you
/// cannot continue using the old one while the consumer is accessing it.
///
/// It will also tell you whether you overwrote a value which was not read
/// by the consumer thread.
///
pub fn publish(&mut self) -> bool {
// Swap the input buffer and the back buffer, setting the dirty bit
//
// The ordering must be AcqRel, because...
//
// - Our accesses to the old buffer must not be reordered after this
// operation (which mandates Release ordering), otherwise they could
// race with the consumer accessing the freshly published buffer.
// - Our accesses from the buffer must not be reordered before this
// operation (which mandates Consume ordering, that is best
// approximated by Acquire in Rust), otherwise they would race with
// the consumer accessing the buffer as well before switching to
// another buffer.
// * This reordering may seem paradoxical, but could happen if the
// compiler or CPU correctly speculated the new buffer's index
// before that index is actually read, as well as on weird hardware
// with incoherent caches like GPUs or old DEC Alpha where keeping
// data in sync across cores requires manual action.
//
let former_back_info = self
.shared
.back_info
.swap(self.input_idx | BACK_DIRTY_BIT, Ordering::AcqRel);
// The old back buffer becomes our new input buffer
self.input_idx = former_back_info & BACK_INDEX_MASK;
// Tell whether we have overwritten unread data
former_back_info & BACK_DIRTY_BIT != 0
}
/// Deprecated alias to `input_buffer()`, please use that method instead
#[cfg(any(feature = "raw", test))]
#[deprecated(
since = "5.0.5",
note = "The \"raw\" feature is deprecated as the performance \
optimization that motivated it turned out to be incorrect. \
All functionality is now available without using feature flags."
)]
pub fn raw_input_buffer(&mut self) -> &mut T {
self.input_buffer()
}
/// Deprecated alias to `publish()`, please use that method instead
#[cfg(any(feature = "raw", test))]
#[deprecated(
since = "5.0.5",
note = "The \"raw\" feature is deprecated as the performance \
optimization that motivated it turned out to be incorrect. \
All functionality is now available without using feature flags."
)]
pub fn raw_publish(&mut self) -> bool {
self.publish()
}
}
/// Consumer interface to the triple buffer
///
/// The consumer of data can use this struct to access the latest published
/// update from the producer whenever he likes. Readout is nonblocking: a
/// collision between the producer and consumer will result in cache contention,
/// but deadlocks and scheduling-induced slowdowns cannot happen.
///
#[derive(Debug)]
pub struct Output<T: Send> {
/// Reference-counted shared state
shared: Arc<SharedState<T>>,
/// Index of the output buffer (which is private to the consumer)
output_idx: BufferIndex,
}
//
// Public interface
impl<T: Send> Output<T> {
/// Access the latest value from the triple buffer
pub fn read(&mut self) -> &T {
// Fetch updates from the producer
self.update();
// Give access to the output buffer
self.output_buffer()
}
/// Tell whether a buffer update is incoming from the producer
///
/// This method is only intended for diagnostics purposes. Please do not let
/// it inform your decision of reading a value or not, as that would
/// effectively be building a very poor spinlock-based double buffer
/// implementation. If what you truly need is a double buffer, build
/// yourself a proper blocking one instead of wasting CPU time.
///
pub fn updated(&self) -> bool {
let back_info = self.shared.back_info.load(Ordering::Relaxed);
back_info & BACK_DIRTY_BIT != 0
}
/// Access the output buffer directly
///
/// This advanced interface allows you to modify the contents of the output
/// buffer, so that you can avoid copying the output value when this is an
/// expensive process. One possible application, for example, is to
/// post-process values from the producer before use.
///
/// However, by using it, you force yourself to take into account some
/// implementation subtleties that you could normally ignore.
///
/// First, keep in mind that you can lose access to the current output
/// buffer any time `read()` or `update()` is called, as it may be replaced
/// by an updated buffer from the producer automatically.
///
/// Second, to reduce the potential for the aforementioned usage error, this
/// method does not update the output buffer automatically. You need to call
/// `update()` in order to fetch buffer updates from the producer.
