Source code
Revision control
Copy as Markdown
Other Tools
// Copyright 2017 The Abseil Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// This file contains string processing functions related to
// numeric values.
#include "absl/strings/numbers.h"
#include <algorithm>
#include <cassert>
#include <cfloat> // for DBL_DIG and FLT_DIG
#include <cmath> // for HUGE_VAL
#include <cstdint>
#include <cstdio>
#include <cstdlib>
#include <cstring>
#include <iterator>
#include <limits>
#include <system_error> // NOLINT(build/c++11)
#include <utility>
#include "absl/base/attributes.h"
#include "absl/base/config.h"
#include "absl/base/internal/endian.h"
#include "absl/base/internal/raw_logging.h"
#include "absl/base/optimization.h"
#include "absl/numeric/bits.h"
#include "absl/numeric/int128.h"
#include "absl/strings/ascii.h"
#include "absl/strings/charconv.h"
#include "absl/strings/match.h"
#include "absl/strings/string_view.h"
namespace absl {
ABSL_NAMESPACE_BEGIN
bool SimpleAtof(absl::string_view str, float* out) {
*out = 0.0;
str = StripAsciiWhitespace(str);
// std::from_chars doesn't accept an initial +, but SimpleAtof does, so if one
// is present, skip it, while avoiding accepting "+-0" as valid.
if (!str.empty() && str[0] == '+') {
str.remove_prefix(1);
if (!str.empty() && str[0] == '-') {
return false;
}
}
auto result = absl::from_chars(str.data(), str.data() + str.size(), *out);
if (result.ec == std::errc::invalid_argument) {
return false;
}
if (result.ptr != str.data() + str.size()) {
// not all non-whitespace characters consumed
return false;
}
// from_chars() with DR 3081's current wording will return max() on
// overflow. SimpleAtof returns infinity instead.
if (result.ec == std::errc::result_out_of_range) {
if (*out > 1.0) {
*out = std::numeric_limits<float>::infinity();
} else if (*out < -1.0) {
*out = -std::numeric_limits<float>::infinity();
}
}
return true;
}
bool SimpleAtod(absl::string_view str, double* out) {
*out = 0.0;
str = StripAsciiWhitespace(str);
// std::from_chars doesn't accept an initial +, but SimpleAtod does, so if one
// is present, skip it, while avoiding accepting "+-0" as valid.
if (!str.empty() && str[0] == '+') {
str.remove_prefix(1);
if (!str.empty() && str[0] == '-') {
return false;
}
}
auto result = absl::from_chars(str.data(), str.data() + str.size(), *out);
if (result.ec == std::errc::invalid_argument) {
return false;
}
if (result.ptr != str.data() + str.size()) {
// not all non-whitespace characters consumed
return false;
}
// from_chars() with DR 3081's current wording will return max() on
// overflow. SimpleAtod returns infinity instead.
if (result.ec == std::errc::result_out_of_range) {
if (*out > 1.0) {
*out = std::numeric_limits<double>::infinity();
} else if (*out < -1.0) {
*out = -std::numeric_limits<double>::infinity();
}
}
return true;
}
bool SimpleAtob(absl::string_view str, bool* out) {
ABSL_RAW_CHECK(out != nullptr, "Output pointer must not be nullptr.");
if (EqualsIgnoreCase(str, "true") || EqualsIgnoreCase(str, "t") ||
EqualsIgnoreCase(str, "yes") || EqualsIgnoreCase(str, "y") ||
EqualsIgnoreCase(str, "1")) {
*out = true;
return true;
}
if (EqualsIgnoreCase(str, "false") || EqualsIgnoreCase(str, "f") ||
EqualsIgnoreCase(str, "no") || EqualsIgnoreCase(str, "n") ||
EqualsIgnoreCase(str, "0")) {
*out = false;
return true;
}
return false;
}
// ----------------------------------------------------------------------
// FastIntToBuffer() overloads
//
// Like the Fast*ToBuffer() functions above, these are intended for speed.
// Unlike the Fast*ToBuffer() functions, however, these functions write
// their output to the beginning of the buffer. The caller is responsible
// for ensuring that the buffer has enough space to hold the output.
//
// Returns a pointer to the end of the string (i.e. the null character
// terminating the string).
// ----------------------------------------------------------------------
namespace {
// Various routines to encode integers to strings.
// We split data encodings into a group of 2 digits, 4 digits, 8 digits as
// it's easier to combine powers of two into scalar arithmetic.
// Previous implementation used a lookup table of 200 bytes for every 2 bytes
// and it was memory bound, any L1 cache miss would result in a much slower
// result. When benchmarking with a cache eviction rate of several percent,
// this implementation proved to be better.
// These constants represent '00', '0000' and '00000000' as ascii strings in
// integers. We can add these numbers if we encode to bytes from 0 to 9. as
// 'i' = '0' + i for 0 <= i <= 9.
constexpr uint32_t kTwoZeroBytes = 0x0101 * '0';
constexpr uint64_t kFourZeroBytes = 0x01010101 * '0';
constexpr uint64_t kEightZeroBytes = 0x0101010101010101ull * '0';
// * 103 / 1024 is a division by 10 for values from 0 to 99. It's also a
// division of a structure [k takes 2 bytes][m takes 2 bytes], then * 103 / 1024
// will be [k / 10][m / 10]. It allows parallel division.
constexpr uint64_t kDivisionBy10Mul = 103u;
constexpr uint64_t kDivisionBy10Div = 1 << 10;
// * 10486 / 1048576 is a division by 100 for values from 0 to 9999.
