Source code
Revision control
Copy as Markdown
Other Tools
#![deny(missing_docs)]
//! `ThinVec` is exactly the same as `Vec`, except that it stores its `len` and `capacity` in the buffer
//! it allocates.
//!
//! This makes the memory footprint of ThinVecs lower; notably in cases where space is reserved for
//! a non-existence `ThinVec<T>`. So `Vec<ThinVec<T>>` and `Option<ThinVec<T>>::None` will waste less
//! space. Being pointer-sized also means it can be passed/stored in registers.
//!
//! Of course, any actually constructed `ThinVec` will theoretically have a bigger allocation, but
//! the fuzzy nature of allocators means that might not actually be the case.
//!
//! Properties of `Vec` that are preserved:
//! * `ThinVec::new()` doesn't allocate (it points to a statically allocated singleton)
//! * reallocation can be done in place
//! * `size_of::<ThinVec<T>>()` == `size_of::<Option<ThinVec<T>>>()`
//!
//! Properties of `Vec` that aren't preserved:
//! * `ThinVec<T>` can't ever be zero-cost roundtripped to a `Box<[T]>`, `String`, or `*mut T`
//! * `from_raw_parts` doesn't exist
//! * `ThinVec` currently doesn't bother to not-allocate for Zero Sized Types (e.g. `ThinVec<()>`),
//! but it could be done if someone cared enough to implement it.
//!
//!
//!
//! # Gecko FFI
//!
//! If you enable the gecko-ffi feature, `ThinVec` will verbatim bridge with the nsTArray type in
//! Gecko (Firefox). That is, `ThinVec` and nsTArray have identical layouts *but not ABIs*,
//! so nsTArrays/ThinVecs an be natively manipulated by C++ and Rust, and ownership can be
//! transferred across the FFI boundary (**IF YOU ARE CAREFUL, SEE BELOW!!**).
//!
//! While this feature is handy, it is also inherently dangerous to use because Rust and C++ do not
//! know about each other. Specifically, this can be an issue with non-POD types (types which
//! have destructors, move constructors, or are `!Copy`).
//!
//! ## Do Not Pass By Value
//!
//! The biggest thing to keep in mind is that **FFI functions cannot pass ThinVec/nsTArray
//! by-value**. That is, these are busted APIs:
//!
//! ```rust,ignore
//! // BAD WRONG
//! extern fn process_data(data: ThinVec<u32>) { ... }
//! // BAD WRONG
//! extern fn get_data() -> ThinVec<u32> { ... }
//! ```
//!
//! You must instead pass by-reference:
//!
//! ```rust
//! # use thin_vec::*;
//! # use std::mem;
//!
//! // Read-only access, ok!
//! extern fn process_data(data: &ThinVec<u32>) {
//! for val in data {
//! println!("{}", val);
//! }
//! }
//!
//! // Replace with empty instance to take ownership, ok!
//! extern fn consume_data(data: &mut ThinVec<u32>) {
//! let owned = mem::replace(data, ThinVec::new());
//! mem::drop(owned);
//! }
//!
//! // Mutate input, ok!
//! extern fn add_data(dataset: &mut ThinVec<u32>) {
//! dataset.push(37);
//! dataset.push(12);
//! }
//!
//! // Return via out-param, usually ok!
//! //
//! // WARNING: output must be initialized! (Empty nsTArrays are free, so just do it!)
//! extern fn get_data(output: &mut ThinVec<u32>) {
//! *output = thin_vec![1, 2, 3, 4, 5];
//! }
//! ```
//!
//! Ignorable Explanation For Those Who Really Want To Know Why:
//!
//! > The fundamental issue is that Rust and C++ can't currently communicate about destructors, and
//! > the semantics of C++ require destructors of function arguments to be run when the function
//! > returns. Whether the callee or caller is responsible for this is also platform-specific, so
//! > trying to hack around it manually would be messy.
//! >
//! > Also a type having a destructor changes its C++ ABI, because that type must actually exist
//! > in memory (unlike a trivial struct, which is often passed in registers). We don't currently
//! > have a way to communicate to Rust that this is happening, so even if we worked out the
//! > destructor issue with say, MaybeUninit, it would still be a non-starter without some RFCs
//! > to add explicit rustc support.
//! >
//! > Realistically, the best answer here is to have a "heavier" bindgen that can secretly
//! > generate FFI glue so we can pass things "by value" and have it generate by-reference code
//! > behind our back (like the cxx crate does). This would muddy up debugging/searchfox though.
//!
//! ## Types Should Be Trivially Relocatable
//!
//! Types in Rust are always trivially relocatable (unless suitably borrowed/[pinned][]/hidden).
//! This means all Rust types are legal to relocate with a bitwise copy, you cannot provide
//! copy or move constructors to execute when this happens, and the old location won't have its
//! destructor run. This will cause problems for types which have a significant location
//! (types that intrusively point into themselves or have their location registered with a service).
//!
//! While relocations are generally predictable if you're very careful, **you should avoid using
//! types with significant locations with Rust FFI**.
//!
//! Specifically, `ThinVec` will trivially relocate its contents whenever it needs to reallocate its
//! buffer to change its capacity. This is the default reallocation strategy for nsTArray, and is
//! suitable for the vast majority of types. Just be aware of this limitation!
//!
//! ## Auto Arrays Are Dangerous
//!
//! `ThinVec` has *some* support for handling auto arrays which store their buffer on the stack,
//! but this isn't well tested.
//!
//! Regardless of how much support we provide, Rust won't be aware of the buffer's limited lifetime,
//! so standard auto array safety caveats apply about returning/storing them! `ThinVec` won't ever
//! produce an auto array on its own, so this is only an issue for transferring an nsTArray into
//! Rust.
//!
//! ## Other Issues
//!
//! Standard FFI caveats also apply:
//!
//! * Rust is more strict about POD types being initialized (use MaybeUninit if you must)
//! * `ThinVec<T>` has no idea if the C++ version of `T` has move/copy/assign/delete overloads
//! * `nsTArray<T>` has no idea if the Rust version of `T` has a Drop/Clone impl
//! * C++ can do all sorts of unsound things that Rust can't catch
//! * C++ and Rust don't agree on how zero-sized/empty types should be handled
//!
//! The gecko-ffi feature will not work if you aren't linking with code that has nsTArray
//! defined. Specifically, we must share the symbol for nsTArray's empty singleton. You will get
//! linking errors if that isn't defined.
//!
//! The gecko-ffi feature also limits `ThinVec` to the legacy behaviors of nsTArray. Most notably,
//! nsTArray has a maximum capacity of i32::MAX (~2.1 billion items). Probably not an issue.
//! Probably.
//!
#![allow(clippy::comparison_chain, clippy::missing_safety_doc)]
use std::alloc::*;
use std::borrow::*;
use std::cmp::*;
use std::convert::TryFrom;
use std::convert::TryInto;
use std::hash::*;
use std::iter::FromIterator;
use std::marker::PhantomData;
use std::ops::Bound;
use std::ops::{Deref, DerefMut, RangeBounds};
use std::ptr::NonNull;
use std::slice::IterMut;
use std::{fmt, io, mem, ptr, slice};
use impl_details::*;
// modules: a simple way to cfg a whole bunch of impl details at once
#[cfg(not(feature = "gecko-ffi"))]
mod impl_details {
pub type SizeType = usize;
pub const MAX_CAP: usize = !0;
#[inline(always)]
pub fn assert_size(x: usize) -> SizeType {
x
}
}
#[cfg(feature = "gecko-ffi")]
mod impl_details {
// Support for briding a gecko nsTArray verbatim into a ThinVec.
//
// `ThinVec` can't see copy/move/delete implementations
// from C++
//
// The actual layout of an nsTArray is:
//
// ```cpp
// struct {
// uint32_t mLength;
// uint32_t mCapacity: 31;
// uint32_t mIsAutoArray: 1;
// }
// ```
//
// Rust doesn't natively support bit-fields, so we manually mask
// and shift the bit. When the "auto" bit is set, the header and buffer
// are actually on the stack, meaning the `ThinVec` pointer-to-header
// is essentially an "owned borrow", and therefore dangerous to handle.
// There are no safety guards for this situation.
//
// On little-endian platforms, the auto bit will be the high-bit of
// our capacity u32. On big-endian platforms, it will be the low bit.
// Hence we need some platform-specific CFGs for the necessary masking/shifting.
//
// `ThinVec` won't ever construct an auto array. They only happen when
// bridging from C++. This means we don't need to ever set/preserve the bit.
// We just need to be able to read and handle it if it happens to be there.
//
// Handling the auto bit mostly just means not freeing/reallocating the buffer.
pub type SizeType = u32;
pub const MAX_CAP: usize = i32::max_value() as usize;
// Little endian: the auto bit is the high bit, and the capacity is
// verbatim. So we just need to mask off the high bit. Note that
// this masking is unnecessary when packing, because assert_size
// guards against the high bit being set.
#[cfg(target_endian = "little")]
pub fn pack_capacity(cap: SizeType) -> SizeType {
cap as SizeType
}
#[cfg(target_endian = "little")]
pub fn unpack_capacity(cap: SizeType) -> usize {
(cap as usize) & !(1 << 31)
}
#[cfg(target_endian = "little")]
pub fn is_auto(cap: SizeType) -> bool {
(cap & (1 << 31)) != 0
}
// Big endian: the auto bit is the low bit, and the capacity is
// shifted up one bit. Masking out the auto bit is unnecessary,
// as rust shifts always shift in 0's for unsigned integers.
#[cfg(target_endian = "big")]
pub fn pack_capacity(cap: SizeType) -> SizeType {
(cap as SizeType) << 1
}
#[cfg(target_endian = "big")]
pub fn unpack_capacity(cap: SizeType) -> usize {
(cap >> 1) as usize
}
#[cfg(target_endian = "big")]
pub fn is_auto(cap: SizeType) -> bool {
(cap & 1) != 0
}
#[inline]
pub fn assert_size(x: usize) -> SizeType {
if x > MAX_CAP as usize {
panic!("nsTArray size may not exceed the capacity of a 32-bit sized int");
}
x as SizeType
}
}
// The header of a ThinVec.
//
// The _cap can be a bitfield, so use accessors to avoid trouble.
//
// In "real" gecko-ffi mode, the empty singleton will be aligned
// to 8 by gecko. But in tests we have to provide the singleton
// ourselves, and Rust makes it hard to "just" align a static.
// To avoid messing around with a wrapper type around the
// singleton *just* for tests, we just force all headers to be
// aligned to 8 in this weird "zombie" gecko mode.
//
// This shouldn't affect runtime layout (padding), but it will
// result in us asking the allocator to needlessly overalign
// non-empty ThinVecs containing align < 8 types in
// zombie-mode, but not in "real" geck-ffi mode. Minor.
#[cfg_attr(all(feature = "gecko-ffi", any(test, miri)), repr(align(8)))]
#[repr(C)]
struct Header {
_len: SizeType,
_cap: SizeType,
}
impl Header {
#[inline]
#[allow(clippy::unnecessary_cast)]
fn len(&self) -> usize {
self._len as usize
}
#[inline]
fn set_len(&mut self, len: usize) {
self._len = assert_size(len);
}
}
#[cfg(feature = "gecko-ffi")]
impl Header {
fn cap(&self) -> usize {
unpack_capacity(self._cap)
}
fn set_cap(&mut self, cap: usize) {
// debug check that our packing is working
debug_assert_eq!(unpack_capacity(pack_capacity(cap as SizeType)), cap);
// FIXME: this assert is busted because it reads uninit memory
// debug_assert!(!self.uses_stack_allocated_buffer());
// NOTE: this always stores a cleared auto bit, because set_cap
// is only invoked by Rust, and Rust doesn't create auto arrays.
self._cap = pack_capacity(assert_size(cap));
}
fn uses_stack_allocated_buffer(&self) -> bool {
is_auto(self._cap)
}
}
#[cfg(not(feature = "gecko-ffi"))]
impl Header {
#[allow(clippy::unnecessary_cast)]
fn cap(&self) -> usize {
self._cap as usize
}
fn set_cap(&mut self, cap: usize) {
self._cap = assert_size(cap);
}
}
/// Singleton that all empty collections share.
/// Note: can't store non-zero ZSTs, we allocate in that case. We could
/// optimize everything to not do that (basically, make ptr == len and branch
/// on size == 0 in every method), but it's a bunch of work for something that
/// doesn't matter much.
#[cfg(any(not(feature = "gecko-ffi"), test, miri))]
static EMPTY_HEADER: Header = Header { _len: 0, _cap: 0 };
#[cfg(all(feature = "gecko-ffi", not(test), not(miri)))]
extern "C" {
#[link_name = "sEmptyTArrayHeader"]
static EMPTY_HEADER: Header;
}
// Utils for computing layouts of allocations
/// Gets the size necessary to allocate a `ThinVec<T>` with the give capacity.
///
/// # Panics
///
/// This will panic if isize::MAX is overflowed at any point.
fn alloc_size<T>(cap: usize) -> usize {
// Compute "real" header size with pointer math
//
// We turn everything into isizes here so that we can catch isize::MAX overflow,
// we never want to allow allocations larger than that!
let header_size = mem::size_of::<Header>() as isize;
let padding = padding::<T>() as isize;
let data_size = if mem::size_of::<T>() == 0 {
// If we're allocating an array for ZSTs we need a header/padding but no actual
// space for items, so we don't care about the capacity that was requested!
0
} else {
let cap: isize = cap.try_into().expect("capacity overflow");
let elem_size = mem::size_of::<T>() as isize;
elem_size.checked_mul(cap).expect("capacity overflow")
};
let final_size = data_size
.checked_add(header_size + padding)
.expect("capacity overflow");
// Ok now we can turn it back into a usize (don't need to worry about negatives)
final_size as usize
}
/// Gets the padding necessary for the array of a `ThinVec<T>`
fn padding<T>() -> usize {
let alloc_align = alloc_align::<T>();
let header_size = mem::size_of::<Header>();
if alloc_align > header_size {
if cfg!(feature = "gecko-ffi") {
panic!(
"nsTArray does not handle alignment above > {} correctly",
header_size
);
}
alloc_align - header_size
} else {
0
}
}
/// Gets the align necessary to allocate a `ThinVec<T>`
fn alloc_align<T>() -> usize {
max(mem::align_of::<T>(), mem::align_of::<Header>())
}
/// Gets the layout necessary to allocate a `ThinVec<T>`
///
/// # Panics
///
/// Panics if the required size overflows `isize::MAX`.
fn layout<T>(cap: usize) -> Layout {
unsafe { Layout::from_size_align_unchecked(alloc_size::<T>(cap), alloc_align::<T>()) }
}
/// Allocates a header (and array) for a `ThinVec<T>` with the given capacity.
///
/// # Panics
///
/// Panics if the required size overflows `isize::MAX`.
fn header_with_capacity<T>(cap: usize) -> NonNull<Header> {
debug_assert!(cap > 0);
unsafe {
let layout = layout::<T>(cap);
let header = alloc(layout) as *mut Header;
if header.is_null() {
handle_alloc_error(layout)
}
// "Infinite" capacity for zero-sized types:
(*header).set_cap(if mem::size_of::<T>() == 0 {
MAX_CAP
} else {
cap
});
(*header).set_len(0);
NonNull::new_unchecked(header)
}
}
/// See the crate's top level documentation for a description of this type.
#[repr(C)]
pub struct ThinVec<T> {
ptr: NonNull<Header>,
boo: PhantomData<T>,
}
unsafe impl<T: Sync> Sync for ThinVec<T> {}
unsafe impl<T: Send> Send for ThinVec<T> {}
/// Creates a `ThinVec` containing the arguments.
///
// A hack to avoid linking problems with `cargo test --features=gecko-ffi`.