///
pub fn output_buffer(&mut self) -> &mut T {
// This is safe because the synchronization protocol ensures that we
// have exclusive access to this buffer.
let output_ptr = self.shared.buffers[self.output_idx as usize].get();
unsafe { &mut *output_ptr }
}
/// Update the output buffer
///
/// Check if the producer submitted a new data version, and if one is
/// available, update our output buffer to use it. Return a flag that tells
/// you whether such an update was carried out.
///
/// Bear in mind that when this happens, you will lose any change that you
/// performed to the output buffer via the `output_buffer()` interface.
///
pub fn update(&mut self) -> bool {
// Access the shared state
let shared_state = &(*self.shared);
// Check if an update is present in the back-buffer
let updated = self.updated();
if updated {
// If so, exchange our output buffer with the back-buffer, thusly
// acquiring exclusive access to the old back buffer while giving
// the producer a new back-buffer to write to.
//
// The ordering must be AcqRel, because...
//
// - Our accesses to the previous buffer must not be reordered after
// this operation (which mandates Release ordering), otherwise
// they could race with the producer accessing the freshly
// liberated buffer.
// - Our accesses from the buffer must not be reordered before this
// operation (which mandates Consume ordering, that is best
// approximated by Acquire in Rust), otherwise they would race
// with the producer writing into the buffer before publishing it.
// * This reordering may seem paradoxical, but could happen if the
// compiler or CPU correctly speculated the new buffer's index
// before that index is actually read, as well as on weird hardware
// like GPUs where CPU caches require manual synchronization.
//
let former_back_info = shared_state
.back_info
.swap(self.output_idx, Ordering::AcqRel);
// Make the old back-buffer our new output buffer
self.output_idx = former_back_info & BACK_INDEX_MASK;
}
// Tell whether an update was carried out
updated
}
/// Deprecated alias to `output_buffer()`, please use that method instead
#[cfg(any(feature = "raw", test))]
#[deprecated(
since = "5.0.5",
note = "The \"raw\" feature is deprecated as the performance \
optimization that motivated it turned out to be incorrect. \
All functionality is now available without using feature flags."
)]
pub fn raw_output_buffer(&mut self) -> &mut T {
self.output_buffer()
}
/// Deprecated alias to `update()`, please use that method instead
#[cfg(any(feature = "raw", test))]
#[deprecated(
since = "5.0.5",
note = "The \"raw\" feature is deprecated as the performance \
optimization that motivated it turned out to be incorrect. \
All functionality is now available without using feature flags."
)]
#[cfg(any(feature = "raw", test))]
pub fn raw_update(&mut self) -> bool {
self.update()
}
}
/// Triple buffer shared state
///
/// In a triple buffering communication protocol, the producer and consumer
/// share the following storage:
///
/// - Three memory buffers suitable for storing the data at hand
/// - Information about the back-buffer: which buffer is the current back-buffer
/// and whether an update was published since the last readout.
///
#[derive(Debug)]
struct SharedState<T: Send> {
/// Data storage buffers
buffers: [CachePadded<UnsafeCell<T>>; 3],
/// Information about the current back-buffer state
back_info: CachePadded<AtomicBackBufferInfo>,
}
//
#[doc(hidden)]
impl<T: Send> SharedState<T> {
/// Given (a way to generate) buffer contents and the back info, build the shared state
fn new(mut gen_buf_data: impl FnMut(usize) -> T, back_info: BackBufferInfo) -> Self {
let mut make_buf = |i| -> CachePadded<UnsafeCell<T>> {
CachePadded::new(UnsafeCell::new(gen_buf_data(i)))
};
Self {
buffers: [make_buf(0), make_buf(1), make_buf(2)],
back_info: CachePadded::new(AtomicBackBufferInfo::new(back_info)),
}
}
}
//
#[doc(hidden)]
impl<T: Clone + Send> SharedState<T> {
/// Cloning the shared state is unsafe because you must ensure that no one
/// is concurrently accessing it, since &self is enough for writing.
unsafe fn clone(&self) -> Self {
Self::new(
|i| (*self.buffers[i].get()).clone(),
self.back_info.load(Ordering::Relaxed),
)
}
}
//
#[doc(hidden)]
impl<T: PartialEq + Send> SharedState<T> {
/// Equality is unsafe for the same reason as cloning: you must ensure that
/// no one is concurrently accessing the triple buffer to avoid data races.
