| .cvsignore |
|
9 |
| abstract.c |
|
3510 |
| accept.c |
1996 - Netscape Communications Corporation
*
* Name: accept.c
*
* Description: Run accept() sucessful connection tests.
*
* Modification History:
* 04-Jun-97 AGarcia - Reconvert test file to return a 0 for PASS and a 1 for
FAIL
* 13-May-97 AGarcia- Converted the test to accomodate the debug_mode
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
* 12-June-97 Revert to return code 0 and 1.
********************************************************************* |
14029 |
| acceptread.c |
PrintAddress |
7206 |
| acceptreademu.c |
This test is the same as acceptread.c except that it uses the
emulated acceptread method instead of the regular acceptread.
|
8370 |
| addrstr.c |
This is not necessarily an error |
2953 |
| affinity.c |
Test PR_GetThreadAffinityMask
The function is called by each of local, global and global bound threads
The test should be run on both single and multi-cpu systems
|
1842 |
| alarm.c |
1996 - Netscape Communications Corporation
*
* Name: alarmtst.c
*
* Description: Test alarms
*
* Modification History:
* 13-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
12789 |
| anonfm.c |
File: anonfm.c
* Description: Test anonymous file map
*
* Synopsis: anonfm [options] [dirName]
*
* Options:
* -d enable debug mode
* -h display a help message
* -s <n> size of the anonymous memory map, in KBytes. default: 100KBytes.
* -C 1 Operate this process as ClientOne()
* -C 2 Operate this process as ClientTwo()
*
* anonfn.c contains two tests, corresponding to the two protocols for
* passing an anonymous file map to a child process.
*
* ServerOne()/ClientOne() tests the passing of "raw" file map; it uses
* PR_CreateProcess() [for portability of the test case] to create the
* child process, but does not use the PRProcessAttr structure for
* passing the file map data.
*
* ServerTwo()/ClientTwo() tests the passing of the file map using the
* PRProcessAttr structure.
*
|
7199 |
| append.c |
File: append.c
* Description: Testing File writes where PR_APPEND was used on open
*
* append attempts to verify that a file opened with PR_APPEND
* will always append to the end of file, regardless where the
* current file pointer is positioned. To do this, PR_Seek() is
* called before each write with the position set to beginning of
* file. Subsequent writes should always append.
* The file is read back, summing the integer data written to the
* file. If the expected result is equal, the test passes.
*
* See BugSplat: 4090
|
3963 |
| atomic.c |
TODO: create a macro to generate the six lines of code that are repeated
for every test. Also rewrite the statement
result = result | ((EXPRESSION) ? 0 : 1);
as
result |= !(EXPRESSION);
|
5987 |
| attach.c |
1996 - Netscape Communications Corporation
*
* Name: attach.c
*
* Description: Platform-specific code to create a native thread. The native
thread will
* repeatedly call PR_AttachThread and
PR_DetachThread. The
* primordial thread waits for this new thread to
finish.
*
* Modification History:
* 13-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
* 12-June-97 Revert to return code 0 and 1.
********************************************************************* |
6453 |
| bigfile.c |
nothing happened |
9998 |
| bigfile2.c |
_WIN32 |
2543 |
| bigfile3.c |
_WIN32 |
2513 |
| bug1test.c |
Attached is a test program that uses the nspr1 to demonstrate a bug
under NT4.0. The fix has already been mentioned (add a ResetEvent just
before leaving the critical section in _PR_CondWait in hwmon.c).
|
5693 |
| cleanup.c |
Help |
3311 |
| cltsrv.c |
Notes:
[1] lth. The call to Sleep() is a hack to get the test case to run
on Windows 95. Without it, the test case fails with an error
WSAECONNRESET following a recv() call. The error is caused by the
server side thread termination without a shutdown() or closesocket()
call. Windows docmunentation suggests that this is predicted
behavior; that other platforms get away with it is ... serindipity.
The test case should shutdown() or closesocket() before
thread termination. I didn't have time to figure out where or how
to do it. The Sleep() call inserts enough delay to allow the
client side to recv() all his data before the server side thread
terminates. Whew! ...
* Modification History:
14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
The debug mode will print all of the printfs associated with this
test. The regress mode will be the default mode. Since the regress tool limits
the output to a one line status:PASS or FAIL,all of the printf
statements have been handled with an if (debug_mode) statement.
|
36707 |
| concur.c |
File: concur.c
* Description: test of adding and removing concurrency options
|
3676 |
| cvar.c |
1996 - Netscape Communications Corporation
*
* Name: cvar.c
*
* Description: Tests Condition Variable Operations
*
* Modification History:
* 13-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
* 12-June-97 Revert to return code 0 and 1.