constexpr uint64_t kDivisionBy100Mul = 10486u;
constexpr uint64_t kDivisionBy100Div = 1 << 20;
// Encode functions write the ASCII output of input `n` to `out_str`.
inline char* EncodeHundred(uint32_t n, char* out_str) {
int num_digits = static_cast<int>(n - 10) >> 8;
uint32_t div10 = (n * kDivisionBy10Mul) / kDivisionBy10Div;
uint32_t mod10 = n - 10u * div10;
uint32_t base = kTwoZeroBytes + div10 + (mod10 << 8);
base >>= num_digits & 8;
little_endian::Store16(out_str, static_cast<uint16_t>(base));
return out_str + 2 + num_digits;
}
inline char* EncodeTenThousand(uint32_t n, char* out_str) {
// We split lower 2 digits and upper 2 digits of n into 2 byte consecutive
// blocks. 123 -> [\0\1][\0\23]. We divide by 10 both blocks
// (it's 1 division + zeroing upper bits), and compute modulo 10 as well "in
// parallel". Then we combine both results to have both ASCII digits,
// strip trailing zeros, add ASCII '0000' and return.
uint32_t div100 = (n * kDivisionBy100Mul) / kDivisionBy100Div;
uint32_t mod100 = n - 100ull * div100;
uint32_t hundreds = (mod100 << 16) + div100;
uint32_t tens = (hundreds * kDivisionBy10Mul) / kDivisionBy10Div;
tens &= (0xFull << 16) | 0xFull;
tens += (hundreds - 10ull * tens) << 8;
ABSL_ASSUME(tens != 0);
// The result can contain trailing zero bits, we need to strip them to a first
// significant byte in a final representation. For example, for n = 123, we
// have tens to have representation \0\1\2\3. We do `& -8` to round
// to a multiple to 8 to strip zero bytes, not all zero bits.
// countr_zero to help.
// 0 minus 8 to make MSVC happy.
uint32_t zeroes = static_cast<uint32_t>(absl::countr_zero(tens)) & (0 - 8u);
tens += kFourZeroBytes;
tens >>= zeroes;
little_endian::Store32(out_str, tens);
return out_str + sizeof(tens) - zeroes / 8;
}
// Helper function to produce an ASCII representation of `i`.
//
// Function returns an 8-byte integer which when summed with `kEightZeroBytes`,
// can be treated as a printable buffer with ascii representation of `i`,
// possibly with leading zeros.
//
// Example:
//
// uint64_t buffer = PrepareEightDigits(102030) + kEightZeroBytes;
// char* ascii = reinterpret_cast<char*>(&buffer);
// // Note two leading zeros:
// EXPECT_EQ(absl::string_view(ascii, 8), "00102030");
//
// Pre-condition: `i` must be less than 100000000.
inline uint64_t PrepareEightDigits(uint32_t i) {
ABSL_ASSUME(i < 10000'0000);
// Prepare 2 blocks of 4 digits "in parallel".
uint32_t hi = i / 10000;
uint32_t lo = i % 10000;
uint64_t merged = hi | (uint64_t{lo} << 32);
uint64_t div100 = ((merged * kDivisionBy100Mul) / kDivisionBy100Div) &
((0x7Full << 32) | 0x7Full);
uint64_t mod100 = merged - 100ull * div100;
uint64_t hundreds = (mod100 << 16) + div100;
uint64_t tens = (hundreds * kDivisionBy10Mul) / kDivisionBy10Div;
tens &= (0xFull << 48) | (0xFull << 32) | (0xFull << 16) | 0xFull;
tens += (hundreds - 10ull * tens) << 8;
return tens;
}
inline ABSL_ATTRIBUTE_ALWAYS_INLINE char* EncodeFullU32(uint32_t n,
char* out_str) {
if (n < 10) {
*out_str = static_cast<char>('0' + n);
return out_str + 1;
}
if (n < 100'000'000) {
uint64_t bottom = PrepareEightDigits(n);
ABSL_ASSUME(bottom != 0);
// 0 minus 8 to make MSVC happy.
uint32_t zeroes =
static_cast<uint32_t>(absl::countr_zero(bottom)) & (0 - 8u);
little_endian::Store64(out_str, (bottom + kEightZeroBytes) >> zeroes);
return out_str + sizeof(bottom) - zeroes / 8;
}
uint32_t div08 = n / 100'000'000;
uint32_t mod08 = n % 100'000'000;
uint64_t bottom = PrepareEightDigits(mod08) + kEightZeroBytes;
out_str = EncodeHundred(div08, out_str);
little_endian::Store64(out_str, bottom);
return out_str + sizeof(bottom);
}
inline ABSL_ATTRIBUTE_ALWAYS_INLINE char* EncodeFullU64(uint64_t i,
char* buffer) {
if (i <= std::numeric_limits<uint32_t>::max()) {
return EncodeFullU32(static_cast<uint32_t>(i), buffer);
}
uint32_t mod08;
if (i < 1'0000'0000'0000'0000ull) {
uint32_t div08 = static_cast<uint32_t>(i / 100'000'000ull);
mod08 = static_cast<uint32_t>(i % 100'000'000ull);
buffer = EncodeFullU32(div08, buffer);
} else {
uint64_t div08 = i / 100'000'000ull;
mod08 = static_cast<uint32_t>(i % 100'000'000ull);
uint32_t div016 = static_cast<uint32_t>(div08 / 100'000'000ull);
uint32_t div08mod08 = static_cast<uint32_t>(div08 % 100'000'000ull);
uint64_t mid_result = PrepareEightDigits(div08mod08) + kEightZeroBytes;
buffer = EncodeTenThousand(div016, buffer);
little_endian::Store64(buffer, mid_result);
buffer += sizeof(mid_result);
}
uint64_t mod_result = PrepareEightDigits(mod08) + kEightZeroBytes;
little_endian::Store64(buffer, mod_result);
return buffer + sizeof(mod_result);
}
} // namespace
void numbers_internal::PutTwoDigits(uint32_t i, char* buf) {
assert(i < 100);
uint32_t base = kTwoZeroBytes;
uint32_t div10 = (i * kDivisionBy10Mul) / kDivisionBy10Div;
uint32_t mod10 = i - 10u * div10;
base += div10 + (mod10 << 8);
little_endian::Store16(buf, static_cast<uint16_t>(base));
}
char* numbers_internal::FastIntToBuffer(uint32_t n, char* out_str) {
out_str = EncodeFullU32(n, out_str);
*out_str = '\0';
return out_str;
}
char* numbers_internal::FastIntToBuffer(int32_t i, char* buffer) {
uint32_t u = static_cast<uint32_t>(i);
if (i < 0) {
*buffer++ = '-';
// We need to do the negation in modular (i.e., "unsigned")
// arithmetic; MSVC++ apparently warns for plain "-u", so
// we write the equivalent expression "0 - u" instead.