#[cfg_attr(not(feature = "gecko-ffi"), doc = "```")]
#[cfg_attr(feature = "gecko-ffi", doc = "```ignore")]
/// #[macro_use] extern crate thin_vec;
///
/// fn main() {
/// let v = thin_vec![1, 2, 3];
/// assert_eq!(v.len(), 3);
/// assert_eq!(v[0], 1);
/// assert_eq!(v[1], 2);
/// assert_eq!(v[2], 3);
///
/// let v = thin_vec![1; 3];
/// assert_eq!(v, [1, 1, 1]);
/// }
/// ```
#[macro_export]
macro_rules! thin_vec {
(@UNIT $($t:tt)*) => (());
($elem:expr; $n:expr) => ({
let mut vec = $crate::ThinVec::new();
vec.resize($n, $elem);
vec
});
() => {$crate::ThinVec::new()};
($($x:expr),*) => ({
let len = [$(thin_vec!(@UNIT $x)),*].len();
let mut vec = $crate::ThinVec::with_capacity(len);
$(vec.push($x);)*
vec
});
($($x:expr,)*) => (thin_vec![$($x),*]);
}
impl<T> ThinVec<T> {
/// Creates a new empty ThinVec.
///
/// This will not allocate.
pub fn new() -> ThinVec<T> {
ThinVec::with_capacity(0)
}
/// Constructs a new, empty `ThinVec<T>` with at least the specified capacity.
///
/// The vector will be able to hold at least `capacity` elements without
/// reallocating. This method is allowed to allocate for more elements than
/// `capacity`. If `capacity` is 0, the vector will not allocate.
///
/// It is important to note that although the returned vector has the
/// minimum *capacity* specified, the vector will have a zero *length*.
///
/// If it is important to know the exact allocated capacity of a `ThinVec`,
/// always use the [`capacity`] method after construction.
///
/// **NOTE**: unlike `Vec`, `ThinVec` **MUST** allocate once to keep track of non-zero
/// lengths. As such, we cannot provide the same guarantees about ThinVecs
/// of ZSTs not allocating. However the allocation never needs to be resized
/// to add more ZSTs, since the underlying array is still length 0.
///
/// [Capacity and reallocation]: #capacity-and-reallocation
/// [`capacity`]: Vec::capacity
///
/// # Panics
///
/// Panics if the new capacity exceeds `isize::MAX` bytes.
///
/// # Examples
///
/// ```
/// use thin_vec::ThinVec;
///
/// let mut vec = ThinVec::with_capacity(10);
///
/// // The vector contains no items, even though it has capacity for more
/// assert_eq!(vec.len(), 0);
/// assert!(vec.capacity() >= 10);
///
/// // These are all done without reallocating...
/// for i in 0..10 {
/// vec.push(i);
/// }
/// assert_eq!(vec.len(), 10);
/// assert!(vec.capacity() >= 10);
///
/// // ...but this may make the vector reallocate
/// vec.push(11);
/// assert_eq!(vec.len(), 11);
/// assert!(vec.capacity() >= 11);
///
/// // A vector of a zero-sized type will always over-allocate, since no
/// // space is needed to store the actual elements.
/// let vec_units = ThinVec::<()>::with_capacity(10);
///
/// // Only true **without** the gecko-ffi feature!
/// // assert_eq!(vec_units.capacity(), usize::MAX);
/// ```
pub fn with_capacity(cap: usize) -> ThinVec<T> {
// `padding` contains ~static assertions against types that are
// incompatible with the current feature flags. We also call it to
// invoke these assertions when getting a pointer to the `ThinVec`
// contents, but since we also get a pointer to the contents in the
// `Drop` impl, trippng an assertion along that code path causes a
// double panic. We duplicate the assertion here so that it is
// testable,
let _ = padding::<T>();
if cap == 0 {
unsafe {
ThinVec {
ptr: NonNull::new_unchecked(&EMPTY_HEADER as *const Header as *mut Header),
boo: PhantomData,
}
}
} else {
ThinVec {
ptr: header_with_capacity::<T>(cap),
boo: PhantomData,
}
}
}
// Accessor conveniences
fn ptr(&self) -> *mut Header {
self.ptr.as_ptr()
}
fn header(&self) -> &Header {
unsafe { self.ptr.as_ref() }
}
fn data_raw(&self) -> *mut T {
// `padding` contains ~static assertions against types that are
// incompatible with the current feature flags. Even if we don't
// care about its result, we should always call it before getting
// a data pointer to guard against invalid types!
let padding = padding::<T>();
// Although we ensure the data array is aligned when we allocate,
// we can't do that with the empty singleton. So when it might not
// be properly aligned, we substitute in the NonNull::dangling
// which *is* aligned.
//
// To minimize dynamic branches on `cap` for all accesses
// to the data, we include this guard which should only involve
// compile-time constants. Ideally this should result in the branch
// only be included for types with excessive alignment.
let empty_header_is_aligned = if cfg!(feature = "gecko-ffi") {
// in gecko-ffi mode `padding` will ensure this under
// the assumption that the header has size 8 and the
// static empty singleton is aligned to 8.
true
} else {
// In non-gecko-ffi mode, the empty singleton is just
// naturally aligned to the Header. If the Header is at
// least as aligned as T *and* the padding would have
// been 0, then one-past-the-end of the empty singleton
// *is* a valid data pointer and we can remove the
// `dangling` special case.
mem::align_of::<Header>() >= mem::align_of::<T>() && padding == 0
};
unsafe {
if !empty_header_is_aligned && self.header().cap() == 0 {
NonNull::dangling().as_ptr()
} else {
// This could technically result in overflow, but padding
// would have to be absurdly large for this to occur.
let header_size = mem::size_of::<Header>();
let ptr = self.ptr.as_ptr() as *mut u8;
ptr.add(header_size + padding) as *mut T
}
}
}
// This is unsafe when the header is EMPTY_HEADER.
unsafe fn header_mut(&mut self) -> &mut Header {
&mut *self.ptr()
}
/// Returns the number of elements in the vector, also referred to
/// as its 'length'.
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
///
/// let a = thin_vec![1, 2, 3];
/// assert_eq!(a.len(), 3);
/// ```
pub fn len(&self) -> usize {
self.header().len()
}
/// Returns `true` if the vector contains no elements.
///
/// # Examples
///
/// ```
/// use thin_vec::ThinVec;
///
/// let mut v = ThinVec::new();
/// assert!(v.is_empty());
///
/// v.push(1);
/// assert!(!v.is_empty());
/// ```
pub fn is_empty(&self) -> bool {
self.len() == 0
}
/// Returns the number of elements the vector can hold without
/// reallocating.
///
/// # Examples
///
/// ```
/// use thin_vec::ThinVec;
///
/// let vec: ThinVec<i32> = ThinVec::with_capacity(10);
/// assert_eq!(vec.capacity(), 10);
/// ```
pub fn capacity(&self) -> usize {
self.header().cap()
}
/// Forces the length of the vector to `new_len`.
///
/// This is a low-level operation that maintains none of the normal
/// invariants of the type. Normally changing the length of a vector
/// is done using one of the safe operations instead, such as
/// [`truncate`], [`resize`], [`extend`], or [`clear`].
///
/// [`truncate`]: ThinVec::truncate
/// [`resize`]: ThinVec::resize
/// [`extend`]: ThinVec::extend
/// [`clear`]: ThinVec::clear
///
/// # Safety
///
/// - `new_len` must be less than or equal to [`capacity()`].
/// - The elements at `old_len..new_len` must be initialized.
///
/// [`capacity()`]: ThinVec::capacity
///
/// # Examples
///
/// This method can be useful for situations in which the vector
/// is serving as a buffer for other code, particularly over FFI:
///
/// ```no_run
/// use thin_vec::ThinVec;
///
/// # // This is just a minimal skeleton for the doc example;
/// # // don't use this as a starting point for a real library.
/// # pub struct StreamWrapper { strm: *mut std::ffi::c_void }
/// # const Z_OK: i32 = 0;
/// # extern "C" {
/// # fn deflateGetDictionary(
/// # strm: *mut std::ffi::c_void,
/// # dictionary: *mut u8,
/// # dictLength: *mut usize,
/// # ) -> i32;
/// # }
/// # impl StreamWrapper {
/// pub fn get_dictionary(&self) -> Option<ThinVec<u8>> {
/// // Per the FFI method's docs, "32768 bytes is always enough".
/// let mut dict = ThinVec::with_capacity(32_768);
/// let mut dict_length = 0;
/// // SAFETY: When `deflateGetDictionary` returns `Z_OK`, it holds that:
/// // 1. `dict_length` elements were initialized.
/// // 2. `dict_length` <= the capacity (32_768)
/// // which makes `set_len` safe to call.
/// unsafe {
/// // Make the FFI call...
/// let r = deflateGetDictionary(self.strm, dict.as_mut_ptr(), &mut dict_length);
/// if r == Z_OK {
/// // ...and update the length to what was initialized.
/// dict.set_len(dict_length);
/// Some(dict)
/// } else {
/// None
/// }
/// }
/// }
/// # }
/// ```
///
/// While the following example is sound, there is a memory leak since
/// the inner vectors were not freed prior to the `set_len` call:
///
/// ```no_run
/// use thin_vec::thin_vec;
///
/// let mut vec = thin_vec![thin_vec![1, 0, 0],
/// thin_vec![0, 1, 0],
/// thin_vec![0, 0, 1]];
/// // SAFETY:
/// // 1. `old_len..0` is empty so no elements need to be initialized.
/// // 2. `0 <= capacity` always holds whatever `capacity` is.
/// unsafe {
/// vec.set_len(0);
/// }
/// ```
///
/// Normally, here, one would use [`clear`] instead to correctly drop
/// the contents and thus not leak memory.
pub unsafe fn set_len(&mut self, len: usize) {
if self.is_singleton() {
// A prerequisite of `Vec::set_len` is that `new_len` must be
// less than or equal to capacity(). The same applies here.
assert!(len == 0, "invalid set_len({}) on empty ThinVec", len);
} else {
self.header_mut().set_len(len)
}
}
// For internal use only, when setting the length and it's known to be the non-singleton.
unsafe fn set_len_non_singleton(&mut self, len: usize) {
self.header_mut().set_len(len)
}
/// Appends an element to the back of a collection.
///
/// # Panics
///
/// Panics if the new capacity exceeds `isize::MAX` bytes.
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut vec = thin_vec![1, 2];
/// vec.push(3);
/// assert_eq!(vec, [1, 2, 3]);
/// ```
pub fn push(&mut self, val: T) {
let old_len = self.len();
if old_len == self.capacity() {
self.reserve(1);
}
unsafe {
ptr::write(self.data_raw().add(old_len), val);
self.set_len_non_singleton(old_len + 1);
}
}
/// Removes the last element from a vector and returns it, or [`None`] if it
/// is empty.
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut vec = thin_vec![1, 2, 3];
/// assert_eq!(vec.pop(), Some(3));
/// assert_eq!(vec, [1, 2]);
/// ```
pub fn pop(&mut self) -> Option<T> {
let old_len = self.len();
if old_len == 0 {
return None;
}
unsafe {
self.set_len_non_singleton(old_len - 1);
Some(ptr::read(self.data_raw().add(old_len - 1)))
}
}
/// Inserts an element at position `index` within the vector, shifting all
/// elements after it to the right.
///
/// # Panics
///
/// Panics if `index > len`.
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut vec = thin_vec![1, 2, 3];
/// vec.insert(1, 4);
/// assert_eq!(vec, [1, 4, 2, 3]);
/// vec.insert(4, 5);
/// assert_eq!(vec, [1, 4, 2, 3, 5]);
/// ```
pub fn insert(&mut self, idx: usize, elem: T) {
let old_len = self.len();
assert!(idx <= old_len, "Index out of bounds");
if old_len == self.capacity() {
self.reserve(1);
}
unsafe {
let ptr = self.data_raw();
ptr::copy(ptr.add(idx), ptr.add(idx + 1), old_len - idx);
ptr::write(ptr.add(idx), elem);
self.set_len_non_singleton(old_len + 1);
}
}
/// Removes and returns the element at position `index` within the vector,
/// shifting all elements after it to the left.
///
/// Note: Because this shifts over the remaining elements, it has a
/// worst-case performance of *O*(*n*). If you don't need the order of elements
/// to be preserved, use [`swap_remove`] instead. If you'd like to remove
/// elements from the beginning of the `ThinVec`, consider using `std::collections::VecDeque`.
///
/// [`swap_remove`]: ThinVec::swap_remove
///
/// # Panics
///
/// Panics if `index` is out of bounds.
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut v = thin_vec![1, 2, 3];
/// assert_eq!(v.remove(1), 2);
/// assert_eq!(v, [1, 3]);
/// ```
pub fn remove(&mut self, idx: usize) -> T {
let old_len = self.len();
assert!(idx < old_len, "Index out of bounds");
unsafe {
self.set_len_non_singleton(old_len - 1);
let ptr = self.data_raw();
let val = ptr::read(self.data_raw().add(idx));
ptr::copy(ptr.add(idx + 1), ptr.add(idx), old_len - idx - 1);
val
}
}
/// Removes an element from the vector and returns it.
///
/// The removed element is replaced by the last element of the vector.
///
/// This does not preserve ordering, but is *O*(1).
/// If you need to preserve the element order, use [`remove`] instead.
///
/// [`remove`]: ThinVec::remove
///
/// # Panics
///
/// Panics if `index` is out of bounds.
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut v = thin_vec!["foo", "bar", "baz", "qux"];
///
/// assert_eq!(v.swap_remove(1), "bar");
/// assert_eq!(v, ["foo", "qux", "baz"]);
///
/// assert_eq!(v.swap_remove(0), "foo");
/// assert_eq!(v, ["baz", "qux"]);
/// ```
pub fn swap_remove(&mut self, idx: usize) -> T {
let old_len = self.len();
assert!(idx < old_len, "Index out of bounds");
unsafe {
let ptr = self.data_raw();
ptr::swap(ptr.add(idx), ptr.add(old_len - 1));
self.set_len_non_singleton(old_len - 1);
ptr::read(ptr.add(old_len - 1))
}
}
/// Shortens the vector, keeping the first `len` elements and dropping
/// the rest.
///
/// If `len` is greater than the vector's current length, this has no
/// effect.
///
/// The [`drain`] method can emulate `truncate`, but causes the excess
/// elements to be returned instead of dropped.
///
/// Note that this method has no effect on the allocated capacity
/// of the vector.
///
/// # Examples
///
/// Truncating a five element vector to two elements:
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut vec = thin_vec![1, 2, 3, 4, 5];
/// vec.truncate(2);
/// assert_eq!(vec, [1, 2]);
/// ```
///
/// No truncation occurs when `len` is greater than the vector's current
/// length:
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut vec = thin_vec![1, 2, 3];
/// vec.truncate(8);
/// assert_eq!(vec, [1, 2, 3]);
/// ```
///
/// Truncating when `len == 0` is equivalent to calling the [`clear`]
/// method.
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut vec = thin_vec![1, 2, 3];
/// vec.truncate(0);
/// assert_eq!(vec, []);
/// ```
///
/// [`clear`]: ThinVec::clear
/// [`drain`]: ThinVec::drain
pub fn truncate(&mut self, len: usize) {
unsafe {
// drop any extra elements
while len < self.len() {
// decrement len before the drop_in_place(), so a panic on Drop
// doesn't re-drop the just-failed value.
let new_len = self.len() - 1;
self.set_len_non_singleton(new_len);
ptr::drop_in_place(self.data_raw().add(new_len));
}
}
}
/// Clears the vector, removing all values.
///
/// Note that this method has no effect on the allocated capacity
/// of the vector.
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut v = thin_vec![1, 2, 3];
/// v.clear();
/// assert!(v.is_empty());
/// ```
pub fn clear(&mut self) {
unsafe {
ptr::drop_in_place(&mut self[..]);
self.set_len(0); // could be the singleton
}
}
/// Extracts a slice containing the entire vector.
///
/// Equivalent to `&s[..]`.
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
/// use std::io::{self, Write};
/// let buffer = thin_vec![1, 2, 3, 5, 8];
/// io::sink().write(buffer.as_slice()).unwrap();
/// ```
pub fn as_slice(&self) -> &[T] {
unsafe { slice::from_raw_parts(self.data_raw(), self.len()) }
}
/// Extracts a mutable slice of the entire vector.