********************************************************************* |
6922 |
| cvar2.c |
1996 - Netscape Communications Corporation
*
* Name: cvar2.c
*
* Description: Simple test creates several local and global threads;
* half use a single,shared condvar, and the
* other half have their own condvar. The main thread then loops
* notifying them to wakeup.
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
********************************************************************* |
23917 |
| dbmalloc.c |
Name: dbmalloc.c
*
* Description: Testing malloc (OBSOLETE)
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
********************************************************************* |
6518 |
| dbmalloc1.c |
Name: dbmalloc1.c (OBSOLETE)
*
* Description: Tests PR_SetMallocCountdown PR_ClearMallocCountdown functions.
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
*
* 12-June-97 AGarcia Revert to return code 0 and 1, remove debug option
(obsolete).
********************************************************************* |
2514 |
| dceemu.c |
File: dceemu.c
* Description: testing the DCE emulation api
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
* 12-June-97 Revert to return code 0 and 1, remove debug option (obsolete).
|
2794 |
| depend.c |
1996 - Netscape Communications Corporation
*
*
* Name: depend.c
* Description: Test to enumerate the dependencies
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
********************************************************************* |
3992 |
| dll |
|
|
| dlltest.c |
Name: dlltest.c
*
* Description: test dll functionality.
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
* 12-June-97 Revert to return code 0 and 1.
********************************************************************* |
5941 |
| dtoa.c |
This file contains a test program for the function conversion functions
for double precision code:
PR_strtod
PR_dtoa
PR_cnvtf
This file was ns/nspr/tests/dtoa.c, created by rrj on 1996/06/22.
*************************************************************************** |
6011 |
| env.c |
File: env.c
* Description: Testing environment variable operations
*
|
10994 |
| errcodes.c |
Name: errcodes.c
*
* Description: print nspr error codes
*
|
5536 |
| errset.c |
Name: errset.c
*
* Description: errset.c exercises the functions in prerror.c.
* This code is a unit test of the prerror.c capability.
*
* Note: There's some fluff in here. The guts of the test
* were plagerized from another test. So, sue me.
*
*
|
6258 |
| exit.c |
Help |
2685 |
| fdcach.c |
File: fdcach.c
Description:
This test verifies that the fd cache is working
correctly.
|
2895 |
| fileio.c |
Name: fileio.c
*
* Description: Program to copy one file to another.
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
* 12-June-97 Revert to return code 0 and 1, remove debug option (obsolete).
********************************************************************* |
4917 |
| foreign.c |
File: foreign.c
* Description: Testing various functions w/ foreign threads
*
* We create a thread and get it to call exactly one runtime function.
* The thread is allowed to be created by some other environment that
* NSPR, but it does not announce itself to the runtime prior to calling
* in.
*
* The goal: try to survive.
*
|
8384 |
| forktest.c |
Name: forktest.c
*
* Description: UNIX test for fork functions.
*
* Modification History:
* 15-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with
this test.
* The regress mode will be the default mode. Since the
regress tool limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
* 12-June-97 AGarcic - Revert to return code 0 and 1, remove debug option
(obsolete).
********************************************************************* |
6692 |
| formattm.c |
A test program for PR_FormatTime and PR_FormatTimeUSEnglish |
1442 |
| freeif.c |
A test to see if the macros PR_DELETE and PR_FREEIF are
properly defined. (See Bugzilla bug #39110.)
|
908 |
| fsync.c |
Help |
3465 |
| getai.c |
|
914 |
| gethost.c |
File: gethost.c
Description: tests various functions in prnetdb.h
Usage: gethost [-6] [hostname]
|
7552 |
| getproto.c |
File: getproto.c
A test program for PR_GetProtoByName and PR_GetProtoByNumber
************************************************************************
|
2624 |
| i2l.c |
Help |
2257 |
| initclk.c |
This is a regression test for the bug that the interval timer
is not initialized when _PR_CreateCPU calls PR_IntervalNow.
The bug would make this test program finish prematurely,
when the SHORT_TIMEOUT period expires. The correct behavior
is for the test to finish when the LONG_TIMEOUT period expires.
|
2151 |
| inrval.c |
file: inrval.c
* description: Interval conversion test.
* Modification History:
* 15-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
|
6679 |
| instrumt.c |
File: instrumt.c
* Description: This test is for the NSPR debug aids defined in
* prcountr.h, prtrace.h, prolock.h
*
* The test case tests the three debug aids in NSPR:
*
* Diagnostic messages can be enabled using "instrumt -v 6"
* This sets the msgLevel to something that PR_LOG() likes.