u = 0 - u;
}
buffer = EncodeFullU32(u, buffer);
*buffer = '\0';
return buffer;
}
char* numbers_internal::FastIntToBuffer(uint64_t i, char* buffer) {
buffer = EncodeFullU64(i, buffer);
*buffer = '\0';
return buffer;
}
char* numbers_internal::FastIntToBuffer(int64_t i, char* buffer) {
uint64_t u = static_cast<uint64_t>(i);
if (i < 0) {
*buffer++ = '-';
// We need to do the negation in modular (i.e., "unsigned")
// arithmetic; MSVC++ apparently warns for plain "-u", so
// we write the equivalent expression "0 - u" instead.
u = 0 - u;
}
buffer = EncodeFullU64(u, buffer);
*buffer = '\0';
return buffer;
}
// Given a 128-bit number expressed as a pair of uint64_t, high half first,
// return that number multiplied by the given 32-bit value. If the result is
// too large to fit in a 128-bit number, divide it by 2 until it fits.
static std::pair<uint64_t, uint64_t> Mul32(std::pair<uint64_t, uint64_t> num,
uint32_t mul) {
uint64_t bits0_31 = num.second & 0xFFFFFFFF;
uint64_t bits32_63 = num.second >> 32;
uint64_t bits64_95 = num.first & 0xFFFFFFFF;
uint64_t bits96_127 = num.first >> 32;
// The picture so far: each of these 64-bit values has only the lower 32 bits
// filled in.
// bits96_127: [ 00000000 xxxxxxxx ]
// bits64_95: [ 00000000 xxxxxxxx ]
// bits32_63: [ 00000000 xxxxxxxx ]
// bits0_31: [ 00000000 xxxxxxxx ]
bits0_31 *= mul;
bits32_63 *= mul;
bits64_95 *= mul;
bits96_127 *= mul;
// Now the top halves may also have value, though all 64 of their bits will
// never be set at the same time, since they are a result of a 32x32 bit
// multiply. This makes the carry calculation slightly easier.
// bits96_127: [ mmmmmmmm | mmmmmmmm ]
// bits64_95: [ | mmmmmmmm mmmmmmmm | ]
// bits32_63: | [ mmmmmmmm | mmmmmmmm ]
// bits0_31: | [ | mmmmmmmm mmmmmmmm ]
// eventually: [ bits128_up | ...bits64_127.... | ..bits0_63... ]
uint64_t bits0_63 = bits0_31 + (bits32_63 << 32);
uint64_t bits64_127 = bits64_95 + (bits96_127 << 32) + (bits32_63 >> 32) +
(bits0_63 < bits0_31);
uint64_t bits128_up = (bits96_127 >> 32) + (bits64_127 < bits64_95);
if (bits128_up == 0) return {bits64_127, bits0_63};
auto shift = static_cast<unsigned>(bit_width(bits128_up));
uint64_t lo = (bits0_63 >> shift) + (bits64_127 << (64 - shift));
uint64_t hi = (bits64_127 >> shift) + (bits128_up << (64 - shift));
return {hi, lo};
}
// Compute num * 5 ^ expfive, and return the first 128 bits of the result,
// where the first bit is always a one. So PowFive(1, 0) starts 0b100000,
// PowFive(1, 1) starts 0b101000, PowFive(1, 2) starts 0b110010, etc.
static std::pair<uint64_t, uint64_t> PowFive(uint64_t num, int expfive) {
std::pair<uint64_t, uint64_t> result = {num, 0};
while (expfive >= 13) {
// 5^13 is the highest power of five that will fit in a 32-bit integer.
result = Mul32(result, 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5);
expfive -= 13;
}
constexpr uint32_t powers_of_five[13] = {
1,
5,
5 * 5,
5 * 5 * 5,
5 * 5 * 5 * 5,
5 * 5 * 5 * 5 * 5,
5 * 5 * 5 * 5 * 5 * 5,
5 * 5 * 5 * 5 * 5 * 5 * 5,
5 * 5 * 5 * 5 * 5 * 5 * 5 * 5,
5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5,
5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5,
5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5,
5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5 * 5};
result = Mul32(result, powers_of_five[expfive & 15]);
int shift = countl_zero(result.first);
if (shift != 0) {
result.first = (result.first << shift) + (result.second >> (64 - shift));
result.second = (result.second << shift);
}
return result;
}
struct ExpDigits {
int32_t exponent;
char digits[6];
};
// SplitToSix converts value, a positive double-precision floating-point number,
// into a base-10 exponent and 6 ASCII digits, where the first digit is never
// zero. For example, SplitToSix(1) returns an exponent of zero and a digits
// array of {'1', '0', '0', '0', '0', '0'}. If value is exactly halfway between
// two possible representations, e.g. value = 100000.5, then "round to even" is
// performed.