///
/// Equivalent to `&mut s[..]`.
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
/// use std::io::{self, Read};
/// let mut buffer = vec![0; 3];
/// io::repeat(0b101).read_exact(buffer.as_mut_slice()).unwrap();
/// ```
pub fn as_mut_slice(&mut self) -> &mut [T] {
unsafe { slice::from_raw_parts_mut(self.data_raw(), self.len()) }
}
/// Reserve capacity for at least `additional` more elements to be inserted.
///
/// May reserve more space than requested, to avoid frequent reallocations.
///
/// Panics if the new capacity overflows `usize`.
///
/// Re-allocates only if `self.capacity() < self.len() + additional`.
#[cfg(not(feature = "gecko-ffi"))]
pub fn reserve(&mut self, additional: usize) {
let len = self.len();
let old_cap = self.capacity();
let min_cap = len.checked_add(additional).expect("capacity overflow");
if min_cap <= old_cap {
return;
}
// Ensure the new capacity is at least double, to guarantee exponential growth.
let double_cap = if old_cap == 0 {
// skip to 4 because tiny ThinVecs are dumb; but not if that would cause overflow
if mem::size_of::<T>() > (!0) / 8 {
1
} else {
4
}
} else {
old_cap.saturating_mul(2)
};
let new_cap = max(min_cap, double_cap);
unsafe {
self.reallocate(new_cap);
}
}
/// Reserve capacity for at least `additional` more elements to be inserted.
///
/// This method mimics the growth algorithm used by the C++ implementation
/// of nsTArray.
#[cfg(feature = "gecko-ffi")]
pub fn reserve(&mut self, additional: usize) {
let elem_size = mem::size_of::<T>();
let len = self.len();
let old_cap = self.capacity();
let min_cap = len.checked_add(additional).expect("capacity overflow");
if min_cap <= old_cap {
return;
}
// The growth logic can't handle zero-sized types, so we have to exit
// early here.
if elem_size == 0 {
unsafe {
self.reallocate(min_cap);
}
return;
}
let min_cap_bytes = assert_size(min_cap)
.checked_mul(assert_size(elem_size))
.and_then(|x| x.checked_add(assert_size(mem::size_of::<Header>())))
.unwrap();
// Perform some checked arithmetic to ensure all of the numbers we
// compute will end up in range.
let will_fit = min_cap_bytes.checked_mul(2).is_some();
if !will_fit {
panic!("Exceeded maximum nsTArray size");
}
const SLOW_GROWTH_THRESHOLD: usize = 8 * 1024 * 1024;
let bytes = if min_cap > SLOW_GROWTH_THRESHOLD {
// Grow by a minimum of 1.125x
let old_cap_bytes = old_cap * elem_size + mem::size_of::<Header>();
let min_growth = old_cap_bytes + (old_cap_bytes >> 3);
let growth = max(min_growth, min_cap_bytes as usize);
// Round up to the next megabyte.
const MB: usize = 1 << 20;
MB * ((growth + MB - 1) / MB)
} else {
// Try to allocate backing buffers in powers of two.
min_cap_bytes.next_power_of_two() as usize
};
let cap = (bytes - std::mem::size_of::<Header>()) / elem_size;
unsafe {
self.reallocate(cap);
}
}
/// Reserves the minimum capacity for `additional` more elements to be inserted.
///
/// Panics if the new capacity overflows `usize`.
///
/// Re-allocates only if `self.capacity() < self.len() + additional`.
pub fn reserve_exact(&mut self, additional: usize) {
let new_cap = self
.len()
.checked_add(additional)
.expect("capacity overflow");
let old_cap = self.capacity();
if new_cap > old_cap {
unsafe {
self.reallocate(new_cap);
}
}
}
/// Shrinks the capacity of the vector as much as possible.
///
/// It will drop down as close as possible to the length but the allocator
/// may still inform the vector that there is space for a few more elements.
///
/// # Examples
///
/// ```
/// use thin_vec::ThinVec;
///
/// let mut vec = ThinVec::with_capacity(10);
/// vec.extend([1, 2, 3]);
/// assert_eq!(vec.capacity(), 10);
/// vec.shrink_to_fit();
/// assert!(vec.capacity() >= 3);
/// ```
pub fn shrink_to_fit(&mut self) {
let old_cap = self.capacity();
let new_cap = self.len();
if new_cap < old_cap {
if new_cap == 0 {
*self = ThinVec::new();
} else {
unsafe {
self.reallocate(new_cap);
}
}
}
}
/// Retains only the elements specified by the predicate.
///
/// In other words, remove all elements `e` such that `f(&e)` returns `false`.
/// This method operates in place and preserves the order of the retained
/// elements.
///
/// # Examples
///
// A hack to avoid linking problems with `cargo test --features=gecko-ffi`.
#[cfg_attr(not(feature = "gecko-ffi"), doc = "```")]
#[cfg_attr(feature = "gecko-ffi", doc = "```ignore")]
/// # #[macro_use] extern crate thin_vec;
/// # fn main() {
/// let mut vec = thin_vec![1, 2, 3, 4];
/// vec.retain(|&x| x%2 == 0);
/// assert_eq!(vec, [2, 4]);
/// # }
/// ```
pub fn retain<F>(&mut self, mut f: F)
where
F: FnMut(&T) -> bool,
{
self.retain_mut(|x| f(&*x));
}
/// Retains only the elements specified by the predicate, passing a mutable reference to it.
///
/// In other words, remove all elements `e` such that `f(&mut e)` returns `false`.
/// This method operates in place and preserves the order of the retained
/// elements.
///
/// # Examples
///
// A hack to avoid linking problems with `cargo test --features=gecko-ffi`.
#[cfg_attr(not(feature = "gecko-ffi"), doc = "```")]
#[cfg_attr(feature = "gecko-ffi", doc = "```ignore")]
/// # #[macro_use] extern crate thin_vec;
/// # fn main() {
/// let mut vec = thin_vec![1, 2, 3, 4, 5];
/// vec.retain_mut(|x| {
/// *x += 1;
/// (*x)%2 == 0
/// });
/// assert_eq!(vec, [2, 4, 6]);
/// # }
/// ```
pub fn retain_mut<F>(&mut self, mut f: F)
where
F: FnMut(&mut T) -> bool,
{
let len = self.len();
let mut del = 0;
{
let v = &mut self[..];
for i in 0..len {
if !f(&mut v[i]) {
del += 1;
} else if del > 0 {
v.swap(i - del, i);
}
}
}
if del > 0 {
self.truncate(len - del);
}
}
/// Removes consecutive elements in the vector that resolve to the same key.
///
/// If the vector is sorted, this removes all duplicates.
///
/// # Examples
///
// A hack to avoid linking problems with `cargo test --features=gecko-ffi`.
#[cfg_attr(not(feature = "gecko-ffi"), doc = "```")]
#[cfg_attr(feature = "gecko-ffi", doc = "```ignore")]
/// # #[macro_use] extern crate thin_vec;
/// # fn main() {
/// let mut vec = thin_vec![10, 20, 21, 30, 20];
///
/// vec.dedup_by_key(|i| *i / 10);
///
/// assert_eq!(vec, [10, 20, 30, 20]);
/// # }
/// ```
pub fn dedup_by_key<F, K>(&mut self, mut key: F)
where
F: FnMut(&mut T) -> K,
K: PartialEq<K>,
{
self.dedup_by(|a, b| key(a) == key(b))
}
/// Removes consecutive elements in the vector according to a predicate.
///
/// The `same_bucket` function is passed references to two elements from the vector, and
/// returns `true` if the elements compare equal, or `false` if they do not. Only the first
/// of adjacent equal items is kept.
///
/// If the vector is sorted, this removes all duplicates.
///
/// # Examples
///
// A hack to avoid linking problems with `cargo test --features=gecko-ffi`.
#[cfg_attr(not(feature = "gecko-ffi"), doc = "```")]
#[cfg_attr(feature = "gecko-ffi", doc = "```ignore")]
/// # #[macro_use] extern crate thin_vec;
/// # fn main() {
/// let mut vec = thin_vec!["foo", "bar", "Bar", "baz", "bar"];
///
/// vec.dedup_by(|a, b| a.eq_ignore_ascii_case(b));
///
/// assert_eq!(vec, ["foo", "bar", "baz", "bar"]);
/// # }
/// ```
#[allow(clippy::swap_ptr_to_ref)]
pub fn dedup_by<F>(&mut self, mut same_bucket: F)
where
F: FnMut(&mut T, &mut T) -> bool,
{
// See the comments in `Vec::dedup` for a detailed explanation of this code.
unsafe {
let ln = self.len();
if ln <= 1 {
return;
}
// Avoid bounds checks by using raw pointers.
let p = self.as_mut_ptr();
let mut r: usize = 1;
let mut w: usize = 1;
while r < ln {
let p_r = p.add(r);
let p_wm1 = p.add(w - 1);
if !same_bucket(&mut *p_r, &mut *p_wm1) {
if r != w {
let p_w = p_wm1.add(1);
mem::swap(&mut *p_r, &mut *p_w);
}
w += 1;
}
r += 1;
}
self.truncate(w);
}
}
/// Splits the collection into two at the given index.
///
/// Returns a newly allocated vector containing the elements in the range
/// `[at, len)`. After the call, the original vector will be left containing
/// the elements `[0, at)` with its previous capacity unchanged.
///
/// # Panics
///
/// Panics if `at > len`.
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut vec = thin_vec![1, 2, 3];
/// let vec2 = vec.split_off(1);
/// assert_eq!(vec, [1]);
/// assert_eq!(vec2, [2, 3]);
/// ```
pub fn split_off(&mut self, at: usize) -> ThinVec<T> {
let old_len = self.len();
let new_vec_len = old_len - at;
assert!(at <= old_len, "Index out of bounds");
unsafe {
let mut new_vec = ThinVec::with_capacity(new_vec_len);
ptr::copy_nonoverlapping(self.data_raw().add(at), new_vec.data_raw(), new_vec_len);
new_vec.set_len(new_vec_len); // could be the singleton
self.set_len(at); // could be the singleton
new_vec
}
}
/// Moves all the elements of `other` into `self`, leaving `other` empty.
///
/// # Panics
///
/// Panics if the new capacity exceeds `isize::MAX` bytes.
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut vec = thin_vec![1, 2, 3];
/// let mut vec2 = thin_vec![4, 5, 6];
/// vec.append(&mut vec2);
/// assert_eq!(vec, [1, 2, 3, 4, 5, 6]);
/// assert_eq!(vec2, []);
/// ```
pub fn append(&mut self, other: &mut ThinVec<T>) {
self.extend(other.drain(..))
}
/// Removes the specified range from the vector in bulk, returning all
/// removed elements as an iterator. If the iterator is dropped before
/// being fully consumed, it drops the remaining removed elements.
///
/// The returned iterator keeps a mutable borrow on the vector to optimize
/// its implementation.
///
/// # Panics
///
/// Panics if the starting point is greater than the end point or if
/// the end point is greater than the length of the vector.
///
/// # Leaking
///
/// If the returned iterator goes out of scope without being dropped (due to
/// [`mem::forget`], for example), the vector may have lost and leaked
/// elements arbitrarily, including elements outside the range.
///
/// # Examples
///
/// ```
/// use thin_vec::{ThinVec, thin_vec};
///
/// let mut v = thin_vec![1, 2, 3];
/// let u: ThinVec<_> = v.drain(1..).collect();
/// assert_eq!(v, &[1]);
/// assert_eq!(u, &[2, 3]);
///
/// // A full range clears the vector, like `clear()` does
/// v.drain(..);
/// assert_eq!(v, &[]);
/// ```
pub fn drain<R>(&mut self, range: R) -> Drain<'_, T>
where
R: RangeBounds<usize>,
{
// See comments in the Drain struct itself for details on this
let len = self.len();
let start = match range.start_bound() {
Bound::Included(&n) => n,
Bound::Excluded(&n) => n + 1,
Bound::Unbounded => 0,
};
let end = match range.end_bound() {
Bound::Included(&n) => n + 1,
Bound::Excluded(&n) => n,
Bound::Unbounded => len,
};
assert!(start <= end);
assert!(end <= len);
unsafe {
// Set our length to the start bound
self.set_len(start); // could be the singleton
let iter =
slice::from_raw_parts_mut(self.data_raw().add(start), end - start).iter_mut();
Drain {
iter,
vec: self,
end,
tail: len - end,
}
}
}
/// Creates a splicing iterator that replaces the specified range in the vector
/// with the given `replace_with` iterator and yields the removed items.
/// `replace_with` does not need to be the same length as `range`.
///
/// `range` is removed even if the iterator is not consumed until the end.
///
/// It is unspecified how many elements are removed from the vector
/// if the `Splice` value is leaked.
///
/// The input iterator `replace_with` is only consumed when the `Splice` value is dropped.
///
/// This is optimal if:
///
/// * The tail (elements in the vector after `range`) is empty,
/// * or `replace_with` yields fewer or equal elements than `range`’s length
/// * or the lower bound of its `size_hint()` is exact.
///
/// Otherwise, a temporary vector is allocated and the tail is moved twice.
///
/// # Panics
///
/// Panics if the starting point is greater than the end point or if
/// the end point is greater than the length of the vector.
///
/// # Examples
///
/// ```
/// use thin_vec::{ThinVec, thin_vec};
///
/// let mut v = thin_vec![1, 2, 3, 4];
/// let new = [7, 8, 9];
/// let u: ThinVec<_> = v.splice(1..3, new).collect();
/// assert_eq!(v, &[1, 7, 8, 9, 4]);
/// assert_eq!(u, &[2, 3]);
/// ```
#[inline]
pub fn splice<R, I>(&mut self, range: R, replace_with: I) -> Splice<'_, I::IntoIter>
where
R: RangeBounds<usize>,
I: IntoIterator<Item = T>,
{
Splice {
drain: self.drain(range),
replace_with: replace_with.into_iter(),
}
}
/// Resize the buffer and update its capacity, without changing the length.
/// Unsafe because it can cause length to be greater than capacity.
unsafe fn reallocate(&mut self, new_cap: usize) {
debug_assert!(new_cap > 0);
if self.has_allocation() {
let old_cap = self.capacity();
let ptr = realloc(
self.ptr() as *mut u8,
layout::<T>(old_cap),
alloc_size::<T>(new_cap),
) as *mut Header;
if ptr.is_null() {
handle_alloc_error(layout::<T>(new_cap))
}
(*ptr).set_cap(new_cap);
self.ptr = NonNull::new_unchecked(ptr);
} else {
let new_header = header_with_capacity::<T>(new_cap);
// If we get here and have a non-zero len, then we must be handling
// a gecko auto array, and we have items in a stack buffer. We shouldn't
// free it, but we should memcopy the contents out of it and mark it as empty.
//
// T is assumed to be trivially relocatable, as this is ~required
// for Rust compatibility anyway. Furthermore, we assume C++ won't try
// to unconditionally destroy the contents of the stack allocated buffer
// (i.e. it's obfuscated behind a union).
//
// In effect, we are partially reimplementing the auto array move constructor
// by leaving behind a valid empty instance.
let len = self.len();
if cfg!(feature = "gecko-ffi") && len > 0 {
new_header
.as_ptr()
.add(1)
.cast::<T>()
.copy_from_nonoverlapping(self.data_raw(), len);
self.set_len_non_singleton(0);
}
self.ptr = new_header;
}
}
#[cfg(feature = "gecko-ffi")]
#[inline]
#[allow(unused_unsafe)]
fn is_singleton(&self) -> bool {
// NOTE: the tests will complain that this "unsafe" isn't needed, but it *IS*!
// In production this refers to an *extern static* which *is* unsafe to reference.