* Also define in the environment "NSPR_LOG_MODULES=Test:6"
*
* CounterTest() tests the counter facility. This test
* creates 4 threads. Each thread either increments, decrements,
* adds to or subtracts from a counter, depending on an argument
* passed to the thread at thread-create time. Each of these threads
* does COUNT_LIMIT iterations doing its thing. When all 4 threads
* are done, the result of the counter is evaluated. If all was atomic,
* the the value of the counter should be zero.
*
* TraceTest():
* This test mingles with the counter test. Counters trace.
* A thread to extract trace entries on the fly is started.
* A thread to dump trace entries to a file is started.
*
* OrderedLockTest():
*
*
*
*
*
|
11618 |
| intrio.c |
File: intrio.c
Purpose: testing i/o interrupts (see Bugzilla bug #31120)
|
3643 |
| intrupt.c |
File: intrupt.c
Purpose: testing thread interrupts
|
8685 |
| io_timeout.c |
Test socket IO timeouts
*
*
*
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
********************************************************************* |
6571 |
| io_timeoutk.c |
name io_timeoutk.c
* Description:Test socket IO timeouts (kernel level)
*
* Modification History:
* 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
5468 |
| io_timeoutu.c |
name io_timeoutu.c
* Description: Test socket IO timeouts (user level)
*
* Modification History:
* 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
5490 |
| ioconthr.c |
This is a test for the io continuation thread machinery
in pthreads.
|
3384 |
| ipv6.c |
Help |
6388 |
| join.c |
Name: dbmalloc1.c
*
* Description: Tests PR_SetMallocCountdown PR_ClearMallocCountdown functions.
*
* Modification History:
*
* 19-May-97 AGarcia - separate the four join tests into different unit test
modules.
* AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
********************************************************************* |
6072 |
| joinkk.c |
Name: dbmalloc1.c
*
* Description: Tests PR_SetMallocCountdown PR_ClearMallocCountdown functions.
*
* Modification History:
*
* 19-May-97 AGarcia - separate the four join tests into different unit test
modules.
* AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
4155 |
| joinku.c |
Name: dbmalloc1.c
*
* Description: Tests PR_SetMallocCountdown PR_ClearMallocCountdown functions.
*
* Modification History:
*
* 19-May-97 AGarcia - separate the four join tests into different unit test
modules.
* AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
4223 |
| joinuk.c |
Name: joinuk.c
*
* Description: Join kernel - user
*
* Modification History:
*
* 19-May-97 AGarcia - separate the four join tests into different unit test
modules.
* AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
4175 |
| joinuu.c |
Name: dbmalloc1.c
*
* Description: Join tests user - user
*
* Modification History:
*
* 19-May-97 AGarcia - separate the four join tests into different unit test
modules.
* AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
4179 |
| layer.c |
Testing layering of I/O
*
* The layered server
* A thread that acts as a server. It creates a TCP listener with a dummy
* layer pushed on top. Then listens for incoming connections. Each connection
* request for connection will be layered as well, accept one request, echo
* it back and close.
*
* The layered client
* Pretty much what you'd expect.
|
14614 |
| lazyinit.c |
File: lazyinit.c
* Description: Testing lazy initialization
*
* Since you only get to initialize once, you have to rerun the test
* for each test case. The test cases are numbered. If you want to
* add more tests, take the next number and add it to the switch
* statement.
*
* This test is problematic on systems that don't support the notion
* of console output. The workarounds to emulate that feature include
* initializations themselves, which defeats the purpose here.
|
2516 |
| libfilename.c |
Name: libfilename.c
*
* Description: test PR_GetLibraryFilePathname.
*
********************************************************************* |
2598 |
| lltest.c |
testll.c -- test suite for 64bit integer (longlong) operations
*
* Summary: testll [-d] | [-h]
*
* Where:
* -d set debug mode on; displays individual test failures
* -v verbose mode; displays progress in test, plus -d
* -h gives usage message.
*
* Description:
* lltest.c tests the functions defined in NSPR 2.0's prlong.h.
*
* Successive tests begin to depend on other LL functions working
* correctly. So, ... Do not change the order of the tests as run
* from main().
*
* Caveats:
* Do not even begin to think that this is an exhaustive test!
*
* These tests try a little of everything, but not all boundary
* conditions and limits are tested.
* You want better coverage? ... Add it.
*
* ---
* Author: Lawrence Hardiman <larryh@netscape.com>.
* ---
* Revision History:
* 01-Oct-1997. Original implementation.
*
|
23581 |
| lock.c |
File: lock.c
* Purpose: test basic locking functions
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
*
* 11-Aug-97 LarryH. Win16 port of NSPR.