static ExpDigits SplitToSix(const double value) {
ExpDigits exp_dig;
int exp = 5;
double d = value;
// First step: calculate a close approximation of the output, where the
// value d will be between 100,000 and 999,999, representing the digits
// in the output ASCII array, and exp is the base-10 exponent. It would be
// faster to use a table here, and to look up the base-2 exponent of value,
// however value is an IEEE-754 64-bit number, so the table would have 2,000
// entries, which is not cache-friendly.
if (d >= 999999.5) {
if (d >= 1e+261) exp += 256, d *= 1e-256;
if (d >= 1e+133) exp += 128, d *= 1e-128;
if (d >= 1e+69) exp += 64, d *= 1e-64;
if (d >= 1e+37) exp += 32, d *= 1e-32;
if (d >= 1e+21) exp += 16, d *= 1e-16;
if (d >= 1e+13) exp += 8, d *= 1e-8;
if (d >= 1e+9) exp += 4, d *= 1e-4;
if (d >= 1e+7) exp += 2, d *= 1e-2;
if (d >= 1e+6) exp += 1, d *= 1e-1;
} else {
if (d < 1e-250) exp -= 256, d *= 1e256;
if (d < 1e-122) exp -= 128, d *= 1e128;
if (d < 1e-58) exp -= 64, d *= 1e64;
if (d < 1e-26) exp -= 32, d *= 1e32;
if (d < 1e-10) exp -= 16, d *= 1e16;
if (d < 1e-2) exp -= 8, d *= 1e8;
if (d < 1e+2) exp -= 4, d *= 1e4;
if (d < 1e+4) exp -= 2, d *= 1e2;
if (d < 1e+5) exp -= 1, d *= 1e1;
}
// At this point, d is in the range [99999.5..999999.5) and exp is in the
// range [-324..308]. Since we need to round d up, we want to add a half
// and truncate.
// However, the technique above may have lost some precision, due to its
// repeated multiplication by constants that each may be off by half a bit
// of precision. This only matters if we're close to the edge though.
// Since we'd like to know if the fractional part of d is close to a half,
// we multiply it by 65536 and see if the fractional part is close to 32768.
// (The number doesn't have to be a power of two,but powers of two are faster)
uint64_t d64k = d * 65536;
uint32_t dddddd; // A 6-digit decimal integer.
if ((d64k % 65536) == 32767 || (d64k % 65536) == 32768) {
// OK, it's fairly likely that precision was lost above, which is
// not a surprise given only 52 mantissa bits are available. Therefore
// redo the calculation using 128-bit numbers. (64 bits are not enough).
// Start out with digits rounded down; maybe add one below.
dddddd = static_cast<uint32_t>(d64k / 65536);
// mantissa is a 64-bit integer representing M.mmm... * 2^63. The actual
// value we're representing, of course, is M.mmm... * 2^exp2.
int exp2;
double m = std::frexp(value, &exp2);
uint64_t mantissa = m * (32768.0 * 65536.0 * 65536.0 * 65536.0);
// std::frexp returns an m value in the range [0.5, 1.0), however we
// can't multiply it by 2^64 and convert to an integer because some FPUs
// throw an exception when converting an number higher than 2^63 into an
// integer - even an unsigned 64-bit integer! Fortunately it doesn't matter
// since m only has 52 significant bits anyway.
mantissa <<= 1;
exp2 -= 64; // not needed, but nice for debugging
// OK, we are here to compare:
// (dddddd + 0.5) * 10^(exp-5) vs. mantissa * 2^exp2
// so we can round up dddddd if appropriate. Those values span the full
// range of 600 orders of magnitude of IEE 64-bit floating-point.
// Fortunately, we already know they are very close, so we don't need to
// track the base-2 exponent of both sides. This greatly simplifies the
// the math since the 2^exp2 calculation is unnecessary and the power-of-10
// calculation can become a power-of-5 instead.
std::pair<uint64_t, uint64_t> edge, val;
if (exp >= 6) {
// Compare (dddddd + 0.5) * 5 ^ (exp - 5) to mantissa
// Since we're tossing powers of two, 2 * dddddd + 1 is the
// same as dddddd + 0.5
edge = PowFive(2 * dddddd + 1, exp - 5);
val.first = mantissa;
val.second = 0;
} else {
// We can't compare (dddddd + 0.5) * 5 ^ (exp - 5) to mantissa as we did
// above because (exp - 5) is negative. So we compare (dddddd + 0.5) to
// mantissa * 5 ^ (5 - exp)
edge = PowFive(2 * dddddd + 1, 0);
val = PowFive(mantissa, 5 - exp);
}
// printf("exp=%d %016lx %016lx vs %016lx %016lx\n", exp, val.first,
// val.second, edge.first, edge.second);
if (val > edge) {
dddddd++;
} else if (val == edge) {
dddddd += (dddddd & 1);
}
} else {
// Here, we are not close to the edge.
dddddd = static_cast<uint32_t>((d64k + 32768) / 65536);
}
if (dddddd == 1000000) {
dddddd = 100000;
exp += 1;
}
exp_dig.exponent = exp;
uint32_t two_digits = dddddd / 10000;
dddddd -= two_digits * 10000;
numbers_internal::PutTwoDigits(two_digits, &exp_dig.digits[0]);
two_digits = dddddd / 100;
dddddd -= two_digits * 100;
numbers_internal::PutTwoDigits(two_digits, &exp_dig.digits[2]);
numbers_internal::PutTwoDigits(dddddd, &exp_dig.digits[4]);
return exp_dig;
}
// Helper function for fast formatting of floating-point.
