Source code

Revision control

Copy as Markdown

Other Tools

use std::fmt;
use std::io::{self, IoSlice, IoSliceMut, Read, Write};
use std::net::Shutdown;
use std::os::fd::{AsFd, AsRawFd, BorrowedFd, FromRawFd, IntoRawFd, RawFd};
use std::os::unix::net::{self, SocketAddr};
use std::path::Path;
use crate::io_source::IoSource;
use crate::{event, sys, Interest, Registry, Token};
/// A non-blocking Unix stream socket.
pub struct UnixStream {
inner: IoSource<net::UnixStream>,
}
impl UnixStream {
/// Connects to the socket named by `path`.
///
/// This may return a `WouldBlock` in which case the socket connection
/// cannot be completed immediately. Usually it means the backlog is full.
pub fn connect<P: AsRef<Path>>(path: P) -> io::Result<UnixStream> {
let addr = SocketAddr::from_pathname(path)?;
UnixStream::connect_addr(&addr)
}
/// Connects to the socket named by `address`.
///
/// This may return a `WouldBlock` in which case the socket connection
/// cannot be completed immediately. Usually it means the backlog is full.
pub fn connect_addr(address: &SocketAddr) -> io::Result<UnixStream> {
sys::uds::stream::connect_addr(address).map(UnixStream::from_std)
}
/// Creates a new `UnixStream` from a standard `net::UnixStream`.
///
/// This function is intended to be used to wrap a Unix stream from the
/// standard library in the Mio equivalent. The conversion assumes nothing
/// about the underlying stream; it is left up to the user to set it in
/// non-blocking mode.
///
/// # Note
///
/// The Unix stream here will not have `connect` called on it, so it
/// should already be connected via some other means (be it manually, or
/// the standard library).
pub fn from_std(stream: net::UnixStream) -> UnixStream {
UnixStream {
inner: IoSource::new(stream),
}
}
/// Creates an unnamed pair of connected sockets.
///
/// Returns two `UnixStream`s which are connected to each other.
pub fn pair() -> io::Result<(UnixStream, UnixStream)> {
sys::uds::stream::pair().map(|(stream1, stream2)| {
(UnixStream::from_std(stream1), UnixStream::from_std(stream2))
})
}
/// Returns the socket address of the local half of this connection.
pub fn local_addr(&self) -> io::Result<SocketAddr> {
self.inner.local_addr()
}
/// Returns the socket address of the remote half of this connection.
pub fn peer_addr(&self) -> io::Result<SocketAddr> {
self.inner.peer_addr()
}
/// Returns the value of the `SO_ERROR` option.
pub fn take_error(&self) -> io::Result<Option<io::Error>> {
self.inner.take_error()
}
/// Shuts down the read, write, or both halves of this connection.
///
/// This function will cause all pending and future I/O calls on the
/// specified portions to immediately return with an appropriate value
/// (see the documentation of `Shutdown`).
pub fn shutdown(&self, how: Shutdown) -> io::Result<()> {
self.inner.shutdown(how)
}
/// Execute an I/O operation ensuring that the socket receives more events
/// if it hits a [`WouldBlock`] error.
///
/// # Notes
///
/// This method is required to be called for **all** I/O operations to
/// ensure the user will receive events once the socket is ready again after
/// returning a [`WouldBlock`] error.
///
/// [`WouldBlock`]: io::ErrorKind::WouldBlock
///
/// # Examples
///
/// ```
/// # use std::error::Error;
/// #
/// # fn main() -> Result<(), Box<dyn Error>> {
/// use std::io;
/// use std::os::fd::AsRawFd;
/// use mio::net::UnixStream;
///
/// let (stream1, stream2) = UnixStream::pair()?;
///
/// // Wait until the stream is writable...
///
/// // Write to the stream using a direct libc call, of course the
/// // `io::Write` implementation would be easier to use.
/// let buf = b"hello";
/// let n = stream1.try_io(|| {
/// let buf_ptr = &buf as *const _ as *const _;