* - Added "PASS", "FAIL" messages on completion.
* - Change stack variables to static scope variables
* because of shadow-stack use by Win16
* - Added PR_CALLBACK attribute to functions called by NSPR
* - Added command line arguments:
* - l <num> to control the number of loops
* - c <num> to control the number of CPUs.
* (was positional argv).
*
*
********************************************************************* |
15128 |
| lockfile.c |
File: lockfile.c
* Purpose: test basic locking functions
* Just because this times stuff, don't think its a perforamnce
* test!!!
*
* Modification History:
* 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
6958 |
| logfile.c |
A regression test for bug 491441. NSPR should not crash on startup in
PR_SetLogFile when the NSPR_LOG_MODULES and NSPR_LOG_FILE environment
variables are set.
This test could be extended to be a full-blown test for NSPR_LOG_FILE.
|
1053 |
| logger.c |
File: logger.c
Description: test program for logging's basic functions
|
2884 |
| makedir.c |
This test calls PR_MakeDir to create a bunch of directories
with various mode bits.
|
1847 |
| Makefile.in |
|
9134 |
| many_cv.c |
RandomNum |
2973 |
| mbcs.c |
File: mbcs.c
*
* Synopsis: mbcs {dirName}
*
* where dirName is the directory to be traversed. dirName is required.
*
* Description:
* mbcs.c tests use of multi-byte characters, as would be passed to
* NSPR funtions by internationalized applications.
*
* mbcs.c, when run on any single-byte platform, should run correctly.
* In truth, running the mbcs test on a single-byte platform is
* really meaningless. mbcs.c, nor any NSPR library or test is not
* intended for use with any wide character set, including Unicode.
* mbcs.c should not be included in runtests.ksh because it requires
* extensive user intervention to set-up and run.
*
* mbcs.c should be run on a platform using some form of multi-byte
* characters. The initial platform for this test is a Japanese
* language Windows NT 4.0 machine. ... Thank you Noriko Hoshi.
*
* To run mbcs.c, the tester should create a directory tree containing
* some files in the same directory from which the test is run; i.e.
* the current working directory. The directory and files should be
* named such that when represented in the local multi-byte character
* set, one or more characters of the name is longer than a single
* byte.
*
|
4660 |
| monref.c |
This test program demonstrates that PR_ExitMonitor needs to add a
reference to the PRMonitor object before unlocking the internal
mutex.
|
1692 |
| multiacc.c |
File: multiacc.c
Description:
This test creates multiple threads that accept on the
same listening socket.
|
6182 |
| multiwait.c |
_MW_Assert |
21115 |
| nameshm1.c |
File: nameshm1.c -- Test Named Shared Memory
*
* Description:
* nameshm1 tests Named Shared Memory. nameshm1 performs two tests of
* named shared memory.
*
* The first test is a basic test. The basic test operates as a single
* process. The process exercises all the API elements of the facility.
* This test also attempts to write to all locations in the shared
* memory.
*
* The second test is a client-server test. The client-server test
* creates a new instance of nameshm1, passing the -C argument to the
* new process; this creates the client-side process. The server-side
* (the instance of nameshm1 created from the command line) and the
* client-side interact via inter-process semaphores to verify that the
* shared memory segment can be read and written by both sides in a
* synchronized maner.
*
* Note: Because this test runs in two processes, the log files created
* by the test are not in chronological sequence; makes it hard to read.
* As a temporary circumvention, I changed the definition(s) of the
* _PUT_LOG() macro in prlog.c to force a flushall(), or equivalent.
* This causes the log entries to be emitted in true chronological
* order.
*
* Synopsis: nameshm1 [options] [name]
*
* Options:
* -d Enables debug trace via PR_LOG()
* -v Enables verbose mode debug trace via PR_LOG()
* -w Causes the basic test to attempt to write to the segment
* mapped as read-only. When this option is specified, the
* test should crash with a seg-fault; this is a destructive
* test and is considered successful when it seg-faults.
*
* -C Causes nameshm1 to start as the client-side of a
* client-server pair of processes. Only the instance
* of nameshm1 operating as the server-side process should
* specify the -C option when creating the client-side process;
* the -C option should not be specified at the command line.
* The client-side uses the shared memory segment created by
* the server-side to communicate with the server-side
* process.
*
* -p <n> Specify the number of iterations the client-server tests
* should perform. Default: 1000.
*
* -s <n> Size, in KBytes (1024), of the shared memory segment.
* Default: (10 * 1024)
*
* -i <n> Number of client-side iterations. Default: 3
*
* name specifies the name of the shared memory segment to be used.