// In tests this refers to a local static because we don't have Firefox's codebase
// providing the symbol!
unsafe { self.ptr.as_ptr() as *const Header == &EMPTY_HEADER }
}
#[cfg(not(feature = "gecko-ffi"))]
#[inline]
fn is_singleton(&self) -> bool {
self.ptr.as_ptr() as *const Header == &EMPTY_HEADER
}
#[cfg(feature = "gecko-ffi")]
#[inline]
fn has_allocation(&self) -> bool {
unsafe { !self.is_singleton() && !self.ptr.as_ref().uses_stack_allocated_buffer() }
}
#[cfg(not(feature = "gecko-ffi"))]
#[inline]
fn has_allocation(&self) -> bool {
!self.is_singleton()
}
}
impl<T: Clone> ThinVec<T> {
/// Resizes the `Vec` in-place so that `len()` is equal to `new_len`.
///
/// If `new_len` is greater than `len()`, the `Vec` is extended by the
/// difference, with each additional slot filled with `value`.
/// If `new_len` is less than `len()`, the `Vec` is simply truncated.
///
/// # Examples
///
// A hack to avoid linking problems with `cargo test --features=gecko-ffi`.
#[cfg_attr(not(feature = "gecko-ffi"), doc = "```")]
#[cfg_attr(feature = "gecko-ffi", doc = "```ignore")]
/// # #[macro_use] extern crate thin_vec;
/// # fn main() {
/// let mut vec = thin_vec!["hello"];
/// vec.resize(3, "world");
/// assert_eq!(vec, ["hello", "world", "world"]);
///
/// let mut vec = thin_vec![1, 2, 3, 4];
/// vec.resize(2, 0);
/// assert_eq!(vec, [1, 2]);
/// # }
/// ```
pub fn resize(&mut self, new_len: usize, value: T) {
let old_len = self.len();
if new_len > old_len {
let additional = new_len - old_len;
self.reserve(additional);
for _ in 1..additional {
self.push(value.clone());
}
// We can write the last element directly without cloning needlessly
if additional > 0 {
self.push(value);
}
} else if new_len < old_len {
self.truncate(new_len);
}
}
/// Clones and appends all elements in a slice to the `ThinVec`.
///
/// Iterates over the slice `other`, clones each element, and then appends
/// it to this `ThinVec`. The `other` slice is traversed in-order.
///
/// Note that this function is same as [`extend`] except that it is
/// specialized to work with slices instead. If and when Rust gets
/// specialization this function will likely be deprecated (but still
/// available).
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut vec = thin_vec![1];
/// vec.extend_from_slice(&[2, 3, 4]);
/// assert_eq!(vec, [1, 2, 3, 4]);
/// ```
///
/// [`extend`]: ThinVec::extend
pub fn extend_from_slice(&mut self, other: &[T]) {
self.extend(other.iter().cloned())
}
}
impl<T: PartialEq> ThinVec<T> {
/// Removes consecutive repeated elements in the vector.
///
/// If the vector is sorted, this removes all duplicates.
///
/// # Examples
///
// A hack to avoid linking problems with `cargo test --features=gecko-ffi`.
#[cfg_attr(not(feature = "gecko-ffi"), doc = "```")]
#[cfg_attr(feature = "gecko-ffi", doc = "```ignore")]
/// # #[macro_use] extern crate thin_vec;
/// # fn main() {
/// let mut vec = thin_vec![1, 2, 2, 3, 2];
///
/// vec.dedup();
///
/// assert_eq!(vec, [1, 2, 3, 2]);
/// # }
/// ```
pub fn dedup(&mut self) {
self.dedup_by(|a, b| a == b)
}
}
impl<T> Drop for ThinVec<T> {
#[inline]
fn drop(&mut self) {
#[cold]
#[inline(never)]
fn drop_non_singleton<T>(this: &mut ThinVec<T>) {
unsafe {
ptr::drop_in_place(&mut this[..]);
#[cfg(feature = "gecko-ffi")]
if this.ptr.as_ref().uses_stack_allocated_buffer() {
return;
}
dealloc(this.ptr() as *mut u8, layout::<T>(this.capacity()))
}
}
if !self.is_singleton() {
drop_non_singleton(self);
}
}
}
impl<T> Deref for ThinVec<T> {
type Target = [T];
fn deref(&self) -> &[T] {
self.as_slice()
}
}
impl<T> DerefMut for ThinVec<T> {
fn deref_mut(&mut self) -> &mut [T] {
self.as_mut_slice()
}
}
impl<T> Borrow<[T]> for ThinVec<T> {
fn borrow(&self) -> &[T] {
self.as_slice()
}
}
impl<T> BorrowMut<[T]> for ThinVec<T> {
fn borrow_mut(&mut self) -> &mut [T] {
self.as_mut_slice()
}
}
impl<T> AsRef<[T]> for ThinVec<T> {
fn as_ref(&self) -> &[T] {
self.as_slice()
}
}
impl<T> Extend<T> for ThinVec<T> {
#[inline]
fn extend<I>(&mut self, iter: I)
where
I: IntoIterator<Item = T>,
{
let iter = iter.into_iter();
let hint = iter.size_hint().0;
if hint > 0 {
self.reserve(hint);
}
for x in iter {
self.push(x);
}
}
}
impl<T: fmt::Debug> fmt::Debug for ThinVec<T> {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
fmt::Debug::fmt(&**self, f)
}
}
impl<T> Hash for ThinVec<T>
where
T: Hash,
{
fn hash<H>(&self, state: &mut H)
where
H: Hasher,
{
self[..].hash(state);
}
}
impl<T> PartialOrd for ThinVec<T>
where
T: PartialOrd,
{
#[inline]
fn partial_cmp(&self, other: &ThinVec<T>) -> Option<Ordering> {
self[..].partial_cmp(&other[..])
}
}
impl<T> Ord for ThinVec<T>
where
T: Ord,
{
#[inline]
fn cmp(&self, other: &ThinVec<T>) -> Ordering {
self[..].cmp(&other[..])
}
}
impl<A, B> PartialEq<ThinVec<B>> for ThinVec<A>
where
A: PartialEq<B>,
{
#[inline]
fn eq(&self, other: &ThinVec<B>) -> bool {
self[..] == other[..]
}
}
impl<A, B> PartialEq<Vec<B>> for ThinVec<A>
where
A: PartialEq<B>,
{
#[inline]
fn eq(&self, other: &Vec<B>) -> bool {
self[..] == other[..]
}
}
impl<A, B> PartialEq<[B]> for ThinVec<A>
where
A: PartialEq<B>,
{
#[inline]
fn eq(&self, other: &[B]) -> bool {
self[..] == other[..]
}
}
impl<'a, A, B> PartialEq<&'a [B]> for ThinVec<A>
where
A: PartialEq<B>,
{
#[inline]
fn eq(&self, other: &&'a [B]) -> bool {
self[..] == other[..]
}
}
// Serde impls based on
#[cfg(feature = "serde")]
impl<T: serde::Serialize> serde::Serialize for ThinVec<T> {
fn serialize<S>(&self, serializer: S) -> Result<S::Ok, S::Error>
where
S: serde::Serializer,
{
serializer.collect_seq(self.as_slice())
}
}
#[cfg(feature = "serde")]
impl<'de, T: serde::Deserialize<'de>> serde::Deserialize<'de> for ThinVec<T> {
fn deserialize<D>(deserializer: D) -> Result<Self, D::Error>
where
D: serde::Deserializer<'de>,
{
use serde::de::{SeqAccess, Visitor};
use serde::Deserialize;
struct ThinVecVisitor<T>(PhantomData<T>);
impl<'de, T: Deserialize<'de>> Visitor<'de> for ThinVecVisitor<T> {
type Value = ThinVec<T>;
fn expecting(&self, formatter: &mut fmt::Formatter) -> fmt::Result {
write!(formatter, "a sequence")
}
fn visit_seq<SA>(self, mut seq: SA) -> Result<Self::Value, SA::Error>
where
SA: SeqAccess<'de>,
{
// Same policy as
let initial_capacity = seq.size_hint().unwrap_or_default().min(4096);
let mut values = ThinVec::<T>::with_capacity(initial_capacity);
while let Some(value) = seq.next_element()? {
values.push(value);
}
Ok(values)
}
}
deserializer.deserialize_seq(ThinVecVisitor::<T>(PhantomData))
}
}
macro_rules! array_impls {
($($N:expr)*) => {$(
impl<A, B> PartialEq<[B; $N]> for ThinVec<A> where A: PartialEq<B> {
#[inline]
fn eq(&self, other: &[B; $N]) -> bool { self[..] == other[..] }
}
impl<'a, A, B> PartialEq<&'a [B; $N]> for ThinVec<A> where A: PartialEq<B> {
#[inline]
fn eq(&self, other: &&'a [B; $N]) -> bool { self[..] == other[..] }
}
)*}
}
array_impls! {
0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32
}
impl<T> Eq for ThinVec<T> where T: Eq {}
impl<T> IntoIterator for ThinVec<T> {
type Item = T;
type IntoIter = IntoIter<T>;
fn into_iter(self) -> IntoIter<T> {
IntoIter {
vec: self,
start: 0,
}
}
}
impl<'a, T> IntoIterator for &'a ThinVec<T> {
type Item = &'a T;
type IntoIter = slice::Iter<'a, T>;
fn into_iter(self) -> slice::Iter<'a, T> {
self.iter()
}
}
impl<'a, T> IntoIterator for &'a mut ThinVec<T> {
type Item = &'a mut T;
type IntoIter = slice::IterMut<'a, T>;
fn into_iter(self) -> slice::IterMut<'a, T> {
self.iter_mut()
}
}
impl<T> Clone for ThinVec<T>
where
T: Clone,
{
#[inline]
fn clone(&self) -> ThinVec<T> {
#[cold]
#[inline(never)]
fn clone_non_singleton<T: Clone>(this: &ThinVec<T>) -> ThinVec<T> {
let len = this.len();
let mut new_vec = ThinVec::<T>::with_capacity(len);
let mut data_raw = new_vec.data_raw();
for x in this.iter() {
unsafe {
ptr::write(data_raw, x.clone());
data_raw = data_raw.add(1);
}
}
unsafe {
// `this` is not the singleton, but `new_vec` will be if
// `this` is empty.
new_vec.set_len(len); // could be the singleton
}
new_vec
}
if self.is_singleton() {
ThinVec::new()
} else {
clone_non_singleton(self)
}
}
}
impl<T> Default for ThinVec<T> {
fn default() -> ThinVec<T> {
ThinVec::new()
}
}
impl<T> FromIterator<T> for ThinVec<T> {
#[inline]
fn from_iter<I: IntoIterator<Item = T>>(iter: I) -> ThinVec<T> {
let mut vec = ThinVec::new();
vec.extend(iter.into_iter());
vec
}
}
impl<T: Clone> From<&[T]> for ThinVec<T> {
/// Allocate a `ThinVec<T>` and fill it by cloning `s`'s items.
///
/// # Examples
///
/// ```
/// use thin_vec::{ThinVec, thin_vec};
///
/// assert_eq!(ThinVec::from(&[1, 2, 3][..]), thin_vec![1, 2, 3]);
/// ```
fn from(s: &[T]) -> ThinVec<T> {
s.iter().cloned().collect()
}
}
#[cfg(not(no_global_oom_handling))]
impl<T: Clone> From<&mut [T]> for ThinVec<T> {
/// Allocate a `ThinVec<T>` and fill it by cloning `s`'s items.
///
/// # Examples
///
/// ```
/// use thin_vec::{ThinVec, thin_vec};
///
/// assert_eq!(ThinVec::from(&mut [1, 2, 3][..]), thin_vec![1, 2, 3]);
/// ```
fn from(s: &mut [T]) -> ThinVec<T> {
s.iter().cloned().collect()
}
}
impl<T, const N: usize> From<[T; N]> for ThinVec<T> {
/// Allocate a `ThinVec<T>` and move `s`'s items into it.
///
/// # Examples
///
/// ```
/// use thin_vec::{ThinVec, thin_vec};
///
/// assert_eq!(ThinVec::from([1, 2, 3]), thin_vec![1, 2, 3]);
/// ```
fn from(s: [T; N]) -> ThinVec<T> {
std::iter::IntoIterator::into_iter(s).collect()
}
}
impl<T> From<Box<[T]>> for ThinVec<T> {
/// Convert a boxed slice into a vector by transferring ownership of
/// the existing heap allocation.
///
/// **NOTE:** unlike `std`, this must reallocate to change the layout!
///
/// # Examples
///
/// ```
/// use thin_vec::{ThinVec, thin_vec};
///
/// let b: Box<[i32]> = thin_vec![1, 2, 3].into_iter().collect();
/// assert_eq!(ThinVec::from(b), thin_vec![1, 2, 3]);
/// ```
fn from(s: Box<[T]>) -> Self {
// Can just lean on the fact that `Box<[T]>` -> `Vec<T>` is Free.
Vec::from(s).into_iter().collect()
}
}
impl<T> From<Vec<T>> for ThinVec<T> {
/// Convert a `std::Vec` into a `ThinVec`.
///
/// **NOTE:** this must reallocate to change the layout!
///
/// # Examples
///
/// ```
/// use thin_vec::{ThinVec, thin_vec};
///
/// let b: Vec<i32> = vec![1, 2, 3];
/// assert_eq!(ThinVec::from(b), thin_vec![1, 2, 3]);
/// ```
fn from(s: Vec<T>) -> Self {
s.into_iter().collect()
}
}
impl<T> From<ThinVec<T>> for Vec<T> {
/// Convert a `ThinVec` into a `std::Vec`.
///
/// **NOTE:** this must reallocate to change the layout!
///
/// # Examples
///
/// ```
/// use thin_vec::{ThinVec, thin_vec};
///
/// let b: ThinVec<i32> = thin_vec![1, 2, 3];
/// assert_eq!(Vec::from(b), vec![1, 2, 3]);
/// ```
fn from(s: ThinVec<T>) -> Self {
s.into_iter().collect()
}
}
impl<T> From<ThinVec<T>> for Box<[T]> {
/// Convert a vector into a boxed slice.
///
/// If `v` has excess capacity, its items will be moved into a
/// newly-allocated buffer with exactly the right capacity.
///
/// **NOTE:** unlike `std`, this must reallocate to change the layout!
///
/// # Examples
///
/// ```
/// use thin_vec::{ThinVec, thin_vec};
/// assert_eq!(Box::from(thin_vec![1, 2, 3]), thin_vec![1, 2, 3].into_iter().collect());
/// ```
fn from(v: ThinVec<T>) -> Self {
v.into_iter().collect()
}
}
impl From<&str> for ThinVec<u8> {
/// Allocate a `ThinVec<u8>` and fill it with a UTF-8 string.
///
/// # Examples
///
/// ```
/// use thin_vec::{ThinVec, thin_vec};
///
/// assert_eq!(ThinVec::from("123"), thin_vec![b'1', b'2', b'3']);
/// ```
fn from(s: &str) -> ThinVec<u8> {
From::from(s.as_bytes())
}
}
impl<T, const N: usize> TryFrom<ThinVec<T>> for [T; N] {
type Error = ThinVec<T>;
/// Gets the entire contents of the `ThinVec<T>` as an array,
/// if its size exactly matches that of the requested array.
///
/// # Examples
///
/// ```
/// use thin_vec::{ThinVec, thin_vec};
/// use std::convert::TryInto;
///
/// assert_eq!(thin_vec![1, 2, 3].try_into(), Ok([1, 2, 3]));
/// assert_eq!(<ThinVec<i32>>::new().try_into(), Ok([]));
/// ```
///
/// If the length doesn't match, the input comes back in `Err`:
/// ```
/// use thin_vec::{ThinVec, thin_vec};
/// use std::convert::TryInto;
///
/// let r: Result<[i32; 4], _> = (0..10).collect::<ThinVec<_>>().try_into();
/// assert_eq!(r, Err(thin_vec![0, 1, 2, 3, 4, 5, 6, 7, 8, 9]));
/// ```
///
/// If you're fine with just getting a prefix of the `ThinVec<T>`,
/// you can call [`.truncate(N)`](ThinVec::truncate) first.