// The result is the same as "%g", a.k.a. "%.6g".
size_t numbers_internal::SixDigitsToBuffer(double d, char* const buffer) {
static_assert(std::numeric_limits<float>::is_iec559,
"IEEE-754/IEC-559 support only");
char* out = buffer; // we write data to out, incrementing as we go, but
// FloatToBuffer always returns the address of the buffer
// passed in.
if (std::isnan(d)) {
strcpy(out, "nan"); // NOLINT(runtime/printf)
return 3;
}
if (d == 0) { // +0 and -0 are handled here
if (std::signbit(d)) *out++ = '-';
*out++ = '0';
*out = 0;
return static_cast<size_t>(out - buffer);
}
if (d < 0) {
*out++ = '-';
d = -d;
}
if (d > std::numeric_limits<double>::max()) {
strcpy(out, "inf"); // NOLINT(runtime/printf)
return static_cast<size_t>(out + 3 - buffer);
}
auto exp_dig = SplitToSix(d);
int exp = exp_dig.exponent;
const char* digits = exp_dig.digits;
out[0] = '0';
out[1] = '.';
switch (exp) {
case 5:
memcpy(out, &digits[0], 6), out += 6;
*out = 0;
return static_cast<size_t>(out - buffer);
case 4:
memcpy(out, &digits[0], 5), out += 5;
if (digits[5] != '0') {
*out++ = '.';
*out++ = digits[5];
}
*out = 0;
return static_cast<size_t>(out - buffer);
case 3:
memcpy(out, &digits[0], 4), out += 4;
if ((digits[5] | digits[4]) != '0') {
*out++ = '.';
*out++ = digits[4];
if (digits[5] != '0') *out++ = digits[5];
}
*out = 0;
return static_cast<size_t>(out - buffer);
case 2:
memcpy(out, &digits[0], 3), out += 3;
*out++ = '.';
memcpy(out, &digits[3], 3);
out += 3;
while (out[-1] == '0') --out;
if (out[-1] == '.') --out;
*out = 0;
return static_cast<size_t>(out - buffer);
case 1:
memcpy(out, &digits[0], 2), out += 2;
*out++ = '.';
memcpy(out, &digits[2], 4);
out += 4;
while (out[-1] == '0') --out;
if (out[-1] == '.') --out;
*out = 0;
return static_cast<size_t>(out - buffer);
case 0:
memcpy(out, &digits[0], 1), out += 1;
*out++ = '.';
memcpy(out, &digits[1], 5);
out += 5;
while (out[-1] == '0') --out;
if (out[-1] == '.') --out;
*out = 0;
return static_cast<size_t>(out - buffer);
case -4:
out[2] = '0';
++out;
ABSL_FALLTHROUGH_INTENDED;
case -3:
out[2] = '0';
++out;
ABSL_FALLTHROUGH_INTENDED;
case -2:
out[2] = '0';
++out;
ABSL_FALLTHROUGH_INTENDED;
case -1:
out += 2;
memcpy(out, &digits[0], 6);
out += 6;
while (out[-1] == '0') --out;
*out = 0;
return static_cast<size_t>(out - buffer);
}
assert(exp < -4 || exp >= 6);
out[0] = digits[0];
assert(out[1] == '.');
out += 2;
memcpy(out, &digits[1], 5), out += 5;
while (out[-1] == '0') --out;
if (out[-1] == '.') --out;
*out++ = 'e';
if (exp > 0) {
*out++ = '+';
} else {
*out++ = '-';
exp = -exp;
}
if (exp > 99) {
int dig1 = exp / 100;
exp -= dig1 * 100;
*out++ = '0' + static_cast<char>(dig1);
}
PutTwoDigits(static_cast<uint32_t>(exp), out);
out += 2;
*out = 0;
return static_cast<size_t>(out - buffer);
}
namespace {
// Represents integer values of digits.
// Uses 36 to indicate an invalid character since we support
// bases up to 36.
static const int8_t kAsciiToInt[256] = {
36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, // 16 36s.
36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 0, 1, 2, 3, 4, 5,
6, 7, 8, 9, 36, 36, 36, 36, 36, 36, 36, 10, 11, 12, 13, 14, 15, 16, 17,
18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36,
36, 36, 36, 36, 36, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 36, 36, 36, 36, 36, 36,
36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36,
36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36};
// Parse the sign and optional hex or oct prefix in text.
inline bool safe_parse_sign_and_base(absl::string_view* text /*inout*/,
int* base_ptr /*inout*/,
bool* negative_ptr /*output*/) {
if (text->data() == nullptr) {
return false;
}
const char* start = text->data();
const char* end = start + text->size();
int base = *base_ptr;
// Consume whitespace.
while (start < end &&
absl::ascii_isspace(static_cast<unsigned char>(start[0]))) {
++start;
}
while (start < end &&
absl::ascii_isspace(static_cast<unsigned char>(end[-1]))) {
--end;
}
if (start >= end) {
return false;
}
// Consume sign.
*negative_ptr = (start[0] == '-');
if (*negative_ptr || start[0] == '+') {
++start;
if (start >= end) {
return false;
}
}
// Consume base-dependent prefix.