* Default: /tmp/xxxNSPRshm
*
*
* See also: prshm.h
*
* /lth. Aug-1999.
|
15202 |
| nbconn.c |
A test for nonblocking connect. Functions tested include PR_Connect,
PR_Poll, and PR_GetConnectStatus.
The test should be invoked with a host name, for example:
nbconn www.netscape.com
It will do a nonblocking connect to port 80 (HTTP) on that host,
and when connected, issue the "GET /" HTTP command.
You should run this test in three ways:
1. To a known web site, such as www.netscape.com. The HTML of the
top-level page at the web site should be printed.
2. To a machine not running a web server at port 80. This test should
fail. Ideally the error code should be PR_CONNECT_REFUSED_ERROR.
But it is possible to return PR_UNKNOWN_ERROR on certain platforms.
3. To an unreachable machine, for example, a machine that is off line.
The test should fail after the connect times out. Ideally the
error code should be PR_IO_TIMEOUT_ERROR, but it is possible to
return PR_UNKNOWN_ERROR on certain platforms.
|
14777 |
| nblayer.c |
Testing layering of I/O
*
* The layered server
* A thread that acts as a server. It creates a TCP listener with a dummy
* layer pushed on top. Then listens for incoming connections. Each connection
* request for connection will be layered as well, accept one request, echo
* it back and close.
*
* The layered client
* Pretty much what you'd expect.
|
22910 |
| nonblock.c |
unit time in milliseconds |
6093 |
| ntioto.c |
File: ntioto.c
* Description:
* This test, ntioto.c, was designed to reproduce a bug reported by NES
* on WindowsNT (fibers implementation). NSPR was asserting in ntio.c
* after PR_AcceptRead() had timed out. I/O performed subsequent to the
* call to PR_AcceptRead() could complete on a CPU other than the one
* on which it was started. The assert in ntio.c detected this, then
* asserted.
*
* Design:
* This test will fail with an assert in ntio.c if the problem it was
* designed to catch occurs. It returns 0 otherwise.
*
* The main() thread initializes and tears things down. A file is
* opened for writing; this file will be written to by AcceptThread()
* and JitterThread(). Main() creates a socket for reading, listens
* and binds the socket.
*
* ConnectThread() connects to the socket created by main, then polls
* the "state" variable. When state is AllDone, ConnectThread() exits.
*
* AcceptThread() calls PR_AcceptRead() on the socket. He fully expects
* it to time out. After the timeout, AccpetThread() interacts with
* JitterThread() via a common condition variable and the state
* variable. The two threads ping-pong back and forth, each thread
* writes the the file opened by main. This should provoke the
* condition reported by NES (if we didn't fix it).
*
* The failure is not solid. It may fail within a few ping-pongs between
* AcceptThread() and JitterThread() or may take a while. The default
* iteration count, jitter, is set by DEFAULT_JITTER. This may be
* modified at the command line with the -j option.
*
|
7981 |
| ntoh.c |
A test program for PR_htons, PR_ntohs, PR_htonl, PR_ntohl,
PR_htonll, and PR_ntohll.
|
2466 |
| obsints.c |
Test: obsints.c
Description: make sure that protypes.h defines the obsolete integer
types intn, uintn, uint, int8, uint8, int16, uint16, int32, uint32,
int64, and uint64.
|
1049 |
| op_2long.c |
Name: op_2long.c
*
* Description: Test Program to verify the PR_NAME_TOO_LONG_ERROR
*
* Modification History:
* 03-June-97 AGarcia- Initial version
********************************************************************* |
1802 |
| op_excl.c |
Name: op_excl.c
*
* Description: Test Program to verify function of PR_EXCL open flag
*
* Modification History:
* 27-Oct-1999 lth. Initial version
********************************************************************* |
3149 |
| op_filnf.c |
Name: op_filnf.c
*
* Description: Test Program to verify the PR_FILE_NOT_FOUND_ERROR
* This test program also uses the TRUNCATE option
*
* Modification History:
* 03-June-97 AGarcia- Initial version
********************************************************************* |
1524 |
| op_filok.c |
Name: op_filok.c
*
* Description: Test Program to verify the PR_Open finding an existing file.