/// ```
/// use thin_vec::{ThinVec, thin_vec};
/// use std::convert::TryInto;
///
/// let mut v = ThinVec::from("hello world");
/// v.sort();
/// v.truncate(2);
/// let [a, b]: [_; 2] = v.try_into().unwrap();
/// assert_eq!(a, b' ');
/// assert_eq!(b, b'd');
/// ```
fn try_from(mut vec: ThinVec<T>) -> Result<[T; N], ThinVec<T>> {
if vec.len() != N {
return Err(vec);
}
// SAFETY: `.set_len(0)` is always sound.
unsafe { vec.set_len(0) };
// SAFETY: A `ThinVec`'s pointer is always aligned properly, and
// the alignment the array needs is the same as the items.
// We checked earlier that we have sufficient items.
// The items will not double-drop as the `set_len`
// tells the `ThinVec` not to also drop them.
let array = unsafe { ptr::read(vec.data_raw() as *const [T; N]) };
Ok(array)
}
}
/// An iterator that moves out of a vector.
///
/// This `struct` is created by the [`ThinVec::into_iter`][]
/// (provided by the [`IntoIterator`] trait).
///
/// # Example
///
/// ```
/// use thin_vec::thin_vec;
///
/// let v = thin_vec![0, 1, 2];
/// let iter: thin_vec::IntoIter<_> = v.into_iter();
/// ```
pub struct IntoIter<T> {
vec: ThinVec<T>,
start: usize,
}
impl<T> IntoIter<T> {
/// Returns the remaining items of this iterator as a slice.
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
///
/// let vec = thin_vec!['a', 'b', 'c'];
/// let mut into_iter = vec.into_iter();
/// assert_eq!(into_iter.as_slice(), &['a', 'b', 'c']);
/// let _ = into_iter.next().unwrap();
/// assert_eq!(into_iter.as_slice(), &['b', 'c']);
/// ```
pub fn as_slice(&self) -> &[T] {
unsafe { slice::from_raw_parts(self.vec.data_raw().add(self.start), self.len()) }
}
/// Returns the remaining items of this iterator as a mutable slice.
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
///
/// let vec = thin_vec!['a', 'b', 'c'];
/// let mut into_iter = vec.into_iter();
/// assert_eq!(into_iter.as_slice(), &['a', 'b', 'c']);
/// into_iter.as_mut_slice()[2] = 'z';
/// assert_eq!(into_iter.next().unwrap(), 'a');
/// assert_eq!(into_iter.next().unwrap(), 'b');
/// assert_eq!(into_iter.next().unwrap(), 'z');
/// ```
pub fn as_mut_slice(&mut self) -> &mut [T] {
unsafe { &mut *self.as_raw_mut_slice() }
}
fn as_raw_mut_slice(&mut self) -> *mut [T] {
unsafe { ptr::slice_from_raw_parts_mut(self.vec.data_raw().add(self.start), self.len()) }
}
}
impl<T> Iterator for IntoIter<T> {
type Item = T;
fn next(&mut self) -> Option<T> {
if self.start == self.vec.len() {
None
} else {
unsafe {
let old_start = self.start;
self.start += 1;
Some(ptr::read(self.vec.data_raw().add(old_start)))
}
}
}
fn size_hint(&self) -> (usize, Option<usize>) {
let len = self.vec.len() - self.start;
(len, Some(len))
}
}
impl<T> DoubleEndedIterator for IntoIter<T> {
fn next_back(&mut self) -> Option<T> {
if self.start == self.vec.len() {
None
} else {
self.vec.pop()
}
}
}
impl<T> ExactSizeIterator for IntoIter<T> {}
impl<T> std::iter::FusedIterator for IntoIter<T> {}
// SAFETY: the length calculation is trivial, we're an array! And if it's wrong we're So Screwed.
#[cfg(feature = "unstable")]
unsafe impl<T> std::iter::TrustedLen for IntoIter<T> {}
impl<T> Drop for IntoIter<T> {
#[inline]
fn drop(&mut self) {
#[cold]
#[inline(never)]
fn drop_non_singleton<T>(this: &mut IntoIter<T>) {
unsafe {
let mut vec = mem::replace(&mut this.vec, ThinVec::new());
ptr::drop_in_place(&mut vec[this.start..]);
vec.set_len_non_singleton(0)
}
}
if !self.vec.is_singleton() {
drop_non_singleton(self);
}
}
}
impl<T: fmt::Debug> fmt::Debug for IntoIter<T> {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
f.debug_tuple("IntoIter").field(&self.as_slice()).finish()
}
}
impl<T> AsRef<[T]> for IntoIter<T> {
fn as_ref(&self) -> &[T] {
self.as_slice()
}
}
impl<T: Clone> Clone for IntoIter<T> {
#[allow(clippy::into_iter_on_ref)]
fn clone(&self) -> Self {
// Just create a new `ThinVec` from the remaining elements and IntoIter it
self.as_slice()
.into_iter()
.cloned()
.collect::<ThinVec<_>>()
.into_iter()
}
}
/// A draining iterator for `ThinVec<T>`.
///
/// This `struct` is created by [`ThinVec::drain`].
/// See its documentation for more.
///
/// # Example
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut v = thin_vec![0, 1, 2];
/// let iter: thin_vec::Drain<_> = v.drain(..);
/// ```
pub struct Drain<'a, T> {
// Ok so ThinVec::drain takes a range of the ThinVec and yields the contents by-value,
// then backshifts the array. During iteration the array is in an unsound state
// (big deinitialized hole in it), and this is very dangerous.
//
// Our first line of defense is the borrow checker: we have a mutable borrow, so nothing
// can access the ThinVec while we exist. As long as we make sure the ThinVec is in a valid
// state again before we release the borrow, everything should be A-OK! We do this cleanup
// in our Drop impl.
//
// Unfortunately, that's unsound, because mem::forget exists and The Leakpocalypse Is Real.
// So we can't actually guarantee our destructor runs before our borrow expires. Thankfully
// this isn't fatal: we can just set the ThinVec's len to 0 at the start, so if anyone
// leaks the Drain, we just leak everything the ThinVec contained out of spite! If they
// *don't* leak us then we can properly repair the len in our Drop impl. This is known
// as "leak amplification", and is the same approach std uses.
//
// But we can do slightly better than setting the len to 0! The drain breaks us up into
// these parts:
//
// ```text
//
// [A, B, C, D, E, F, G, H, _, _]
// ____ __________ ____ ____
// | | | |
// prefix drain tail spare-cap
// ```
//
// As the drain iterator is consumed from both ends (DoubleEnded!), we'll start to look
// like this:
//
// ```text
// [A, B, _, _, E, _, G, H, _, _]
// ____ __________ ____ ____
// | | | |
// prefix drain tail spare-cap
// ```
//
// Note that the prefix is always valid and untouched, as such we can set the len
// to the prefix when doing leak-amplification. As a bonus, we can use this value
// to remember where the drain range starts. At the end we'll look like this
// (we exhaust ourselves in our Drop impl):
//
// ```text
// [A, B, _, _, _, _, G, H, _, _]
// _____ __________ _____ ____
// | | | |
// len drain tail spare-cap
// ```
//
// And need to become this:
//
// ```text
// [A, B, G, H, _, _, _, _, _, _]
// ___________ ________________
// | |
// len spare-cap
// ```
//
// All this requires is moving the tail back to the prefix (stored in `len`)
// and setting `len` to `len + tail_len` to undo the leak amplification.
/// An iterator over the elements we're removing.
///
/// As we go we'll be `read`ing out of the mutable refs yielded by this.
/// It's ok to use IterMut here because it promises to only take mutable
/// refs to the parts we haven't yielded yet.
///
/// A downside of this (and the *mut below) is that it makes this type invariant, when
/// technically it could be covariant?
iter: IterMut<'a, T>,
/// The actual ThinVec, which we need to hold onto to undo the leak amplification
/// and backshift the tail into place. This should only be accessed when we're
/// completely done with the IterMut in the `drop` impl of this type (or miri will get mad).
///
/// Since we set the `len` of this to be before `IterMut`, we can use that `len`
/// to retrieve the index of the start of the drain range later.
vec: *mut ThinVec<T>,
/// The one-past-the-end index of the drain range, or equivalently the start of the tail.
end: usize,
/// The length of the tail.
tail: usize,
}
impl<'a, T> Iterator for Drain<'a, T> {
type Item = T;
fn next(&mut self) -> Option<T> {
self.iter.next().map(|x| unsafe { ptr::read(x) })
}
fn size_hint(&self) -> (usize, Option<usize>) {
self.iter.size_hint()
}
}
impl<'a, T> DoubleEndedIterator for Drain<'a, T> {
fn next_back(&mut self) -> Option<T> {
self.iter.next_back().map(|x| unsafe { ptr::read(x) })
}
}
impl<'a, T> ExactSizeIterator for Drain<'a, T> {}
// SAFETY: we need to keep track of this perfectly Or Else anyway!
#[cfg(feature = "unstable")]
unsafe impl<T> std::iter::TrustedLen for Drain<'_, T> {}
impl<T> std::iter::FusedIterator for Drain<'_, T> {}
impl<'a, T> Drop for Drain<'a, T> {
fn drop(&mut self) {
// Consume the rest of the iterator.
for _ in self.by_ref() {}
// Move the tail over the drained items, and update the length.
unsafe {
let vec = &mut *self.vec;
// Don't mutate the empty singleton!
if !vec.is_singleton() {
let old_len = vec.len();
let start = vec.data_raw().add(old_len);
let end = vec.data_raw().add(self.end);
ptr::copy(end, start, self.tail);
vec.set_len_non_singleton(old_len + self.tail);
}
}
}
}
impl<T: fmt::Debug> fmt::Debug for Drain<'_, T> {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
f.debug_tuple("Drain").field(&self.iter.as_slice()).finish()
}
}
impl<'a, T> Drain<'a, T> {
/// Returns the remaining items of this iterator as a slice.
///
/// # Examples
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut vec = thin_vec!['a', 'b', 'c'];
/// let mut drain = vec.drain(..);
/// assert_eq!(drain.as_slice(), &['a', 'b', 'c']);
/// let _ = drain.next().unwrap();
/// assert_eq!(drain.as_slice(), &['b', 'c']);
/// ```
#[must_use]
pub fn as_slice(&self) -> &[T] {
// SAFETY: this is A-OK because the elements that the underlying
// iterator still points at are still logically initialized and contiguous.
self.iter.as_slice()
}
}
impl<'a, T> AsRef<[T]> for Drain<'a, T> {
fn as_ref(&self) -> &[T] {
self.as_slice()
}
}
/// A splicing iterator for `ThinVec`.
///
/// This struct is created by [`ThinVec::splice`][].
/// See its documentation for more.
///
/// # Example
///
/// ```
/// use thin_vec::thin_vec;
///
/// let mut v = thin_vec![0, 1, 2];
/// let new = [7, 8];
/// let iter: thin_vec::Splice<_> = v.splice(1.., new);
/// ```
#[derive(Debug)]
pub struct Splice<'a, I: Iterator + 'a> {
drain: Drain<'a, I::Item>,
replace_with: I,
}
impl<I: Iterator> Iterator for Splice<'_, I> {
type Item = I::Item;
fn next(&mut self) -> Option<Self::Item> {
self.drain.next()
}
fn size_hint(&self) -> (usize, Option<usize>) {
self.drain.size_hint()
}
}
impl<I: Iterator> DoubleEndedIterator for Splice<'_, I> {
fn next_back(&mut self) -> Option<Self::Item> {
self.drain.next_back()
}
}
impl<I: Iterator> ExactSizeIterator for Splice<'_, I> {}
impl<I: Iterator> Drop for Splice<'_, I> {
fn drop(&mut self) {
// Ensure we've fully drained out the range
self.drain.by_ref().for_each(drop);
unsafe {
// If there's no tail elements, then the inner ThinVec is already
// correct and we can just extend it like normal.
if self.drain.tail == 0 {
(*self.drain.vec).extend(self.replace_with.by_ref());
return;
}
// First fill the range left by drain().
if !self.drain.fill(&mut self.replace_with) {
return;
}
// There may be more elements. Use the lower bound as an estimate.
let (lower_bound, _upper_bound) = self.replace_with.size_hint();
if lower_bound > 0 {
self.drain.move_tail(lower_bound);
if !self.drain.fill(&mut self.replace_with) {
return;
}
}
// Collect any remaining elements.
// This is a zero-length vector which does not allocate if `lower_bound` was exact.
let mut collected = self
.replace_with
.by_ref()
.collect::<Vec<I::Item>>()
.into_iter();
// Now we have an exact count.
if collected.len() > 0 {
self.drain.move_tail(collected.len());
let filled = self.drain.fill(&mut collected);
debug_assert!(filled);
debug_assert_eq!(collected.len(), 0);
}
}
// Let `Drain::drop` move the tail back if necessary and restore `vec.len`.
}
}
/// Private helper methods for `Splice::drop`
impl<T> Drain<'_, T> {
/// The range from `self.vec.len` to `self.tail_start` contains elements
/// that have been moved out.
/// Fill that range as much as possible with new elements from the `replace_with` iterator.
/// Returns `true` if we filled the entire range. (`replace_with.next()` didn’t return `None`.)
unsafe fn fill<I: Iterator<Item = T>>(&mut self, replace_with: &mut I) -> bool {
let vec = unsafe { &mut *self.vec };
let range_start = vec.len();
let range_end = self.end;
let range_slice = unsafe {
slice::from_raw_parts_mut(vec.data_raw().add(range_start), range_end - range_start)
};
for place in range_slice {
if let Some(new_item) = replace_with.next() {
unsafe { ptr::write(place, new_item) };
vec.set_len(vec.len() + 1);
} else {
return false;
}
}
true
}
/// Makes room for inserting more elements before the tail.
unsafe fn move_tail(&mut self, additional: usize) {
let vec = unsafe { &mut *self.vec };
let len = self.end + self.tail;
vec.reserve(len.checked_add(additional).expect("capacity overflow"));
let new_tail_start = self.end + additional;
unsafe {
let src = vec.data_raw().add(self.end);
let dst = vec.data_raw().add(new_tail_start);
ptr::copy(src, dst, self.tail);
}
self.end = new_tail_start;
}
}
/// Write is implemented for `ThinVec<u8>` by appending to the vector.
/// The vector will grow as needed.