// base 0: "0x" -> base 16, "0" -> base 8, default -> base 10
// base 16: "0x" -> base 16
// Also validate the base.
if (base == 0) {
if (end - start >= 2 && start[0] == '0' &&
(start[1] == 'x' || start[1] == 'X')) {
base = 16;
start += 2;
if (start >= end) {
// "0x" with no digits after is invalid.
return false;
}
} else if (end - start >= 1 && start[0] == '0') {
base = 8;
start += 1;
} else {
base = 10;
}
} else if (base == 16) {
if (end - start >= 2 && start[0] == '0' &&
(start[1] == 'x' || start[1] == 'X')) {
start += 2;
if (start >= end) {
// "0x" with no digits after is invalid.
return false;
}
}
} else if (base >= 2 && base <= 36) {
// okay
} else {
return false;
}
*text = absl::string_view(start, static_cast<size_t>(end - start));
*base_ptr = base;
return true;
}
// Consume digits.
//
// The classic loop:
//
// for each digit
// value = value * base + digit
// value *= sign
//
// The classic loop needs overflow checking. It also fails on the most
// negative integer, -2147483648 in 32-bit two's complement representation.
//
// My improved loop:
//
// if (!negative)
// for each digit
// value = value * base
// value = value + digit
// else
// for each digit
// value = value * base
// value = value - digit
//
// Overflow checking becomes simple.
// Lookup tables per IntType:
// vmax/base and vmin/base are precomputed because division costs at least 8ns.
// TODO(junyer): Doing this per base instead (i.e. an array of structs, not a
// struct of arrays) would probably be better in terms of d-cache for the most
// commonly used bases.
template <typename IntType>
struct LookupTables {
ABSL_CONST_INIT static const IntType kVmaxOverBase[];
ABSL_CONST_INIT static const IntType kVminOverBase[];
};
// An array initializer macro for X/base where base in [0, 36].
// However, note that lookups for base in [0, 1] should never happen because
// base has been validated to be in [2, 36] by safe_parse_sign_and_base().
#define X_OVER_BASE_INITIALIZER(X) \
{ \
0, 0, X / 2, X / 3, X / 4, X / 5, X / 6, X / 7, X / 8, X / 9, X / 10, \
X / 11, X / 12, X / 13, X / 14, X / 15, X / 16, X / 17, X / 18, \
X / 19, X / 20, X / 21, X / 22, X / 23, X / 24, X / 25, X / 26, \
X / 27, X / 28, X / 29, X / 30, X / 31, X / 32, X / 33, X / 34, \
X / 35, X / 36, \
}
// This kVmaxOverBase is generated with
// for (int base = 2; base < 37; ++base) {
// absl::uint128 max = std::numeric_limits<absl::uint128>::max();
// auto result = max / base;
// std::cout << " MakeUint128(" << absl::Uint128High64(result) << "u, "
// << absl::Uint128Low64(result) << "u),\n";
// }
//
// uint128& operator/=(uint128) is not constexpr, so hardcode the resulting
// array to avoid a static initializer.
template <>
ABSL_CONST_INIT const uint128 LookupTables<uint128>::kVmaxOverBase[] = {
0,
0,
MakeUint128(9223372036854775807u, 18446744073709551615u),
MakeUint128(6148914691236517205u, 6148914691236517205u),
MakeUint128(4611686018427387903u, 18446744073709551615u),
MakeUint128(3689348814741910323u, 3689348814741910323u),
MakeUint128(3074457345618258602u, 12297829382473034410u),
MakeUint128(2635249153387078802u, 5270498306774157604u),
MakeUint128(2305843009213693951u, 18446744073709551615u),
MakeUint128(2049638230412172401u, 14347467612885206812u),
MakeUint128(1844674407370955161u, 11068046444225730969u),
MakeUint128(1676976733973595601u, 8384883669867978007u),
MakeUint128(1537228672809129301u, 6148914691236517205u),
MakeUint128(1418980313362273201u, 4256940940086819603u),
MakeUint128(1317624576693539401u, 2635249153387078802u),
MakeUint128(1229782938247303441u, 1229782938247303441u),
MakeUint128(1152921504606846975u, 18446744073709551615u),
MakeUint128(1085102592571150095u, 1085102592571150095u),
MakeUint128(1024819115206086200u, 16397105843297379214u),
MakeUint128(970881267037344821u, 16504981539634861972u),
MakeUint128(922337203685477580u, 14757395258967641292u),
MakeUint128(878416384462359600u, 14054662151397753612u),
MakeUint128(838488366986797800u, 13415813871788764811u),
MakeUint128(802032351030850070u, 4812194106185100421u),
MakeUint128(768614336404564650u, 12297829382473034410u),
MakeUint128(737869762948382064u, 11805916207174113034u),
MakeUint128(709490156681136600u, 11351842506898185609u),
MakeUint128(683212743470724133u, 17080318586768103348u),
MakeUint128(658812288346769700u, 10540996613548315209u),
MakeUint128(636094623231363848u, 15266270957552732371u),
MakeUint128(614891469123651720u, 9838263505978427528u),
MakeUint128(595056260442243600u, 9520900167075897608u),
MakeUint128(576460752303423487u, 18446744073709551615u),
MakeUint128(558992244657865200u, 8943875914525843207u),
MakeUint128(542551296285575047u, 9765923333140350855u),
MakeUint128(527049830677415760u, 8432797290838652167u),
MakeUint128(512409557603043100u, 8198552921648689607u),
};
// This kVmaxOverBase generated with
// for (int base = 2; base < 37; ++base) {
// absl::int128 max = std::numeric_limits<absl::int128>::max();
// auto result = max / base;
// std::cout << "\tMakeInt128(" << absl::Int128High64(result) << ", "
// << absl::Int128Low64(result) << "u),\n";
// }
//
// int128& operator/=(int128) is not constexpr, so hardcode the resulting array
// to avoid a static initializer.