unsafe fn eq(&self, other: &Self) -> bool {
// Check whether the contents of all buffers are equal...
let buffers_equal = self
.buffers
.iter()
.zip(other.buffers.iter())
.all(|tuple| -> bool {
let (cell1, cell2) = tuple;
*cell1.get() == *cell2.get()
});
// ...then check whether the rest of the shared state is equal
buffers_equal
&& (self.back_info.load(Ordering::Relaxed) == other.back_info.load(Ordering::Relaxed))
}
}
//
unsafe impl<T: Send> Sync for SharedState<T> {}
// Index types used for triple buffering
//
// These types are used to index into triple buffers. In addition, the
// BackBufferInfo type is actually a bitfield, whose third bit (numerical
// value: 4) is set to 1 to indicate that the producer published an update into
// the back-buffer, and reset to 0 when the consumer fetches the update.
//
type BufferIndex = u8;
type BackBufferInfo = BufferIndex;
//
type AtomicBackBufferInfo = AtomicU8;
const BACK_INDEX_MASK: u8 = 0b11; // Mask used to extract back-buffer index
const BACK_DIRTY_BIT: u8 = 0b100; // Bit set by producer to signal updates
/// Unit tests
#[cfg(test)]
mod tests {
use super::{BufferIndex, SharedState, TripleBuffer, BACK_DIRTY_BIT, BACK_INDEX_MASK};
use std::{fmt::Debug, ops::Deref, sync::atomic::Ordering, thread, time::Duration};
use testbench::{
self,
race_cell::{RaceCell, Racey},
};
/// Check that triple buffers are properly initialized
#[test]
fn initial_state() {
// Let's create a triple buffer
let mut buf = TripleBuffer::new(42);
check_buf_state(&mut buf, false);
assert_eq!(*buf.output.read(), 42);
}
/// Check that the shared state's unsafe equality operator works
#[test]
fn partial_eq_shared() {
// Let's create some dummy shared state
let dummy_state = SharedState::<u16>::new(|i| [111, 222, 333][i], 0b10);
// Check that the dummy state is equal to itself
assert!(unsafe { dummy_state.eq(&dummy_state) });
// Check that it's not equal to a state where buffer contents differ
assert!(unsafe { !dummy_state.eq(&SharedState::<u16>::new(|i| [114, 222, 333][i], 0b10)) });
assert!(unsafe { !dummy_state.eq(&SharedState::<u16>::new(|i| [111, 225, 333][i], 0b10)) });
assert!(unsafe { !dummy_state.eq(&SharedState::<u16>::new(|i| [111, 222, 336][i], 0b10)) });
// Check that it's not equal to a state where the back info differs
assert!(unsafe {
!dummy_state.eq(&SharedState::<u16>::new(
|i| [111, 222, 333][i],
BACK_DIRTY_BIT & 0b10,
))
});
assert!(unsafe { !dummy_state.eq(&SharedState::<u16>::new(|i| [111, 222, 333][i], 0b01)) });
}
/// Check that TripleBuffer's PartialEq impl works
#[test]
fn partial_eq() {
// Create a triple buffer
let buf = TripleBuffer::new("test");
// Check that it is equal to itself
assert_eq!(buf, buf);
// Make another buffer with different contents. As buffer creation is
// deterministic, this should only have an impact on the shared state,
// but the buffers should nevertheless be considered different.
