ocsp_iopr.sh - mozsearch

Enable keyboard shortcuts

#! /bin/bash

# This Source Code Form is subject to the terms of the Mozilla Public

# License, v. 2.0. If a copy of the MPL was not distributed with this

# file, You can obtain one at http://mozilla.org/MPL/2.0/.

########################################################################

# mozilla/security/nss/tests/iopr/ocsp_iopr.sh

# NSS SSL interoperability QA. This file is included from ssl.sh

# needs to work on all Unix and Windows platforms

# special strings

# ---------------

#   FIXME ... known problems, search for this string

#   NOTE .... unexpected behavior

########################################################################

IOPR_OCSP_SOURCED=1

########################################################################

# The funtion works with variables defined in interoperability

# configuration file that gets downloaded from a webserver.

# The function sets test parameters defind for a particular type

# of testing.

# No return value

setTestParam() {

    type=$1

    testParam=`eval 'echo $'${type}Param`

    testDescription=`eval 'echo $'${type}Descr`

    testProto=`eval 'echo $'${type}Proto`

    testPort=`eval 'echo $'${type}Port`

    testResponder=`eval 'echo $'${type}ResponderCert`

    testValidCertNames=`eval 'echo $'${type}ValidCertNames`

    testRevokedCertNames=`eval 'echo $'${type}RevokedCertNames`

    testStatUnknownCertNames=`eval 'echo $'${type}StatUnknownCertNames`

########################################################################

# The funtion checks status of a cert using ocspclnt.

# Params:

#    dbDir - nss cert db location

#    cert - cert in question

#    respUrl - responder url is available

#    defRespCert - trusted responder cert

# Return values:

#    0 - test passed, 1 - otherwise.

ocsp_get_cert_status() {

    dbDir=$1

    cert=$2

    respUrl=$3

    defRespCert=$4

    if [ -n "$respUrl" -o -n "$defRespCert" ]; then

        if [ -z "$respUrl" -o -z "$defRespCert" ]; then

            html_failed "Incorrect test params"

            return 1

fi

        clntParam="-l $respUrl -t $defRespCert"

fi

    if [ -z "${MEMLEAK_DBG}" ]; then

        outFile=$dbDir/ocsptest.out.$$

        echo "ocspclnt -d $dbDir -S $cert $clntParam"

        ${BINDIR}/ocspclnt -d $dbDir -S $cert $clntParam >$outFile 2>&1

        ret=$?

        echo "ocspclnt output:"

        cat $outFile

        [ -z "`grep succeeded $outFile`" ] && ret=1

        rm -f $outFile

        return $ret

fi

    OCSP_ATTR="-d $dbDir -S $cert $clntParam"

    ${RUN_COMMAND_DBG} ${BINDIR}/ocspclnt ${OCSP_ATTR}

########################################################################

# The funtion checks status of a cert using ocspclnt.

# Params:

#    testType - type of the test based on type of used responder

#    servName - FQDM of the responder server

#    dbDir - nss cert db location

# No return value

ocsp_iopr() {

    testType=$1

    servName=$2

    dbDir=$3

    setTestParam $testType

    if [ "`echo $testParam | grep NOCOV`" != "" ]; then

        echo "SSL Cipher Coverage of WebServ($IOPR_HOSTADDR) excluded from " \

            "run by server configuration"

        return 0

fi

    if [ -z "${MEMLEAK_DBG}" ]; then

        html_head "OCSP testing with responder at $IOPR_HOSTADDR. <br>" \

            "Test Type: $testDescription"

fi

    if [ -n "$testResponder" ]; then

        responderUrl="$testProto://$servName:$testPort"

    else

        responderUrl=""

fi

    if [ -z "${MEMLEAK_DBG}" ]; then

        for certName in $testValidCertNames; do

            ocsp_get_cert_status $dbDir $certName "$responderUrl" \

                "$testResponder"

            html_msg $? 0 "Getting status of a valid cert ($certName)" \

                "produced a returncode of $ret, expected is 0."