/// This implementation is identical to the one for `Vec<u8>`.
impl io::Write for ThinVec<u8> {
#[inline]
fn write(&mut self, buf: &[u8]) -> io::Result<usize> {
self.extend_from_slice(buf);
Ok(buf.len())
}
#[inline]
fn write_all(&mut self, buf: &[u8]) -> io::Result<()> {
self.extend_from_slice(buf);
Ok(())
}
#[inline]
fn flush(&mut self) -> io::Result<()> {
Ok(())
}
}
// TODO: a million Index impls
#[cfg(test)]
mod tests {
use super::{ThinVec, MAX_CAP};
#[test]
fn test_size_of() {
use std::mem::size_of;
assert_eq!(size_of::<ThinVec<u8>>(), size_of::<&u8>());
assert_eq!(size_of::<Option<ThinVec<u8>>>(), size_of::<&u8>());
}
#[test]
fn test_drop_empty() {
ThinVec::<u8>::new();
}
#[test]
fn test_data_ptr_alignment() {
let v = ThinVec::<u16>::new();
assert!(v.data_raw() as usize % 2 == 0);
let v = ThinVec::<u32>::new();
assert!(v.data_raw() as usize % 4 == 0);
let v = ThinVec::<u64>::new();
assert!(v.data_raw() as usize % 8 == 0);
}
#[test]
#[cfg_attr(feature = "gecko-ffi", should_panic)]
fn test_overaligned_type_is_rejected_for_gecko_ffi_mode() {
#[repr(align(16))]
struct Align16(u8);
let v = ThinVec::<Align16>::new();
assert!(v.data_raw() as usize % 16 == 0);
}
#[test]
fn test_partial_eq() {
assert_eq!(thin_vec![0], thin_vec![0]);
assert_ne!(thin_vec![0], thin_vec![1]);
assert_eq!(thin_vec![1, 2, 3], vec![1, 2, 3]);
}
#[test]
fn test_alloc() {
let mut v = ThinVec::new();
assert!(!v.has_allocation());
v.push(1);
assert!(v.has_allocation());
v.pop();
assert!(v.has_allocation());
v.shrink_to_fit();
assert!(!v.has_allocation());
v.reserve(64);
assert!(v.has_allocation());
v = ThinVec::with_capacity(64);
assert!(v.has_allocation());
v = ThinVec::with_capacity(0);
assert!(!v.has_allocation());
}
#[test]
fn test_drain_items() {
let mut vec = thin_vec![1, 2, 3];
let mut vec2 = thin_vec![];
for i in vec.drain(..) {
vec2.push(i);
}
assert_eq!(vec, []);
assert_eq!(vec2, [1, 2, 3]);
}
#[test]
fn test_drain_items_reverse() {
let mut vec = thin_vec![1, 2, 3];
let mut vec2 = thin_vec![];
for i in vec.drain(..).rev() {
vec2.push(i);
}
assert_eq!(vec, []);
assert_eq!(vec2, [3, 2, 1]);
}
#[test]
fn test_drain_items_zero_sized() {
let mut vec = thin_vec![(), (), ()];
let mut vec2 = thin_vec![];
for i in vec.drain(..) {
vec2.push(i);
}
assert_eq!(vec, []);
assert_eq!(vec2, [(), (), ()]);
}
#[test]
#[should_panic]
fn test_drain_out_of_bounds() {
let mut v = thin_vec![1, 2, 3, 4, 5];
v.drain(5..6);
}
#[test]
fn test_drain_range() {
let mut v = thin_vec![1, 2, 3, 4, 5];
for _ in v.drain(4..) {}
assert_eq!(v, &[1, 2, 3, 4]);
let mut v: ThinVec<_> = (1..6).map(|x| x.to_string()).collect();
for _ in v.drain(1..4) {}
assert_eq!(v, &[1.to_string(), 5.to_string()]);
let mut v: ThinVec<_> = (1..6).map(|x| x.to_string()).collect();
for _ in v.drain(1..4).rev() {}
assert_eq!(v, &[1.to_string(), 5.to_string()]);
let mut v: ThinVec<_> = thin_vec![(); 5];
for _ in v.drain(1..4).rev() {}
assert_eq!(v, &[(), ()]);
}
#[test]
fn test_drain_max_vec_size() {
let mut v = ThinVec::<()>::with_capacity(MAX_CAP);
unsafe {
v.set_len(MAX_CAP);
}
for _ in v.drain(MAX_CAP - 1..) {}
assert_eq!(v.len(), MAX_CAP - 1);
}
#[test]
fn test_clear() {
let mut v = ThinVec::<i32>::new();
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
v.clear();
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
v.push(1);
v.push(2);
assert_eq!(v.len(), 2);
assert!(v.capacity() >= 2);
assert_eq!(&v[..], &[1, 2]);
v.clear();
assert_eq!(v.len(), 0);
assert!(v.capacity() >= 2);
assert_eq!(&v[..], &[]);
v.push(3);
v.push(4);
assert_eq!(v.len(), 2);
assert!(v.capacity() >= 2);
assert_eq!(&v[..], &[3, 4]);
v.clear();
assert_eq!(v.len(), 0);
assert!(v.capacity() >= 2);
assert_eq!(&v[..], &[]);
v.clear();
assert_eq!(v.len(), 0);
assert!(v.capacity() >= 2);
assert_eq!(&v[..], &[]);
}
#[test]
fn test_empty_singleton_torture() {
{
let mut v = ThinVec::<i32>::new();
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert!(v.is_empty());
assert_eq!(&v[..], &[]);
assert_eq!(&mut v[..], &mut []);
assert_eq!(v.pop(), None);
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
{
let v = ThinVec::<i32>::new();
assert_eq!(v.into_iter().count(), 0);
let v = ThinVec::<i32>::new();
for _ in v.into_iter() {
unreachable!();
}
}
{
let mut v = ThinVec::<i32>::new();
assert_eq!(v.drain(..).len(), 0);
for _ in v.drain(..) {
unreachable!()
}
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
{
let mut v = ThinVec::<i32>::new();
assert_eq!(v.splice(.., []).len(), 0);
for _ in v.splice(.., []) {
unreachable!()
}
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
{
let mut v = ThinVec::<i32>::new();
v.truncate(1);
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
v.truncate(0);
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
{
let mut v = ThinVec::<i32>::new();
v.shrink_to_fit();
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
{
let mut v = ThinVec::<i32>::new();
let new = v.split_off(0);
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
assert_eq!(new.len(), 0);
assert_eq!(new.capacity(), 0);
assert_eq!(&new[..], &[]);
}
{
let mut v = ThinVec::<i32>::new();
let mut other = ThinVec::<i32>::new();
v.append(&mut other);
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
assert_eq!(other.len(), 0);
assert_eq!(other.capacity(), 0);
assert_eq!(&other[..], &[]);
}
{
let mut v = ThinVec::<i32>::new();
v.reserve(0);
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
{
let mut v = ThinVec::<i32>::new();
v.reserve_exact(0);
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
{
let mut v = ThinVec::<i32>::new();
v.reserve(0);
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
{
let v = ThinVec::<i32>::with_capacity(0);
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
{
let v = ThinVec::<i32>::default();
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
{
let mut v = ThinVec::<i32>::new();
v.retain(|_| unreachable!());
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
{
let mut v = ThinVec::<i32>::new();
v.retain_mut(|_| unreachable!());
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
{
let mut v = ThinVec::<i32>::new();
v.dedup_by_key(|x| *x);
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
{
let mut v = ThinVec::<i32>::new();
v.dedup_by(|_, _| unreachable!());
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
{
let v = ThinVec::<i32>::new();
let v = v.clone();
assert_eq!(v.len(), 0);
assert_eq!(v.capacity(), 0);
assert_eq!(&v[..], &[]);
}
}
#[test]
fn test_clone() {
let mut v = ThinVec::<i32>::new();
assert!(v.is_singleton());
v.push(0);
v.pop();
assert!(!v.is_singleton());
let v2 = v.clone();
assert!(v2.is_singleton());
}
}
#[cfg(test)]
mod std_tests {
#![allow(clippy::reversed_empty_ranges)]
use super::*;
use std::mem::size_of;
use std::usize;
struct DropCounter<'a> {
count: &'a mut u32,
}
impl<'a> Drop for DropCounter<'a> {
fn drop(&mut self) {
*self.count += 1;
}
}
#[test]
fn test_small_vec_struct() {
assert!(size_of::<ThinVec<u8>>() == size_of::<usize>());
}
#[test]
fn test_double_drop() {
struct TwoVec<T> {
x: ThinVec<T>,
y: ThinVec<T>,
}
let (mut count_x, mut count_y) = (0, 0);
{
let mut tv = TwoVec {
x: ThinVec::new(),
y: ThinVec::new(),
};
tv.x.push(DropCounter {
count: &mut count_x,
});
tv.y.push(DropCounter {
count: &mut count_y,
});
// If ThinVec had a drop flag, here is where it would be zeroed.
// Instead, it should rely on its internal state to prevent
// doing anything significant when dropped multiple times.
drop(tv.x);
// Here tv goes out of scope, tv.y should be dropped, but not tv.x.
}
assert_eq!(count_x, 1);
assert_eq!(count_y, 1);
}
#[test]
fn test_reserve() {
let mut v = ThinVec::new();
assert_eq!(v.capacity(), 0);
v.reserve(2);
assert!(v.capacity() >= 2);
for i in 0..16 {
v.push(i);
}
assert!(v.capacity() >= 16);
v.reserve(16);
assert!(v.capacity() >= 32);
v.push(16);
v.reserve(16);
assert!(v.capacity() >= 33)
}
#[test]
fn test_extend() {
let mut v = ThinVec::<usize>::new();
let mut w = ThinVec::new();
v.extend(w.clone());
assert_eq!(v, &[]);
v.extend(0..3);
for i in 0..3 {
w.push(i)
}
assert_eq!(v, w);
v.extend(3..10);
for i in 3..10 {
w.push(i)
}
assert_eq!(v, w);
v.extend(w.clone()); // specializes to `append`
assert!(v.iter().eq(w.iter().chain(w.iter())));
// Zero sized types
#[derive(PartialEq, Debug)]
struct Foo;
let mut a = ThinVec::new();
let b = thin_vec![Foo, Foo];
a.extend(b);
assert_eq!(a, &[Foo, Foo]);
// Double drop
let mut count_x = 0;
{
let mut x = ThinVec::new();
let y = thin_vec![DropCounter {
count: &mut count_x
}];
x.extend(y);
}
assert_eq!(count_x, 1);
}
/* TODO: implement extend for Iter<&Copy>
#[test]
fn test_extend_ref() {
let mut v = thin_vec![1, 2];
v.extend(&[3, 4, 5]);
assert_eq!(v.len(), 5);
assert_eq!(v, [1, 2, 3, 4, 5]);
let w = thin_vec![6, 7];
v.extend(&w);
assert_eq!(v.len(), 7);
assert_eq!(v, [1, 2, 3, 4, 5, 6, 7]);
}
*/
#[test]
fn test_slice_from_mut() {
let mut values = thin_vec![1, 2, 3, 4, 5];
{
let slice = &mut values[2..];
assert!(slice == [3, 4, 5]);
for p in slice {
*p += 2;
}
}
assert!(values == [1, 2, 5, 6, 7]);
}
#[test]
fn test_slice_to_mut() {
let mut values = thin_vec![1, 2, 3, 4, 5];
{
let slice = &mut values[..2];
assert!(slice == [1, 2]);
for p in slice {
*p += 1;
}
}
assert!(values == [2, 3, 3, 4, 5]);
}
#[test]
fn test_split_at_mut() {
let mut values = thin_vec![1, 2, 3, 4, 5];
{
let (left, right) = values.split_at_mut(2);
{
let left: &[_] = left;
assert!(left[..left.len()] == [1, 2]);
}
for p in left {
*p += 1;
}
{
let right: &[_] = right;
assert!(right[..right.len()] == [3, 4, 5]);
}
for p in right {
*p += 2;
}
}
assert_eq!(values, [2, 3, 5, 6, 7]);
}
#[test]
fn test_clone() {
let v: ThinVec<i32> = thin_vec![];
let w = thin_vec![1, 2, 3];
assert_eq!(v, v.clone());
let z = w.clone();
assert_eq!(w, z);
// they should be disjoint in memory.
assert!(w.as_ptr() != z.as_ptr())
}
#[test]
fn test_clone_from() {
let mut v = thin_vec![];
let three: ThinVec<Box<_>> = thin_vec![Box::new(1), Box::new(2), Box::new(3)];
let two: ThinVec<Box<_>> = thin_vec![Box::new(4), Box::new(5)];
// zero, long
v.clone_from(&three);
assert_eq!(v, three);
// equal
v.clone_from(&three);
assert_eq!(v, three);
// long, short
v.clone_from(&two);
assert_eq!(v, two);
// short, long
v.clone_from(&three);
assert_eq!(v, three)
}
#[test]
fn test_retain() {
let mut vec = thin_vec![1, 2, 3, 4];
vec.retain(|&x| x % 2 == 0);
assert_eq!(vec, [2, 4]);
}
#[test]
fn test_retain_mut() {
let mut vec = thin_vec![9, 9, 9, 9];
let mut i = 0;
vec.retain_mut(|x| {
i += 1;
*x = i;
i != 4
});
assert_eq!(vec, [1, 2, 3]);
}
#[test]
fn test_dedup() {
fn case(a: ThinVec<i32>, b: ThinVec<i32>) {
let mut v = a;
v.dedup();
assert_eq!(v, b);
}
case(thin_vec![], thin_vec![]);
case(thin_vec![1], thin_vec![1]);
case(thin_vec![1, 1], thin_vec![1]);
case(thin_vec![1, 2, 3], thin_vec![1, 2, 3]);
case(thin_vec![1, 1, 2, 3], thin_vec![1, 2, 3]);
case(thin_vec![1, 2, 2, 3], thin_vec![1, 2, 3]);
case(thin_vec![1, 2, 3, 3], thin_vec![1, 2, 3]);
case(thin_vec![1, 1, 2, 2, 2, 3, 3], thin_vec![1, 2, 3]);
}
#[test]
fn test_dedup_by_key() {
fn case(a: ThinVec<i32>, b: ThinVec<i32>) {
let mut v = a;
v.dedup_by_key(|i| *i / 10);
assert_eq!(v, b);
}
case(thin_vec![], thin_vec![]);
case(thin_vec![10], thin_vec![10]);
case(thin_vec![10, 11], thin_vec![10]);
case(thin_vec![10, 20, 30], thin_vec![10, 20, 30]);
case(thin_vec![10, 11, 20, 30], thin_vec![10, 20, 30]);
case(thin_vec![10, 20, 21, 30], thin_vec![10, 20, 30]);
case(thin_vec![10, 20, 30, 31], thin_vec![10, 20, 30]);
case(thin_vec![10, 11, 20, 21, 22, 30, 31], thin_vec![10, 20, 30]);
}
#[test]
fn test_dedup_by() {
let mut vec = thin_vec!["foo", "bar", "Bar", "baz", "bar"];
vec.dedup_by(|a, b| a.eq_ignore_ascii_case(b));
assert_eq!(vec, ["foo", "bar", "baz", "bar"]);
let mut vec = thin_vec![("foo", 1), ("foo", 2), ("bar", 3), ("bar", 4), ("bar", 5)];
vec.dedup_by(|a, b| {
a.0 == b.0 && {
b.1 += a.1;
true
}
});
assert_eq!(vec, [("foo", 3), ("bar", 12)]);
}
#[test]
fn test_dedup_unique() {
let mut v0: ThinVec<Box<_>> = thin_vec![Box::new(1), Box::new(1), Box::new(2), Box::new(3)];
v0.dedup();
let mut v1: ThinVec<Box<_>> = thin_vec![Box::new(1), Box::new(2), Box::new(2), Box::new(3)];
v1.dedup();
let mut v2: ThinVec<Box<_>> = thin_vec![Box::new(1), Box::new(2), Box::new(3), Box::new(3)];
v2.dedup();
// If the boxed pointers were leaked or otherwise misused, valgrind
// and/or rt should raise errors.