let buf2 = TripleBuffer::new("taste");
assert_eq!(buf.input.input_idx, buf2.input.input_idx);
assert_eq!(buf.output.output_idx, buf2.output.output_idx);
assert!(buf != buf2);
// Check that changing either the input or output buffer index will
// also lead two TripleBuffers to be considered different (this test
// technically creates an invalid TripleBuffer state, but it's the only
// way to check that the PartialEq impl is exhaustive)
let mut buf3 = TripleBuffer::new("test");
assert_eq!(buf, buf3);
let old_input_idx = buf3.input.input_idx;
buf3.input.input_idx = buf3.output.output_idx;
assert!(buf != buf3);
buf3.input.input_idx = old_input_idx;
buf3.output.output_idx = old_input_idx;
assert!(buf != buf3);
}
/// Check that the shared state's unsafe clone operator works
#[test]
fn clone_shared() {
// Let's create some dummy shared state
let dummy_state = SharedState::<u8>::new(|i| [123, 231, 132][i], BACK_DIRTY_BIT & 0b01);
// Now, try to clone it
let dummy_state_copy = unsafe { dummy_state.clone() };
// Check that the contents of the original state did not change
assert!(unsafe {
dummy_state.eq(&SharedState::<u8>::new(
|i| [123, 231, 132][i],
BACK_DIRTY_BIT & 0b01,
))
});
// Check that the contents of the original and final state are identical
assert!(unsafe { dummy_state.eq(&dummy_state_copy) });
}
/// Check that TripleBuffer's Clone impl works
#[test]
fn clone() {
// Create a triple buffer
let mut buf = TripleBuffer::new(4.2);
// Put it in a nontrivial state
unsafe {
*buf.input.shared.buffers[0].get() = 1.2;
*buf.input.shared.buffers[1].get() = 3.4;
*buf.input.shared.buffers[2].get() = 5.6;
}
buf.input
.shared
.back_info
.store(BACK_DIRTY_BIT & 0b01, Ordering::Relaxed);
buf.input.input_idx = 0b10;
buf.output.output_idx = 0b00;
// Now clone it
let buf_clone = buf.clone();
// Check that the clone uses its own, separate shared data storage
assert_eq!(
as_ptr(&buf_clone.output.shared),
as_ptr(&buf_clone.output.shared)
);
assert!(as_ptr(&buf_clone.input.shared) != as_ptr(&buf.input.shared));
// Check that it is identical from PartialEq's point of view
assert_eq!(buf, buf_clone);
// Check that the contents of the original buffer did not change
unsafe {
assert_eq!(*buf.input.shared.buffers[0].get(), 1.2);
assert_eq!(*buf.input.shared.buffers[1].get(), 3.4);
assert_eq!(*buf.input.shared.buffers[2].get(), 5.6);
}
assert_eq!(
buf.input.shared.back_info.load(Ordering::Relaxed),
BACK_DIRTY_BIT & 0b01
);
assert_eq!(buf.input.input_idx, 0b10);
assert_eq!(buf.output.output_idx, 0b00);
}
/// Check that the low-level publish/update primitives work
#[test]
fn swaps() {
// Create a new buffer, and a way to track any changes to it
let mut buf = TripleBuffer::new([123, 456]);
let old_buf = buf.clone();
let old_input_idx = old_buf.input.input_idx;
let old_shared = &old_buf.input.shared;
let old_back_info = old_shared.back_info.load(Ordering::Relaxed);
let old_back_idx = old_back_info & BACK_INDEX_MASK;
let old_output_idx = old_buf.output.output_idx;
// Check that updating from a clean state works
assert!(!buf.output.update());
assert_eq!(buf, old_buf);
check_buf_state(&mut buf, false);
// Check that publishing from a clean state works
assert!(!buf.input.publish());
let mut expected_buf = old_buf.clone();
expected_buf.input.input_idx = old_back_idx;
expected_buf
.input
.shared
.back_info
.store(old_input_idx | BACK_DIRTY_BIT, Ordering::Relaxed);
assert_eq!(buf, expected_buf);
check_buf_state(&mut buf, true);
// Check that overwriting a dirty state works
assert!(buf.input.publish());
let mut expected_buf = old_buf.clone();
expected_buf.input.input_idx = old_input_idx;
expected_buf
.input
.shared
.back_info
.store(old_back_idx | BACK_DIRTY_BIT, Ordering::Relaxed);
assert_eq!(buf, expected_buf);
check_buf_state(&mut buf, true);
// Check that updating from a dirty state works
assert!(buf.output.update());
expected_buf.output.output_idx = old_back_idx;
expected_buf
.output
.shared
.back_info
.store(old_output_idx, Ordering::Relaxed);
assert_eq!(buf, expected_buf);
check_buf_state(&mut buf, false);
}
/// Check that (sequentially) writing to a triple buffer works
#[test]
fn sequential_write() {
// Let's create a triple buffer
let mut buf = TripleBuffer::new(false);
// Back up the initial buffer state
let old_buf = buf.clone();
// Perform a write
buf.input.write(true);
// Check new implementation state
{
// Starting from the old buffer state...
let mut expected_buf = old_buf.clone();
// ...write the new value in and swap...