*
* Modification History:
* 03-June-97 AGarcia- Initial version
********************************************************************* |
1382 |
| op_noacc.c |
Name: op_noacc.c
*
* Description: Test Program to verify the PR_NO_ACCESS_RIGHTS_ERROR in PR_Open
*
* Modification History:
* 03-June-97 AGarcia- Initial version
********************************************************************* |
1456 |
| op_nofil.c |
Name: op_nofil.c
*
* Description: Test Program to verify the PR_FILE_NOT_FOUND_ERROR
*
* Modification History:
* 03-June-97 AGarcia- Initial version
********************************************************************* |
1637 |
| openfile.c |
This test calls PR_OpenFile to create a bunch of files
with various file modes.
|
2995 |
| parent.c |
file: parent.c
* description: test the process machinery
|
3008 |
| parsetm.c |
This test program should eventually become a full-blown test for
PR_ParseTimeString. Right now it just verifies that PR_ParseTimeString
doesn't crash on an out-of-range time string (bug 480740).
|
2510 |
| peek.c |
A test case for the PR_MSG_PEEK flag of PR_Recv().
Test both blocking and non-blocking sockets.
|
10079 |
| perf.c |
/
static void PR_CALLBACK dull(void* arg) {}
static void CDThread(void) {
PRInt32 i;
int num_threads = count;
/*
Cannot create too many threads
|
10305 |
| pipeping.c |
File: pipeping.c
Description:
This test runs in conjunction with the pipepong test.
This test creates two pipes and redirects the stdin and
stdout of the pipepong test to the pipes. Then this
test writes "ping" to the pipepong test and the pipepong
test writes "pong" back. To run this pair of tests,
just invoke pipeping.
Tested areas: process creation, pipes, file descriptor
inheritance, standard I/O redirection.
|
4156 |
| pipeping2.c |
File: pipeping2.c
Description:
This test runs in conjunction with the pipepong2 test.
This test creates two pipes and passes two pipe fd's
to the pipepong2 test. Then this test writes "ping" to
to the pipepong2 test and the pipepong2 test writes "pong"
back. To run this pair of tests, just invoke pipeping2.
Tested areas: process creation, pipes, file descriptor
inheritance.
|
4288 |
| pipepong.c |
File: pipepong.c
Description:
This test runs in conjunction with the pipeping test.
The pipeping test creates two pipes and redirects the
stdin and stdout of this test to the pipes. Then the
pipeping test writes "ping" to this test and this test
writes "pong" back. Note that this test does not depend
on NSPR at all. To run this pair of tests, just invoke
pipeping.
Tested areas: process creation, pipes, file descriptor
inheritance, standard I/O redirection.
|
1688 |
| pipepong2.c |
File: pipepong2.c
Description:
This test runs in conjunction with the pipeping2 test.
The pipeping2 test creates two pipes and passes two
pipe fd's to this test. Then the pipeping2 test writes
"ping" to this test and this test writes "pong" back.
To run this pair of tests, just invoke pipeping2.
Tested areas: process creation, pipes, file descriptor
inheritance.
|
2629 |
| pipeself.c |
File: pipeself.c
Description:
This test has two threads communicating with each other using
two unidirectional pipes. The primordial thread is the ping
thread and the other thread is the pong thread. The ping
thread writes "ping" to the pong thread and the pong thread
writes "pong" back.
|
6125 |
| poll_er.c |
Name: prpoll_err.c
*
* Description: This program tests PR_Poll with sockets.
* error reporting operation is tested
*
* Modification History:
* 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
5921 |
| poll_nm.c |
Name: prpoll_norm.c
*
* Description: This program tests PR_Poll with sockets.
* Normal operation are tested
*
* Modification History:
* 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
10271 |
| poll_to.c |
Name: prpoll_to.c
*
* Description: This program tests PR_Poll with sockets.
* Timeout operation is tested
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
5628 |
| pollable.c |
A test for the pollable events.
A number of threads are in a ring configuration, each waiting on
a pollable event that is set by its upstream neighbor.
|
7279 |
| prfdbl.c |
This is a simple test of the PR_fprintf() function for doubles.
|
868 |
| prftest.c |
File: prftest.c
Description:
This is a simple test of the PR_snprintf() function defined
in prprf.c.
|
1530 |
| prftest1.c |
File: prftest1.c
* Description:
* This is a simple test of the PR_snprintf() function defined
* in prprf.c.
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
********************************************************************* |
3344 |
| prftest2.c |
File: prftest2.c
* Description:
* This is a simple test of the PR_snprintf() function defined
* in prprf.c.
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
2785 |
| prfz.c |
This is a simple test of the PR_fprintf() function for size_t formats.
|
2174 |
| primblok.c |
File: primblok.c
Purpose: testing whether the primordial thread can block in a
native blocking function without affecting the correct
functioning of NSPR I/O functions (Bugzilla bug #30746)
|
2940 |
| priotest.c |
File: priotest.c
Purpose: testing priorities
|
5542 |
| provider.c |
Notes:
[1] lth. The call to Sleep() is a hack to get the test case to run
on Windows 95. Without it, the test case fails with an error
WSAECONNRESET following a recv() call. The error is caused by the
server side thread termination without a shutdown() or closesocket()
call. Windows docmunentation suggests that this is predicted
behavior; that other platforms get away with it is ... serindipity.