        done

        for certName in $testRevokedCertNames; do

            ocsp_get_cert_status $dbDir $certName "$responderUrl" \

                "$testResponder"

            html_msg $? 1 "Getting status of a unvalid cert ($certName)" \

                "produced a returncode of $ret, expected is 1."

        done

        for certName in $testStatUnknownCertNames; do

            ocsp_get_cert_status $dbDir $certName "$responderUrl" \

                "$testResponder"

            html_msg $? 1 "Getting status of a cert with unknown status " \

                        "($certName) produced a returncode of $ret, expected is 1."

        done

    else

        for certName in $testValidCertNames $testRevokedCertNames \

            $testStatUnknownCertName; do

            ocsp_get_cert_status $dbDir $certName "$responderUrl" \

                "$testResponder"

        done

fi

#####################################################################

# Initial point for running ocsp test againt multiple hosts involved in

# interoperability testing. Called from nss/tests/ocsp/ocsp.sh

# It will only proceed with test run for a specific host if environment variable

# IOPR_HOSTADDR_LIST was set, had the host name in the list

# and all needed file were successfully downloaded and installed for the host.

# Returns 1 if interoperability testing is off, 0 otherwise.

ocsp_iopr_run() {

    NO_ECC_CERTS=1 # disable ECC for interoperability tests

    if [ "$IOPR" -ne 1 ]; then

        return 1

fi

    cd ${CLIENTDIR}

    if [ -n "${MEMLEAK_DBG}" ]; then

        html_head "Memory leak checking - IOPR"

fi

    num=1

    IOPR_HOST_PARAM=`echo "${IOPR_HOSTADDR_LIST} " | cut -f $num -d' '`

    while [ "$IOPR_HOST_PARAM" ]; do

        IOPR_HOSTADDR=`echo $IOPR_HOST_PARAM | cut -f 1 -d':'`

        IOPR_OPEN_PORT=`echo "$IOPR_HOST_PARAM:" | cut -f 2 -d':'`

        [ -z "$IOPR_OPEN_PORT" ] && IOPR_OPEN_PORT=443

        . ${IOPR_CADIR}_${IOPR_HOSTADDR}/iopr_server.cfg

        RES=$?

        num=`expr $num + 1`

        IOPR_HOST_PARAM=`echo "${IOPR_HOSTADDR_LIST} " | cut -f $num -d' '`

        if [ $RES -ne 0 -o X`echo "$wsFlags" | grep NOIOPR` != X ]; then

            continue

fi

        #=======================================================

        # Check what server is configured to run ssl tests

        [ -z "`echo ${supportedTests_new} | grep -i ocsp`" ] && continue;

        # Testing directories defined by webserver.

        if [ -n "${MEMLEAK_DBG}" ]; then

            LOGNAME=iopr-${IOPR_HOSTADDR}

            LOGFILE=${LOGDIR}/${LOGNAME}.log

fi

        # Testing directories defined by webserver.

        echo "Testing ocsp interoperability.

                Client: local(tstclnt).

                Responder: remote($IOPR_HOSTADDR)"

        for ocspTestType in ${supportedTests_new}; do

            if [ -z "`echo $ocspTestType | grep -i ocsp`" ]; then

                continue

fi

            if [ -n "${MEMLEAK_DBG}" ]; then

                ocsp_iopr $ocspTestType ${IOPR_HOSTADDR} \

                    ${IOPR_OCSP_CLIENTDIR}_${IOPR_HOSTADDR} 2>> ${LOGFILE}

            else

                ocsp_iopr $ocspTestType ${IOPR_HOSTADDR} \

                    ${IOPR_OCSP_CLIENTDIR}_${IOPR_HOSTADDR}

fi

        done

        if [ -n "${MEMLEAK_DBG}" ]; then

            log_parse

            ret=$?

            html_msg ${ret} 0 "${LOGNAME}" \

                "produced a returncode of $ret, expected is 0"

fi

        echo "================================================"

        echo "Done testing ocsp interoperability with $IOPR_HOSTADDR"

    done

    if [ -n "${MEMLEAK_DBG}" ]; then

        html "</TABLE><BR>"

fi

    NO_ECC_CERTS=0

    return 0