*expected_buf.input.input_buffer() = true;
expected_buf.input.publish();
// Nothing else should have changed
assert_eq!(buf, expected_buf);
check_buf_state(&mut buf, true);
}
}
/// Check that (sequentially) reading from a triple buffer works
#[test]
fn sequential_read() {
// Let's create a triple buffer and write into it
let mut buf = TripleBuffer::new(1.0);
buf.input.write(4.2);
// Test readout from dirty (freshly written) triple buffer
{
// Back up the initial buffer state
let old_buf = buf.clone();
// Read from the buffer
let result = *buf.output.read();
// Output value should be correct
assert_eq!(result, 4.2);
// Result should be equivalent to carrying out an update
let mut expected_buf = old_buf.clone();
assert!(expected_buf.output.update());
assert_eq!(buf, expected_buf);
check_buf_state(&mut buf, false);
}
// Test readout from clean (unchanged) triple buffer
{
// Back up the initial buffer state
let old_buf = buf.clone();
// Read from the buffer
let result = *buf.output.read();
// Output value should be correct
assert_eq!(result, 4.2);
// Buffer state should be unchanged
assert_eq!(buf, old_buf);
check_buf_state(&mut buf, false);
}
}
/// Check that contended concurrent reads and writes work
#[test]
#[ignore]
fn contended_concurrent_read_write() {
// We will stress the infrastructure by performing this many writes
// as a reader continuously reads the latest value
const TEST_WRITE_COUNT: usize = 100_000_000;
// This is the buffer that our reader and writer will share
let buf = TripleBuffer::new(RaceCell::new(0));
let (mut buf_input, mut buf_output) = buf.split();
// Concurrently run a writer which increments a shared value in a loop,
// and a reader which makes sure that no unexpected value slips in.
let mut last_value = 0usize;
testbench::concurrent_test_2(
move || {
for value in 1..=TEST_WRITE_COUNT {
buf_input.write(RaceCell::new(value));
}
},
move || {
while last_value < TEST_WRITE_COUNT {
let new_racey_value = buf_output.read().get();
match new_racey_value {
Racey::Consistent(new_value) => {
assert!((new_value >= last_value) && (new_value <= TEST_WRITE_COUNT));
last_value = new_value;
}
Racey::Inconsistent => {
panic!("Inconsistent state exposed by the buffer!");
}
}
}
},
);
}
/// Check that uncontended concurrent reads and writes work
///
/// **WARNING:** This test unfortunately needs to have timing-dependent
/// behaviour to do its job. If it fails for you, try the following:
///
/// - Close running applications in the background
/// - Re-run the tests with only one OS thread (--test-threads=1)
/// - Increase the writer sleep period
///
#[test]
#[ignore]
fn uncontended_concurrent_read_write() {
// We will stress the infrastructure by performing this many writes
// as a reader continuously reads the latest value
const TEST_WRITE_COUNT: usize = 625;
// This is the buffer that our reader and writer will share
let buf = TripleBuffer::new(RaceCell::new(0));
let (mut buf_input, mut buf_output) = buf.split();
// Concurrently run a writer which slowly increments a shared value,
// and a reader which checks that it can receive every update
let mut last_value = 0usize;
testbench::concurrent_test_2(
move || {
for value in 1..=TEST_WRITE_COUNT {
buf_input.write(RaceCell::new(value));
thread::yield_now();
thread::sleep(Duration::from_millis(32));
}
},
move || {
while last_value < TEST_WRITE_COUNT {
let new_racey_value = buf_output.read().get();
match new_racey_value {
Racey::Consistent(new_value) => {
assert!((new_value >= last_value) && (new_value - last_value <= 1));
last_value = new_value;
}
Racey::Inconsistent => {
panic!("Inconsistent state exposed by the buffer!");
}
}
}
},
);
}
/// Through the low-level API, the consumer is allowed to modify its
/// bufffer, which means that it will unknowingly send back data to the
/// producer. This creates new correctness requirements for the
/// synchronization protocol, which must be checked as well.