/// let res = unsafe { libc::send(stream1.as_raw_fd(), buf_ptr, buf.len(), 0) };
/// if res != -1 {
/// Ok(res as usize)
/// } else {
/// // If EAGAIN or EWOULDBLOCK is set by libc::send, the closure
/// // should return `WouldBlock` error.
/// Err(io::Error::last_os_error())
/// }
/// })?;
/// eprintln!("write {} bytes", n);
///
/// // Wait until the stream is readable...
///
/// // Read from the stream using a direct libc call, of course the
/// // `io::Read` implementation would be easier to use.
/// let mut buf = [0; 512];
/// let n = stream2.try_io(|| {
/// let buf_ptr = &mut buf as *mut _ as *mut _;
/// let res = unsafe { libc::recv(stream2.as_raw_fd(), buf_ptr, buf.len(), 0) };
/// if res != -1 {
/// Ok(res as usize)
/// } else {
/// // If EAGAIN or EWOULDBLOCK is set by libc::recv, the closure
/// // should return `WouldBlock` error.
/// Err(io::Error::last_os_error())
/// }
/// })?;
/// eprintln!("read {} bytes", n);
/// # Ok(())
/// # }
/// ```
pub fn try_io<F, T>(&self, f: F) -> io::Result<T>
where
F: FnOnce() -> io::Result<T>,
{
self.inner.do_io(|_| f())
}
}
impl Read for UnixStream {
fn read(&mut self, buf: &mut [u8]) -> io::Result<usize> {
self.inner.do_io(|mut inner| inner.read(buf))
}
fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> io::Result<usize> {
self.inner.do_io(|mut inner| inner.read_vectored(bufs))
}
}
impl<'a> Read for &'a UnixStream {
fn read(&mut self, buf: &mut [u8]) -> io::Result<usize> {
self.inner.do_io(|mut inner| inner.read(buf))
}
fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> io::Result<usize> {
self.inner.do_io(|mut inner| inner.read_vectored(bufs))
}
}
impl Write for UnixStream {
fn write(&mut self, buf: &[u8]) -> io::Result<usize> {
self.inner.do_io(|mut inner| inner.write(buf))
}
fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> io::Result<usize> {
self.inner.do_io(|mut inner| inner.write_vectored(bufs))
}
fn flush(&mut self) -> io::Result<()> {
self.inner.do_io(|mut inner| inner.flush())
}
}
impl<'a> Write for &'a UnixStream {
fn write(&mut self, buf: &[u8]) -> io::Result<usize> {
self.inner.do_io(|mut inner| inner.write(buf))
}
fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> io::Result<usize> {
self.inner.do_io(|mut inner| inner.write_vectored(bufs))
}
fn flush(&mut self) -> io::Result<()> {
self.inner.do_io(|mut inner| inner.flush())
}
}
impl event::Source for UnixStream {
fn register(
&mut self,
registry: &Registry,
token: Token,
interests: Interest,
) -> io::Result<()> {
self.inner.register(registry, token, interests)
}
fn reregister(
&mut self,
registry: &Registry,
token: Token,
interests: Interest,
) -> io::Result<()> {
self.inner.reregister(registry, token, interests)
}
fn deregister(&mut self, registry: &Registry) -> io::Result<()> {
self.inner.deregister(registry)
}
}
impl fmt::Debug for UnixStream {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
self.inner.fmt(f)
}
}
impl IntoRawFd for UnixStream {
fn into_raw_fd(self) -> RawFd {
self.inner.into_inner().into_raw_fd()
}
}
impl AsRawFd for UnixStream {
fn as_raw_fd(&self) -> RawFd {
self.inner.as_raw_fd()
}
}
impl FromRawFd for UnixStream {
/// Converts a `RawFd` to a `UnixStream`.
///
/// # Notes
///
/// The caller is responsible for ensuring that the socket is in
/// non-blocking mode.
unsafe fn from_raw_fd(fd: RawFd) -> UnixStream {
UnixStream::from_std(FromRawFd::from_raw_fd(fd))
}
}
impl From<UnixStream> for net::UnixStream {
fn from(stream: UnixStream) -> Self {
// Safety: This is safe since we are extracting the raw fd from a well-constructed
// mio::net::uds::UnixStream which ensures that we actually pass in a valid file
// descriptor/socket
unsafe { net::UnixStream::from_raw_fd(stream.into_raw_fd()) }
}
}
impl AsFd for UnixStream {
fn as_fd(&self) -> BorrowedFd<'_> {
self.inner.as_fd()
}
}