The test case should shutdown() or closesocket() before
thread termination. I didn't have time to figure out where or how
to do it. The Sleep() call inserts enough delay to allow the
client side to recv() all his data before the server side thread
terminates. Whew! ...
* Modification History:
14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
The debug mode will print all of the printfs associated with this
test. The regress mode will be the default mode. Since the regress tool limits
the output to a one line status:PASS or FAIL,all of the printf
statements have been handled with an if (debug_mode) statement.
|
39680 |
| prpoll.c |
for close() |
10187 |
| prpollml.c |
This test exercises the code that allocates and frees the syspoll_list
array of PRThread in the pthreads version. This test is intended to be
run under Purify to verify that there is no memory leak.
|
3956 |
| prselect.c |
1997 - Netscape Communications Corporation
*
* Name: prselect_err.c
*
* Description: tests PR_Select with sockets Error condition functions.
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
********************************************************************* |
10200 |
| prttools.h |
Used in Regress Tool |
384 |
| pushtop.c |
A regression test for bug 794316 |
1865 |
| randseed.c |
File: rngseed.c
* Description:
* Test NSPR's Random Number Seed generator
*
* Initial test: Just make sure it outputs some data.
*
* ... more? ... check some iterations to ensure it is random (no dupes)
* ... more? ... histogram distribution of random numbers
|
2982 |
| ranfile.c |
Contact: AOF<freier@netscape.com>
*
* Name: ranfile.c
*
* Description: Test to hammer on various components of NSPR
* Modification History:
* 20-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
12781 |
| README.TXT |
File: pr/tests/readme |
7263 |
| reinit.c |
This test verifies that NSPR can be cleaned up and reinitialized. |
893 |
| rmdir.c |
File: rmdir.c
* Description: Demonstrate bugzilla 80884.
*
* after fix to unix_errors.c, message should report correct
* failure of PR_Rmdir().
*
*
*
|
2299 |
| runtests.pl |
|
7834 |
| runtests.sh |
|
5119 |
| runy2ktests.ksh |
|
3604 |
| rwlockrank.c |
RWLock rank tests
|
2823 |
| rwlocktest.c |
RWLock tests
Several threads are created to access and modify data arrays using
PRRWLocks for synchronization. Two data arrays, array_A and array_B, are
initialized with random data and a third array, array_C, is initialized
with the sum of the first 2 arrays.
Each one of the threads acquires a read lock to verify that the sum of
the arrays A and B is equal to array C, and acquires a write lock to
consistently update arrays A and B so that their is equal to array C.
|
4877 |
| sel_spd.c |
Test the speed of select within NSPR
|
13947 |
| selct_er.c |
1997 - Netscape Communications Corporation
*
* Name: prselect_err.c
*
* Description: tests PR_Select with sockets Error condition functions.
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
5633 |
| selct_nm.c |
1997 - Netscape Communications Corporation
*
* Name: prselect_norm.c
*
* Description: tests PR_Select with sockets - Normal operations.
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
8304 |
| selct_to.c |
1997 - Netscape Communications Corporation
*
* Name: prselect_to.c
*
* Description: tests PR_Select with sockets. Time out functions
*
* Modification History:
* 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
5266 |
| select2.c |
Name: select2.c
*
* Description: Measure PR_Select and Empty_Select performance.
*
* Modification History:
* 20-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
********************************************************************* |
8684 |
| selintr.c |
Test whether classic NSPR's select() wrapper properly blocks
the periodic SIGALRM clocks. On some platforms (such as
HP-UX and SINIX) an interrupted select() system call is
restarted with the originally specified timeout, ignoring
the time that has elapsed. If a select() call is interrupted
repeatedly, it will never time out. (See Bugzilla bug #39674.)
|
1201 |
| sem.c |
Name: sem.c
*
* Description: Tests Semaphonre functions.
*
* Modification History:
* 20-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
5405 |
| sema.c |
Thread 2 waits on semaphore 2 and posts to semaphore 1.
|
4391 |
| semaerr.c |
Help |
3322 |
| semaerr1.c |
Help |
3045 |
| semaping.c |
Help |
5378 |
| semapong.c |
Help |
3486 |
| sendzlf.c |
Test: sendzlf.c
Description: send a zero-length file with PR_SendFile and
PR_TransmitFile.
|
6209 |
| server_test.c |
This server simulates a server running in loopback mode.
*
* The idea is that a single server is created. The server initially creates
* a number of worker threads. Then, with the server running, a number of
* clients are created which start requesting service from the server.