#[test]
#[ignore]
fn concurrent_bidirectional_exchange() {
// We will stress the infrastructure by performing this many writes
// as a reader continuously reads the latest value
const TEST_WRITE_COUNT: usize = 100_000_000;
// This is the buffer that our reader and writer will share
let buf = TripleBuffer::new(RaceCell::new(0));
let (mut buf_input, mut buf_output) = buf.split();
// Concurrently run a writer which increments a shared value in a loop,
// and a reader which makes sure that no unexpected value slips in.
testbench::concurrent_test_2(
move || {
for new_value in 1..=TEST_WRITE_COUNT {
match buf_input.input_buffer().get() {
Racey::Consistent(curr_value) => {
assert!(curr_value <= new_value);
}
Racey::Inconsistent => {
panic!("Inconsistent state exposed by the buffer!");
}
}
buf_input.write(RaceCell::new(new_value));
}
},
move || {
let mut last_value = 0usize;
while last_value < TEST_WRITE_COUNT {
match buf_output.output_buffer().get() {
Racey::Consistent(new_value) => {
assert!((new_value >= last_value) && (new_value <= TEST_WRITE_COUNT));
last_value = new_value;
}
Racey::Inconsistent => {
panic!("Inconsistent state exposed by the buffer!");
}
}
if buf_output.updated() {
buf_output.output_buffer().set(last_value / 2);
buf_output.update();
}
}
},
);
}
/// Range check for triple buffer indexes
#[allow(unused_comparisons)]
fn index_in_range(idx: BufferIndex) -> bool {
(idx >= 0) & (idx <= 2)
}
/// Get a pointer to the target of some reference (e.g. an &, an Arc...)
fn as_ptr<P: Deref>(ref_like: &P) -> *const P::Target {
&(**ref_like) as *const _
}
/// Check the state of a buffer, and the effect of queries on it
fn check_buf_state<T>(buf: &mut TripleBuffer<T>, expected_dirty_bit: bool)
where
T: Clone + Debug + PartialEq + Send,
{
// Make a backup of the buffer's initial state
let initial_buf = buf.clone();
// Check that the input and output point to the same shared state
assert_eq!(as_ptr(&buf.input.shared), as_ptr(&buf.output.shared));
// Access the shared state and decode back-buffer information
let back_info = buf.input.shared.back_info.load(Ordering::Relaxed);
let back_idx = back_info & BACK_INDEX_MASK;
let back_buffer_dirty = back_info & BACK_DIRTY_BIT != 0;
// Input-/output-/back-buffer indexes must be in range
assert!(index_in_range(buf.input.input_idx));
assert!(index_in_range(buf.output.output_idx));
assert!(index_in_range(back_idx));
// Input-/output-/back-buffer indexes must be distinct
assert!(buf.input.input_idx != buf.output.output_idx);
assert!(buf.input.input_idx != back_idx);
assert!(buf.output.output_idx != back_idx);
// Back-buffer must have the expected dirty bit
assert_eq!(back_buffer_dirty, expected_dirty_bit);
// Check that the "input buffer" query behaves as expected
assert_eq!(
as_ptr(&buf.input.input_buffer()),
buf.input.shared.buffers[buf.input.input_idx as usize].get()
);
assert_eq!(*buf, initial_buf);
// Check that the "consumed" query behaves as expected
assert_eq!(!buf.input.consumed(), expected_dirty_bit);
assert_eq!(*buf, initial_buf);
// Check that the output_buffer query works in the initial state
assert_eq!(
as_ptr(&buf.output.output_buffer()),
buf.output.shared.buffers[buf.output.output_idx as usize].get()
);
assert_eq!(*buf, initial_buf);
// Check that the output buffer query works in the initial state
assert_eq!(buf.output.updated(), expected_dirty_bit);
assert_eq!(*buf, initial_buf);
}
}