template <>
ABSL_CONST_INIT const int128 LookupTables<int128>::kVmaxOverBase[] = {
0,
0,
MakeInt128(4611686018427387903, 18446744073709551615u),
MakeInt128(3074457345618258602, 12297829382473034410u),
MakeInt128(2305843009213693951, 18446744073709551615u),
MakeInt128(1844674407370955161, 11068046444225730969u),
MakeInt128(1537228672809129301, 6148914691236517205u),
MakeInt128(1317624576693539401, 2635249153387078802u),
MakeInt128(1152921504606846975, 18446744073709551615u),
MakeInt128(1024819115206086200, 16397105843297379214u),
MakeInt128(922337203685477580, 14757395258967641292u),
MakeInt128(838488366986797800, 13415813871788764811u),
MakeInt128(768614336404564650, 12297829382473034410u),
MakeInt128(709490156681136600, 11351842506898185609u),
MakeInt128(658812288346769700, 10540996613548315209u),
MakeInt128(614891469123651720, 9838263505978427528u),
MakeInt128(576460752303423487, 18446744073709551615u),
MakeInt128(542551296285575047, 9765923333140350855u),
MakeInt128(512409557603043100, 8198552921648689607u),
MakeInt128(485440633518672410, 17475862806672206794u),
MakeInt128(461168601842738790, 7378697629483820646u),
MakeInt128(439208192231179800, 7027331075698876806u),
MakeInt128(419244183493398900, 6707906935894382405u),
MakeInt128(401016175515425035, 2406097053092550210u),
MakeInt128(384307168202282325, 6148914691236517205u),
MakeInt128(368934881474191032, 5902958103587056517u),
MakeInt128(354745078340568300, 5675921253449092804u),
MakeInt128(341606371735362066, 17763531330238827482u),
MakeInt128(329406144173384850, 5270498306774157604u),
MakeInt128(318047311615681924, 7633135478776366185u),
MakeInt128(307445734561825860, 4919131752989213764u),
MakeInt128(297528130221121800, 4760450083537948804u),
MakeInt128(288230376151711743, 18446744073709551615u),
MakeInt128(279496122328932600, 4471937957262921603u),
MakeInt128(271275648142787523, 14106333703424951235u),
MakeInt128(263524915338707880, 4216398645419326083u),
MakeInt128(256204778801521550, 4099276460824344803u),
};
// This kVminOverBase generated with
// for (int base = 2; base < 37; ++base) {
// absl::int128 min = std::numeric_limits<absl::int128>::min();
// auto result = min / base;
// std::cout << "\tMakeInt128(" << absl::Int128High64(result) << ", "
// << absl::Int128Low64(result) << "u),\n";
// }
//
//
// int128& operator/=(int128) is not constexpr, so hardcode the resulting array
// to avoid a static initializer.
template <>
ABSL_CONST_INIT const int128 LookupTables<int128>::kVminOverBase[] = {
0,
0,
MakeInt128(-4611686018427387904, 0u),
MakeInt128(-3074457345618258603, 6148914691236517206u),
MakeInt128(-2305843009213693952, 0u),
MakeInt128(-1844674407370955162, 7378697629483820647u),
MakeInt128(-1537228672809129302, 12297829382473034411u),
MakeInt128(-1317624576693539402, 15811494920322472814u),
MakeInt128(-1152921504606846976, 0u),
MakeInt128(-1024819115206086201, 2049638230412172402u),
MakeInt128(-922337203685477581, 3689348814741910324u),
MakeInt128(-838488366986797801, 5030930201920786805u),
MakeInt128(-768614336404564651, 6148914691236517206u),
MakeInt128(-709490156681136601, 7094901566811366007u),
MakeInt128(-658812288346769701, 7905747460161236407u),
MakeInt128(-614891469123651721, 8608480567731124088u),
MakeInt128(-576460752303423488, 0u),
MakeInt128(-542551296285575048, 8680820740569200761u),
MakeInt128(-512409557603043101, 10248191152060862009u),
MakeInt128(-485440633518672411, 970881267037344822u),
MakeInt128(-461168601842738791, 11068046444225730970u),
MakeInt128(-439208192231179801, 11419412998010674810u),
MakeInt128(-419244183493398901, 11738837137815169211u),
MakeInt128(-401016175515425036, 16040647020617001406u),
MakeInt128(-384307168202282326, 12297829382473034411u),
MakeInt128(-368934881474191033, 12543785970122495099u),
MakeInt128(-354745078340568301, 12770822820260458812u),
MakeInt128(-341606371735362067, 683212743470724134u),
MakeInt128(-329406144173384851, 13176245766935394012u),
MakeInt128(-318047311615681925, 10813608594933185431u),
MakeInt128(-307445734561825861, 13527612320720337852u),
MakeInt128(-297528130221121801, 13686293990171602812u),
MakeInt128(-288230376151711744, 0u),
MakeInt128(-279496122328932601, 13974806116446630013u),
MakeInt128(-271275648142787524, 4340410370284600381u),
MakeInt128(-263524915338707881, 14230345428290225533u),
MakeInt128(-256204778801521551, 14347467612885206813u),
};
template <typename IntType>
ABSL_CONST_INIT const IntType LookupTables<IntType>::kVmaxOverBase[] =
X_OVER_BASE_INITIALIZER(std::numeric_limits<IntType>::max());
template <typename IntType>