}
#[test]
fn zero_sized_values() {
let mut v = ThinVec::new();
assert_eq!(v.len(), 0);
v.push(());
assert_eq!(v.len(), 1);
v.push(());
assert_eq!(v.len(), 2);
assert_eq!(v.pop(), Some(()));
assert_eq!(v.pop(), Some(()));
assert_eq!(v.pop(), None);
assert_eq!(v.iter().count(), 0);
v.push(());
assert_eq!(v.iter().count(), 1);
v.push(());
assert_eq!(v.iter().count(), 2);
for &() in &v {}
assert_eq!(v.iter_mut().count(), 2);
v.push(());
assert_eq!(v.iter_mut().count(), 3);
v.push(());
assert_eq!(v.iter_mut().count(), 4);
for &mut () in &mut v {}
unsafe {
v.set_len(0);
}
assert_eq!(v.iter_mut().count(), 0);
}
#[test]
fn test_partition() {
assert_eq!(
thin_vec![].into_iter().partition(|x: &i32| *x < 3),
(thin_vec![], thin_vec![])
);
assert_eq!(
thin_vec![1, 2, 3].into_iter().partition(|x| *x < 4),
(thin_vec![1, 2, 3], thin_vec![])
);
assert_eq!(
thin_vec![1, 2, 3].into_iter().partition(|x| *x < 2),
(thin_vec![1], thin_vec![2, 3])
);
assert_eq!(
thin_vec![1, 2, 3].into_iter().partition(|x| *x < 0),
(thin_vec![], thin_vec![1, 2, 3])
);
}
#[test]
fn test_zip_unzip() {
let z1 = thin_vec![(1, 4), (2, 5), (3, 6)];
let (left, right): (ThinVec<_>, ThinVec<_>) = z1.iter().cloned().unzip();
assert_eq!((1, 4), (left[0], right[0]));
assert_eq!((2, 5), (left[1], right[1]));
assert_eq!((3, 6), (left[2], right[2]));
}
#[test]
fn test_vec_truncate_drop() {
static mut DROPS: u32 = 0;
struct Elem(i32);
impl Drop for Elem {
fn drop(&mut self) {
unsafe {
DROPS += 1;
}
}
}
let mut v = thin_vec![Elem(1), Elem(2), Elem(3), Elem(4), Elem(5)];
assert_eq!(unsafe { DROPS }, 0);
v.truncate(3);
assert_eq!(unsafe { DROPS }, 2);
v.truncate(0);
assert_eq!(unsafe { DROPS }, 5);
}
#[test]
#[should_panic]
fn test_vec_truncate_fail() {
struct BadElem(i32);
impl Drop for BadElem {
fn drop(&mut self) {
let BadElem(ref mut x) = *self;
if *x == 0xbadbeef {
panic!("BadElem panic: 0xbadbeef")
}
}
}
let mut v = thin_vec![BadElem(1), BadElem(2), BadElem(0xbadbeef), BadElem(4)];
v.truncate(0);
}
#[test]
fn test_index() {
let vec = thin_vec![1, 2, 3];
assert!(vec[1] == 2);
}
#[test]
#[should_panic]
fn test_index_out_of_bounds() {
let vec = thin_vec![1, 2, 3];
let _ = vec[3];
}
#[test]
#[should_panic]
fn test_slice_out_of_bounds_1() {
let x = thin_vec![1, 2, 3, 4, 5];
let _ = &x[!0..];
}
#[test]
#[should_panic]
fn test_slice_out_of_bounds_2() {
let x = thin_vec![1, 2, 3, 4, 5];
let _ = &x[..6];
}
#[test]
#[should_panic]
fn test_slice_out_of_bounds_3() {
let x = thin_vec![1, 2, 3, 4, 5];
let _ = &x[!0..4];
}
#[test]
#[should_panic]
fn test_slice_out_of_bounds_4() {
let x = thin_vec![1, 2, 3, 4, 5];
let _ = &x[1..6];
}
#[test]
#[should_panic]
fn test_slice_out_of_bounds_5() {
let x = thin_vec![1, 2, 3, 4, 5];
let _ = &x[3..2];
}
#[test]
#[should_panic]
fn test_swap_remove_empty() {
let mut vec = ThinVec::<i32>::new();
vec.swap_remove(0);
}
#[test]
fn test_move_items() {
let vec = thin_vec![1, 2, 3];
let mut vec2 = thin_vec![];
for i in vec {
vec2.push(i);
}
assert_eq!(vec2, [1, 2, 3]);
}
#[test]
fn test_move_items_reverse() {
let vec = thin_vec![1, 2, 3];
let mut vec2 = thin_vec![];
for i in vec.into_iter().rev() {
vec2.push(i);
}
assert_eq!(vec2, [3, 2, 1]);
}
#[test]
fn test_move_items_zero_sized() {
let vec = thin_vec![(), (), ()];
let mut vec2 = thin_vec![];
for i in vec {
vec2.push(i);
}
assert_eq!(vec2, [(), (), ()]);
}
#[test]
fn test_drain_items() {
let mut vec = thin_vec![1, 2, 3];
let mut vec2 = thin_vec![];
for i in vec.drain(..) {
vec2.push(i);
}
assert_eq!(vec, []);
assert_eq!(vec2, [1, 2, 3]);
}
#[test]
fn test_drain_items_reverse() {
let mut vec = thin_vec![1, 2, 3];
let mut vec2 = thin_vec![];
for i in vec.drain(..).rev() {
vec2.push(i);
}
assert_eq!(vec, []);
assert_eq!(vec2, [3, 2, 1]);
}
#[test]
fn test_drain_items_zero_sized() {
let mut vec = thin_vec![(), (), ()];
let mut vec2 = thin_vec![];
for i in vec.drain(..) {
vec2.push(i);
}
assert_eq!(vec, []);
assert_eq!(vec2, [(), (), ()]);
}
#[test]
#[should_panic]
fn test_drain_out_of_bounds() {
let mut v = thin_vec![1, 2, 3, 4, 5];
v.drain(5..6);
}
#[test]
fn test_drain_range() {
let mut v = thin_vec![1, 2, 3, 4, 5];
for _ in v.drain(4..) {}
assert_eq!(v, &[1, 2, 3, 4]);
let mut v: ThinVec<_> = (1..6).map(|x| x.to_string()).collect();
for _ in v.drain(1..4) {}
assert_eq!(v, &[1.to_string(), 5.to_string()]);
let mut v: ThinVec<_> = (1..6).map(|x| x.to_string()).collect();
for _ in v.drain(1..4).rev() {}
assert_eq!(v, &[1.to_string(), 5.to_string()]);
let mut v: ThinVec<_> = thin_vec![(); 5];
for _ in v.drain(1..4).rev() {}
assert_eq!(v, &[(), ()]);
}
#[test]
fn test_drain_inclusive_range() {
let mut v = thin_vec!['a', 'b', 'c', 'd', 'e'];
for _ in v.drain(1..=3) {}
assert_eq!(v, &['a', 'e']);
let mut v: ThinVec<_> = (0..=5).map(|x| x.to_string()).collect();
for _ in v.drain(1..=5) {}
assert_eq!(v, &["0".to_string()]);
let mut v: ThinVec<String> = (0..=5).map(|x| x.to_string()).collect();
for _ in v.drain(0..=5) {}
assert_eq!(v, ThinVec::<String>::new());
let mut v: ThinVec<_> = (0..=5).map(|x| x.to_string()).collect();
for _ in v.drain(0..=3) {}
assert_eq!(v, &["4".to_string(), "5".to_string()]);
let mut v: ThinVec<_> = (0..=1).map(|x| x.to_string()).collect();
for _ in v.drain(..=0) {}
assert_eq!(v, &["1".to_string()]);
}
#[test]
#[cfg(not(feature = "gecko-ffi"))]
fn test_drain_max_vec_size() {
let mut v = ThinVec::<()>::with_capacity(usize::max_value());
unsafe {
v.set_len(usize::max_value());
}
for _ in v.drain(usize::max_value() - 1..) {}
assert_eq!(v.len(), usize::max_value() - 1);
let mut v = ThinVec::<()>::with_capacity(usize::max_value());
unsafe {
v.set_len(usize::max_value());
}
for _ in v.drain(usize::max_value() - 1..=usize::max_value() - 1) {}
assert_eq!(v.len(), usize::max_value() - 1);
}
#[test]
#[should_panic]
fn test_drain_inclusive_out_of_bounds() {
let mut v = thin_vec![1, 2, 3, 4, 5];
v.drain(5..=5);
}
#[test]
fn test_splice() {
let mut v = thin_vec![1, 2, 3, 4, 5];
let a = [10, 11, 12];
v.splice(2..4, a.iter().cloned());
assert_eq!(v, &[1, 2, 10, 11, 12, 5]);
v.splice(1..3, Some(20));
assert_eq!(v, &[1, 20, 11, 12, 5]);
}
#[test]
fn test_splice_inclusive_range() {
let mut v = thin_vec![1, 2, 3, 4, 5];
let a = [10, 11, 12];
let t1: ThinVec<_> = v.splice(2..=3, a.iter().cloned()).collect();
assert_eq!(v, &[1, 2, 10, 11, 12, 5]);
assert_eq!(t1, &[3, 4]);
let t2: ThinVec<_> = v.splice(1..=2, Some(20)).collect();
assert_eq!(v, &[1, 20, 11, 12, 5]);
assert_eq!(t2, &[2, 10]);
}
#[test]
#[should_panic]
fn test_splice_out_of_bounds() {
let mut v = thin_vec![1, 2, 3, 4, 5];
let a = [10, 11, 12];
v.splice(5..6, a.iter().cloned());
}
#[test]
#[should_panic]
fn test_splice_inclusive_out_of_bounds() {
let mut v = thin_vec![1, 2, 3, 4, 5];
let a = [10, 11, 12];
v.splice(5..=5, a.iter().cloned());
}
#[test]
fn test_splice_items_zero_sized() {
let mut vec = thin_vec![(), (), ()];
let vec2 = thin_vec![];
let t: ThinVec<_> = vec.splice(1..2, vec2.iter().cloned()).collect();
assert_eq!(vec, &[(), ()]);
assert_eq!(t, &[()]);
}
#[test]
fn test_splice_unbounded() {
let mut vec = thin_vec![1, 2, 3, 4, 5];
let t: ThinVec<_> = vec.splice(.., None).collect();
assert_eq!(vec, &[]);
assert_eq!(t, &[1, 2, 3, 4, 5]);
}
#[test]
fn test_splice_forget() {
let mut v = thin_vec![1, 2, 3, 4, 5];
let a = [10, 11, 12];
::std::mem::forget(v.splice(2..4, a.iter().cloned()));
assert_eq!(v, &[1, 2]);
}
#[test]
fn test_splice_from_empty() {
let mut v = thin_vec![];
let a = [10, 11, 12];
v.splice(.., a.iter().cloned());
assert_eq!(v, &[10, 11, 12]);
}
/* probs won't ever impl this
#[test]
fn test_into_boxed_slice() {
let xs = thin_vec![1, 2, 3];
let ys = xs.into_boxed_slice();
assert_eq!(&*ys, [1, 2, 3]);
}
*/
#[test]
fn test_append() {
let mut vec = thin_vec![1, 2, 3];
let mut vec2 = thin_vec![4, 5, 6];
vec.append(&mut vec2);
assert_eq!(vec, [1, 2, 3, 4, 5, 6]);
assert_eq!(vec2, []);
}
#[test]
fn test_split_off() {
let mut vec = thin_vec![1, 2, 3, 4, 5, 6];
let vec2 = vec.split_off(4);
assert_eq!(vec, [1, 2, 3, 4]);
assert_eq!(vec2, [5, 6]);
}
#[test]
fn test_into_iter_as_slice() {
let vec = thin_vec!['a', 'b', 'c'];
let mut into_iter = vec.into_iter();
assert_eq!(into_iter.as_slice(), &['a', 'b', 'c']);
let _ = into_iter.next().unwrap();
assert_eq!(into_iter.as_slice(), &['b', 'c']);
let _ = into_iter.next().unwrap();
let _ = into_iter.next().unwrap();
assert_eq!(into_iter.as_slice(), &[]);
}
#[test]
fn test_into_iter_as_mut_slice() {
let vec = thin_vec!['a', 'b', 'c'];
let mut into_iter = vec.into_iter();
assert_eq!(into_iter.as_slice(), &['a', 'b', 'c']);
into_iter.as_mut_slice()[0] = 'x';
into_iter.as_mut_slice()[1] = 'y';
assert_eq!(into_iter.next().unwrap(), 'x');
assert_eq!(into_iter.as_slice(), &['y', 'c']);
}
#[test]
fn test_into_iter_debug() {
let vec = thin_vec!['a', 'b', 'c'];
let into_iter = vec.into_iter();
let debug = format!("{:?}", into_iter);
assert_eq!(debug, "IntoIter(['a', 'b', 'c'])");
}
#[test]
fn test_into_iter_count() {
assert_eq!(thin_vec![1, 2, 3].into_iter().count(), 3);
}
#[test]
fn test_into_iter_clone() {
fn iter_equal<I: Iterator<Item = i32>>(it: I, slice: &[i32]) {
let v: ThinVec<i32> = it.collect();
assert_eq!(&v[..], slice);
}
let mut it = thin_vec![1, 2, 3].into_iter();
iter_equal(it.clone(), &[1, 2, 3]);
assert_eq!(it.next(), Some(1));
let mut it = it.rev();
iter_equal(it.clone(), &[3, 2]);
assert_eq!(it.next(), Some(3));
iter_equal(it.clone(), &[2]);
assert_eq!(it.next(), Some(2));
iter_equal(it.clone(), &[]);
assert_eq!(it.next(), None);
}
/* TODO: make drain covariant
#[allow(dead_code)]
fn assert_covariance() {
fn drain<'new>(d: Drain<'static, &'static str>) -> Drain<'new, &'new str> {
d
}
fn into_iter<'new>(i: IntoIter<&'static str>) -> IntoIter<&'new str> {
i
}
}
*/
/* TODO: specialize vec.into_iter().collect::<ThinVec<_>>();
#[test]
fn from_into_inner() {
let vec = thin_vec![1, 2, 3];
let ptr = vec.as_ptr();
let vec = vec.into_iter().collect::<ThinVec<_>>();
assert_eq!(vec, [1, 2, 3]);
assert_eq!(vec.as_ptr(), ptr);
let ptr = &vec[1] as *const _;
let mut it = vec.into_iter();
it.next().unwrap();
let vec = it.collect::<ThinVec<_>>();
assert_eq!(vec, [2, 3]);
assert!(ptr != vec.as_ptr());
}
*/
#[test]
#[cfg_attr(feature = "gecko-ffi", ignore)]
fn overaligned_allocations() {
#[repr(align(256))]
struct Foo(usize);
let mut v = thin_vec![Foo(273)];
for i in 0..0x1000 {
v.reserve_exact(i);
assert!(v[0].0 == 273);
assert!(v.as_ptr() as usize & 0xff == 0);
v.shrink_to_fit();
assert!(v[0].0 == 273);
assert!(v.as_ptr() as usize & 0xff == 0);
}
}
/* TODO: implement drain_filter?