ABSL_CONST_INIT const IntType LookupTables<IntType>::kVminOverBase[] =
X_OVER_BASE_INITIALIZER(std::numeric_limits<IntType>::min());
#undef X_OVER_BASE_INITIALIZER
template <typename IntType>
inline bool safe_parse_positive_int(absl::string_view text, int base,
IntType* value_p) {
IntType value = 0;
const IntType vmax = std::numeric_limits<IntType>::max();
assert(vmax > 0);
assert(base >= 0);
const IntType base_inttype = static_cast<IntType>(base);
assert(vmax >= base_inttype);
const IntType vmax_over_base = LookupTables<IntType>::kVmaxOverBase[base];
assert(base < 2 ||
std::numeric_limits<IntType>::max() / base_inttype == vmax_over_base);
const char* start = text.data();
const char* end = start + text.size();
// loop over digits
for (; start < end; ++start) {
unsigned char c = static_cast<unsigned char>(start[0]);
IntType digit = static_cast<IntType>(kAsciiToInt[c]);
if (digit >= base_inttype) {
*value_p = value;
return false;
}
if (value > vmax_over_base) {
*value_p = vmax;
return false;
}
value *= base_inttype;
if (value > vmax - digit) {
*value_p = vmax;
return false;
}
value += digit;
}
*value_p = value;
return true;
}
template <typename IntType>
inline bool safe_parse_negative_int(absl::string_view text, int base,
IntType* value_p) {
IntType value = 0;
const IntType vmin = std::numeric_limits<IntType>::min();
assert(vmin < 0);
assert(vmin <= 0 - base);
IntType vmin_over_base = LookupTables<IntType>::kVminOverBase[base];
assert(base < 2 ||
std::numeric_limits<IntType>::min() / base == vmin_over_base);
// 2003 c++ standard [expr.mul]
// "... the sign of the remainder is implementation-defined."
// Although (vmin/base)*base + vmin%base is always vmin.
// 2011 c++ standard tightens the spec but we cannot rely on it.
// TODO(junyer): Handle this in the lookup table generation.
if (vmin % base > 0) {
vmin_over_base += 1;
}
const char* start = text.data();
const char* end = start + text.size();
// loop over digits
for (; start < end; ++start) {
unsigned char c = static_cast<unsigned char>(start[0]);
int digit = kAsciiToInt[c];
if (digit >= base) {
*value_p = value;
return false;
}
if (value < vmin_over_base) {
*value_p = vmin;
return false;
}
value *= base;
if (value < vmin + digit) {
*value_p = vmin;
return false;
}
value -= digit;
}
*value_p = value;
return true;
}
// Input format based on POSIX.1-2008 strtol
template <typename IntType>
inline bool safe_int_internal(absl::string_view text, IntType* value_p,
int base) {
*value_p = 0;
bool negative;
if (!safe_parse_sign_and_base(&text, &base, &negative)) {
return false;
}
if (!negative) {
return safe_parse_positive_int(text, base, value_p);
} else {
return safe_parse_negative_int(text, base, value_p);
}
}
template <typename IntType>
inline bool safe_uint_internal(absl::string_view text, IntType* value_p,
int base) {
*value_p = 0;
bool negative;
if (!safe_parse_sign_and_base(&text, &base, &negative) || negative) {
return false;
}
return safe_parse_positive_int(text, base, value_p);
}
} // anonymous namespace
namespace numbers_internal {
// Digit conversion.
ABSL_CONST_INIT ABSL_DLL const char kHexChar[] =
"0123456789abcdef";
ABSL_CONST_INIT ABSL_DLL const char kHexTable[513] =
"000102030405060708090a0b0c0d0e0f"
"101112131415161718191a1b1c1d1e1f"
"202122232425262728292a2b2c2d2e2f"
"303132333435363738393a3b3c3d3e3f"
"404142434445464748494a4b4c4d4e4f"
"505152535455565758595a5b5c5d5e5f"
"606162636465666768696a6b6c6d6e6f"
"707172737475767778797a7b7c7d7e7f"
"808182838485868788898a8b8c8d8e8f"
"909192939495969798999a9b9c9d9e9f"
"a0a1a2a3a4a5a6a7a8a9aaabacadaeaf"
"b0b1b2b3b4b5b6b7b8b9babbbcbdbebf"
"c0c1c2c3c4c5c6c7c8c9cacbcccdcecf"
"d0d1d2d3d4d5d6d7d8d9dadbdcdddedf"
"e0e1e2e3e4e5e6e7e8e9eaebecedeeef"
"f0f1f2f3f4f5f6f7f8f9fafbfcfdfeff";
bool safe_strto32_base(absl::string_view text, int32_t* value, int base) {
return safe_int_internal<int32_t>(text, value, base);
}
bool safe_strto64_base(absl::string_view text, int64_t* value, int base) {
return safe_int_internal<int64_t>(text, value, base);
}
bool safe_strto128_base(absl::string_view text, int128* value, int base) {
return safe_int_internal<absl::int128>(text, value, base);
}
bool safe_strtou32_base(absl::string_view text, uint32_t* value, int base) {
return safe_uint_internal<uint32_t>(text, value, base);
}
bool safe_strtou64_base(absl::string_view text, uint64_t* value, int base) {
return safe_uint_internal<uint64_t>(text, value, base);
}
bool safe_strtou128_base(absl::string_view text, uint128* value, int base) {
return safe_uint_internal<absl::uint128>(text, value, base);
}
} // namespace numbers_internal
ABSL_NAMESPACE_END
} // namespace absl