#[test]
fn drain_filter_empty() {
let mut vec: ThinVec<i32> = thin_vec![];
{
let mut iter = vec.drain_filter(|_| true);
assert_eq!(iter.size_hint(), (0, Some(0)));
assert_eq!(iter.next(), None);
assert_eq!(iter.size_hint(), (0, Some(0)));
assert_eq!(iter.next(), None);
assert_eq!(iter.size_hint(), (0, Some(0)));
}
assert_eq!(vec.len(), 0);
assert_eq!(vec, thin_vec![]);
}
#[test]
fn drain_filter_zst() {
let mut vec = thin_vec![(), (), (), (), ()];
let initial_len = vec.len();
let mut count = 0;
{
let mut iter = vec.drain_filter(|_| true);
assert_eq!(iter.size_hint(), (0, Some(initial_len)));
while let Some(_) = iter.next() {
count += 1;
assert_eq!(iter.size_hint(), (0, Some(initial_len - count)));
}
assert_eq!(iter.size_hint(), (0, Some(0)));
assert_eq!(iter.next(), None);
assert_eq!(iter.size_hint(), (0, Some(0)));
}
assert_eq!(count, initial_len);
assert_eq!(vec.len(), 0);
assert_eq!(vec, thin_vec![]);
}
#[test]
fn drain_filter_false() {
let mut vec = thin_vec![1, 2, 3, 4, 5, 6, 7, 8, 9, 10];
let initial_len = vec.len();
let mut count = 0;
{
let mut iter = vec.drain_filter(|_| false);
assert_eq!(iter.size_hint(), (0, Some(initial_len)));
for _ in iter.by_ref() {
count += 1;
}
assert_eq!(iter.size_hint(), (0, Some(0)));
assert_eq!(iter.next(), None);
assert_eq!(iter.size_hint(), (0, Some(0)));
}
assert_eq!(count, 0);
assert_eq!(vec.len(), initial_len);
assert_eq!(vec, thin_vec![1, 2, 3, 4, 5, 6, 7, 8, 9, 10]);
}
#[test]
fn drain_filter_true() {
let mut vec = thin_vec![1, 2, 3, 4, 5, 6, 7, 8, 9, 10];
let initial_len = vec.len();
let mut count = 0;
{
let mut iter = vec.drain_filter(|_| true);
assert_eq!(iter.size_hint(), (0, Some(initial_len)));
while let Some(_) = iter.next() {
count += 1;
assert_eq!(iter.size_hint(), (0, Some(initial_len - count)));
}
assert_eq!(iter.size_hint(), (0, Some(0)));
assert_eq!(iter.next(), None);
assert_eq!(iter.size_hint(), (0, Some(0)));
}
assert_eq!(count, initial_len);
assert_eq!(vec.len(), 0);
assert_eq!(vec, thin_vec![]);
}
#[test]
fn drain_filter_complex() {
{ // [+xxx++++++xxxxx++++x+x++]
let mut vec = thin_vec![1,
2, 4, 6,
7, 9, 11, 13, 15, 17,
18, 20, 22, 24, 26,
27, 29, 31, 33,
34,
35,
36,
37, 39];
let removed = vec.drain_filter(|x| *x % 2 == 0).collect::<ThinVec<_>>();
assert_eq!(removed.len(), 10);
assert_eq!(removed, thin_vec![2, 4, 6, 18, 20, 22, 24, 26, 34, 36]);
assert_eq!(vec.len(), 14);
assert_eq!(vec, thin_vec![1, 7, 9, 11, 13, 15, 17, 27, 29, 31, 33, 35, 37, 39]);
}
{ // [xxx++++++xxxxx++++x+x++]
let mut vec = thin_vec![2, 4, 6,
7, 9, 11, 13, 15, 17,
18, 20, 22, 24, 26,
27, 29, 31, 33,
34,
35,
36,
37, 39];
let removed = vec.drain_filter(|x| *x % 2 == 0).collect::<ThinVec<_>>();
assert_eq!(removed.len(), 10);
assert_eq!(removed, thin_vec![2, 4, 6, 18, 20, 22, 24, 26, 34, 36]);
assert_eq!(vec.len(), 13);
assert_eq!(vec, thin_vec![7, 9, 11, 13, 15, 17, 27, 29, 31, 33, 35, 37, 39]);
}
{ // [xxx++++++xxxxx++++x+x]
let mut vec = thin_vec![2, 4, 6,
7, 9, 11, 13, 15, 17,
18, 20, 22, 24, 26,
27, 29, 31, 33,
34,
35,
36];
let removed = vec.drain_filter(|x| *x % 2 == 0).collect::<ThinVec<_>>();
assert_eq!(removed.len(), 10);
assert_eq!(removed, thin_vec![2, 4, 6, 18, 20, 22, 24, 26, 34, 36]);
assert_eq!(vec.len(), 11);
assert_eq!(vec, thin_vec![7, 9, 11, 13, 15, 17, 27, 29, 31, 33, 35]);
}
{ // [xxxxxxxxxx+++++++++++]
let mut vec = thin_vec![2, 4, 6, 8, 10, 12, 14, 16, 18, 20,
1, 3, 5, 7, 9, 11, 13, 15, 17, 19];
let removed = vec.drain_filter(|x| *x % 2 == 0).collect::<ThinVec<_>>();
assert_eq!(removed.len(), 10);
assert_eq!(removed, thin_vec![2, 4, 6, 8, 10, 12, 14, 16, 18, 20]);
assert_eq!(vec.len(), 10);
assert_eq!(vec, thin_vec![1, 3, 5, 7, 9, 11, 13, 15, 17, 19]);
}
{ // [+++++++++++xxxxxxxxxx]
let mut vec = thin_vec![1, 3, 5, 7, 9, 11, 13, 15, 17, 19,
2, 4, 6, 8, 10, 12, 14, 16, 18, 20];
let removed = vec.drain_filter(|x| *x % 2 == 0).collect::<ThinVec<_>>();
assert_eq!(removed.len(), 10);
assert_eq!(removed, thin_vec![2, 4, 6, 8, 10, 12, 14, 16, 18, 20]);
assert_eq!(vec.len(), 10);
assert_eq!(vec, thin_vec![1, 3, 5, 7, 9, 11, 13, 15, 17, 19]);
}
}
*/
#[test]
fn test_reserve_exact() {
// This is all the same as test_reserve
let mut v = ThinVec::new();
assert_eq!(v.capacity(), 0);
v.reserve_exact(2);
assert!(v.capacity() >= 2);
for i in 0..16 {
v.push(i);
}
assert!(v.capacity() >= 16);
v.reserve_exact(16);
assert!(v.capacity() >= 32);
v.push(16);
v.reserve_exact(16);
assert!(v.capacity() >= 33)
}
/* TODO: implement try_reserve
#[test]
fn test_try_reserve() {
// These are the interesting cases:
// * exactly isize::MAX should never trigger a CapacityOverflow (can be OOM)
// * > isize::MAX should always fail
// * On 16/32-bit should CapacityOverflow
// * On 64-bit should OOM
// * overflow may trigger when adding `len` to `cap` (in number of elements)
// * overflow may trigger when multiplying `new_cap` by size_of::<T> (to get bytes)
const MAX_CAP: usize = isize::MAX as usize;
const MAX_USIZE: usize = usize::MAX;
// On 16/32-bit, we check that allocations don't exceed isize::MAX,
// on 64-bit, we assume the OS will give an OOM for such a ridiculous size.
// Any platform that succeeds for these requests is technically broken with
// ptr::offset because LLVM is the worst.
let guards_against_isize = size_of::<usize>() < 8;
{
// Note: basic stuff is checked by test_reserve
let mut empty_bytes: ThinVec<u8> = ThinVec::new();
// Check isize::MAX doesn't count as an overflow
if let Err(CapacityOverflow) = empty_bytes.try_reserve(MAX_CAP) {
panic!("isize::MAX shouldn't trigger an overflow!");
}
// Play it again, frank! (just to be sure)
if let Err(CapacityOverflow) = empty_bytes.try_reserve(MAX_CAP) {
panic!("isize::MAX shouldn't trigger an overflow!");
}
if guards_against_isize {
// Check isize::MAX + 1 does count as overflow
if let Err(CapacityOverflow) = empty_bytes.try_reserve(MAX_CAP + 1) {
} else { panic!("isize::MAX + 1 should trigger an overflow!") }
// Check usize::MAX does count as overflow
if let Err(CapacityOverflow) = empty_bytes.try_reserve(MAX_USIZE) {
} else { panic!("usize::MAX should trigger an overflow!") }
} else {
// Check isize::MAX + 1 is an OOM
if let Err(AllocErr) = empty_bytes.try_reserve(MAX_CAP + 1) {
} else { panic!("isize::MAX + 1 should trigger an OOM!") }
// Check usize::MAX is an OOM
if let Err(AllocErr) = empty_bytes.try_reserve(MAX_USIZE) {
} else { panic!("usize::MAX should trigger an OOM!") }
}
}
{
// Same basic idea, but with non-zero len
let mut ten_bytes: ThinVec<u8> = thin_vec![1, 2, 3, 4, 5, 6, 7, 8, 9, 10];
if let Err(CapacityOverflow) = ten_bytes.try_reserve(MAX_CAP - 10) {
panic!("isize::MAX shouldn't trigger an overflow!");
}
if let Err(CapacityOverflow) = ten_bytes.try_reserve(MAX_CAP - 10) {
panic!("isize::MAX shouldn't trigger an overflow!");
}
if guards_against_isize {
if let Err(CapacityOverflow) = ten_bytes.try_reserve(MAX_CAP - 9) {
} else { panic!("isize::MAX + 1 should trigger an overflow!"); }
} else {
if let Err(AllocErr) = ten_bytes.try_reserve(MAX_CAP - 9) {
} else { panic!("isize::MAX + 1 should trigger an OOM!") }
}
// Should always overflow in the add-to-len
if let Err(CapacityOverflow) = ten_bytes.try_reserve(MAX_USIZE) {
} else { panic!("usize::MAX should trigger an overflow!") }
}
{
// Same basic idea, but with interesting type size
let mut ten_u32s: ThinVec<u32> = thin_vec![1, 2, 3, 4, 5, 6, 7, 8, 9, 10];
if let Err(CapacityOverflow) = ten_u32s.try_reserve(MAX_CAP/4 - 10) {
panic!("isize::MAX shouldn't trigger an overflow!");
}
if let Err(CapacityOverflow) = ten_u32s.try_reserve(MAX_CAP/4 - 10) {
panic!("isize::MAX shouldn't trigger an overflow!");
}
if guards_against_isize {
if let Err(CapacityOverflow) = ten_u32s.try_reserve(MAX_CAP/4 - 9) {
} else { panic!("isize::MAX + 1 should trigger an overflow!"); }
} else {
if let Err(AllocErr) = ten_u32s.try_reserve(MAX_CAP/4 - 9) {
} else { panic!("isize::MAX + 1 should trigger an OOM!") }
}
// Should fail in the mul-by-size
if let Err(CapacityOverflow) = ten_u32s.try_reserve(MAX_USIZE - 20) {
} else {
panic!("usize::MAX should trigger an overflow!");
}
}
}
#[test]
fn test_try_reserve_exact() {
// This is exactly the same as test_try_reserve with the method changed.
// See that test for comments.
const MAX_CAP: usize = isize::MAX as usize;
const MAX_USIZE: usize = usize::MAX;
let guards_against_isize = size_of::<usize>() < 8;
{
let mut empty_bytes: ThinVec<u8> = ThinVec::new();
if let Err(CapacityOverflow) = empty_bytes.try_reserve_exact(MAX_CAP) {
panic!("isize::MAX shouldn't trigger an overflow!");
}
if let Err(CapacityOverflow) = empty_bytes.try_reserve_exact(MAX_CAP) {
panic!("isize::MAX shouldn't trigger an overflow!");
}
if guards_against_isize {
if let Err(CapacityOverflow) = empty_bytes.try_reserve_exact(MAX_CAP + 1) {
} else { panic!("isize::MAX + 1 should trigger an overflow!") }
if let Err(CapacityOverflow) = empty_bytes.try_reserve_exact(MAX_USIZE) {
} else { panic!("usize::MAX should trigger an overflow!") }
} else {
if let Err(AllocErr) = empty_bytes.try_reserve_exact(MAX_CAP + 1) {
} else { panic!("isize::MAX + 1 should trigger an OOM!") }
if let Err(AllocErr) = empty_bytes.try_reserve_exact(MAX_USIZE) {
} else { panic!("usize::MAX should trigger an OOM!") }
}
}
{
let mut ten_bytes: ThinVec<u8> = thin_vec![1, 2, 3, 4, 5, 6, 7, 8, 9, 10];
if let Err(CapacityOverflow) = ten_bytes.try_reserve_exact(MAX_CAP - 10) {
panic!("isize::MAX shouldn't trigger an overflow!");
}
if let Err(CapacityOverflow) = ten_bytes.try_reserve_exact(MAX_CAP - 10) {
panic!("isize::MAX shouldn't trigger an overflow!");
}
if guards_against_isize {
if let Err(CapacityOverflow) = ten_bytes.try_reserve_exact(MAX_CAP - 9) {
} else { panic!("isize::MAX + 1 should trigger an overflow!"); }
} else {
if let Err(AllocErr) = ten_bytes.try_reserve_exact(MAX_CAP - 9) {
} else { panic!("isize::MAX + 1 should trigger an OOM!") }
}
if let Err(CapacityOverflow) = ten_bytes.try_reserve_exact(MAX_USIZE) {
} else { panic!("usize::MAX should trigger an overflow!") }
}
{
let mut ten_u32s: ThinVec<u32> = thin_vec![1, 2, 3, 4, 5, 6, 7, 8, 9, 10];
if let Err(CapacityOverflow) = ten_u32s.try_reserve_exact(MAX_CAP/4 - 10) {
panic!("isize::MAX shouldn't trigger an overflow!");
}
if let Err(CapacityOverflow) = ten_u32s.try_reserve_exact(MAX_CAP/4 - 10) {
panic!("isize::MAX shouldn't trigger an overflow!");
}
if guards_against_isize {
if let Err(CapacityOverflow) = ten_u32s.try_reserve_exact(MAX_CAP/4 - 9) {
} else { panic!("isize::MAX + 1 should trigger an overflow!"); }
} else {
if let Err(AllocErr) = ten_u32s.try_reserve_exact(MAX_CAP/4 - 9) {
} else { panic!("isize::MAX + 1 should trigger an OOM!") }
}
if let Err(CapacityOverflow) = ten_u32s.try_reserve_exact(MAX_USIZE - 20) {
} else { panic!("usize::MAX should trigger an overflow!") }
}
}
*/
#[test]
#[cfg_attr(feature = "gecko-ffi", ignore)]
fn test_header_data() {
macro_rules! assert_aligned_head_ptr {
($typename:ty) => {{
let v: ThinVec<$typename> = ThinVec::with_capacity(1 /* ensure allocation */);
let head_ptr: *mut $typename = v.data_raw();
assert_eq!(
head_ptr as usize % std::mem::align_of::<$typename>(),
0,
"expected Header::data<{}> to be aligned",
stringify!($typename)
);
}};
}
const HEADER_SIZE: usize = std::mem::size_of::<Header>();
assert_eq!(2 * std::mem::size_of::<usize>(), HEADER_SIZE);
#[repr(C, align(128))]
struct Funky<T>(T);
assert_eq!(padding::<Funky<()>>(), 128 - HEADER_SIZE);
assert_aligned_head_ptr!(Funky<()>);
assert_eq!(padding::<Funky<u8>>(), 128 - HEADER_SIZE);
assert_aligned_head_ptr!(Funky<u8>);
assert_eq!(padding::<Funky<[(); 1024]>>(), 128 - HEADER_SIZE);
assert_aligned_head_ptr!(Funky<[(); 1024]>);
assert_eq!(padding::<Funky<[*mut usize; 1024]>>(), 128 - HEADER_SIZE);
assert_aligned_head_ptr!(Funky<[*mut usize; 1024]>);
}
#[cfg(feature = "serde")]
use serde_test::{assert_tokens, Token};
#[test]
#[cfg(feature = "serde")]
fn test_ser_de_empty() {
let vec = ThinVec::<u32>::new();
assert_tokens(&vec, &[Token::Seq { len: Some(0) }, Token::SeqEnd]);
}
#[test]
#[cfg(feature = "serde")]
fn test_ser_de() {
let mut vec = ThinVec::<u32>::new();
vec.push(20);
vec.push(55);
vec.push(123);
assert_tokens(
&vec,
&[
Token::Seq { len: Some(3) },
Token::U32(20),
Token::U32(55),
Token::U32(123),
Token::SeqEnd,
],
);
}
#[test]
fn test_set_len() {
let mut vec: ThinVec<u32> = thin_vec![];
unsafe {
vec.set_len(0); // at one point this caused a crash
}
}
#[test]
#[should_panic(expected = "invalid set_len(1) on empty ThinVec")]
fn test_set_len_invalid() {
let mut vec: ThinVec<u32> = thin_vec![];
unsafe {
vec.set_len(1);
}
}
#[test]
#[should_panic(expected = "capacity overflow")]
fn test_capacity_overflow_header_too_big() {
let vec: ThinVec<u8> = ThinVec::with_capacity(isize::MAX as usize - 2);
assert!(vec.capacity() > 0);
}
#[test]
#[should_panic(expected = "capacity overflow")]
fn test_capacity_overflow_cap_too_big() {
let vec: ThinVec<u8> = ThinVec::with_capacity(isize::MAX as usize + 1);
assert!(vec.capacity() > 0);
}
#[test]
#[should_panic(expected = "capacity overflow")]
fn test_capacity_overflow_size_mul1() {
let vec: ThinVec<u16> = ThinVec::with_capacity(isize::MAX as usize + 1);
assert!(vec.capacity() > 0);
}
#[test]
#[should_panic(expected = "capacity overflow")]
fn test_capacity_overflow_size_mul2() {
let vec: ThinVec<u16> = ThinVec::with_capacity(isize::MAX as usize / 2 + 1);
assert!(vec.capacity() > 0);
}
#[test]
#[should_panic(expected = "capacity overflow")]
fn test_capacity_overflow_cap_really_isnt_isize() {
let vec: ThinVec<u8> = ThinVec::with_capacity(isize::MAX as usize);
assert!(vec.capacity() > 0);
}
}