*
*
* Modification History:
* 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
********************************************************************* |
16156 |
| servr_kk.c |
This server simulates a server running in loopback mode.
*
* The idea is that a single server is created. The server initially creates
* a number of worker threads. Then, with the server running, a number of
* clients are created which start requesting service from the server.
*
*
* Modification History:
* 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
15434 |
| servr_ku.c |
This server simulates a server running in loopback mode.
*
* The idea is that a single server is created. The server initially creates
* a number of worker threads. Then, with the server running, a number of
* clients are created which start requesting service from the server.
*
*
* Modification History:
* 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
15093 |
| servr_uk.c |
This server simulates a server running in loopback mode.
*
* The idea is that a single server is created. The server initially creates
* a number of worker threads. Then, with the server running, a number of
* clients are created which start requesting service from the server.
*
*
* Modification History:
* 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
15070 |
| servr_uu.c |
This server simulates a server running in loopback mode.
*
* The idea is that a single server is created. The server initially creates
* a number of worker threads. Then, with the server running, a number of
* clients are created which start requesting service from the server.
*
*
* Modification History:
* 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
********************************************************************* |
15091 |
| short_thread.c |
Create a thread that exits right away; useful for testing race conditions in
thread creation
|
1497 |
| sigpipe.c |
Test: sigpipe.c
Test the SIGPIPE handler in NSPR. This test applies to Unix only.
************************************************************************
|
1899 |
| socket.c |
Name: socket.c
*
* Description: Test socket functionality.
*
* Modification History:
|
64750 |
| sockopt.c |
SO_REUSEPORT |
5235 |
| sockping.c |
File: sockping.c
Description:
This test runs in conjunction with the sockpong test.
This test creates a socket pair and passes one socket
to the sockpong test. Then this test writes "ping" to
to the sockpong test and the sockpong test writes "pong"
back. To run this pair of tests, just invoke sockping.
Tested areas: process creation, socket pairs, file
descriptor inheritance.
|
3500 |
| sockpong.c |
File: sockpong.c
Description:
This test runs in conjunction with the sockping test.
The sockping test creates a socket pair and passes one
socket to this test. Then the sockping test writes
"ping" to this test and this test writes "pong" back.
To run this pair of tests, just invoke sockping.
Tested areas: process creation, socket pairs, file
descriptor inheritance.
|
2160 |
| sprintf.c |
File: sprintf.c
Description:
This is a test program for the PR_snprintf() functions defined
in prprf.c. This test program is based on ns/nspr/tests/sprintf.c,
revision 1.10.
Modification History:
20-May-1997 AGarcia replaced printf statment to return PASS\n. This is to be
used by the regress tool parsing routine.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to recognize the return code from tha main program.
|
12122 |
| stack.c |
Test atomic stack operations
Two stacks are created and threads add data items (each containing
one of the first n integers) to the first stack, remove data items
from the first stack and add them to the second stack. The primordial
thread compares the sum of the first n integers to the sum of the
integers in the data items in the second stack. The test succeeds if
they are equal.
|
7042 |
| stat.c |
Program to test different ways to get file info; right now it
only works for solaris and OS/2.
|
1704 |
| stdio.c |
File: stdio.c
Description: testing the "special" fds
Modification History:
20-May-1997 AGarcia - Replace Test succeeded status with PASS. This is used
by the regress tool parsing code.
* 04-June-97 AGarcia removed the Test_Result function. Regress tool has been
updated to
* recognize the return code from tha main program.
|
1395 |
| str2addr.c |
File: str2addr.c
Description: a test for PR_StringToNetAddr
|
1366 |
| strod.c |
Help |
2026 |
| suspend.c |
secs |
4183 |
| switch.c |
File: switch.c
* Description: trying to time context switches
|
6436 |
| system.c |
Incr |
1572 |
| testbit.c |
File: lazyinit.c
* Description: Test the functions and macros declared in prbit.h
*
|
2215 |
| testfile.c |
|
23439 |
| threads.c |
Wait for all threads to exit |
4465 |
| thrpool_client.c |
Name: thrpool_client.c
*
* Description: Test threadpool functionality.
*
* Modification History:
|
9008 |
| thrpool_server.c |
Name: thrpool.c
*
* Description: Test threadpool functionality.
*
* Modification History:
|
14661 |
| thruput.c |
File: thruput.c
* Description: Test server's throughput capability comparing various
* implmentation strategies.
*
* Note: Requires a server machine and an aribitrary number of
* clients to bang on it. Trust the numbers on the server
* more than those being displayed by the various clients.
|
11139 |
| time.c |
Program to test different ways to get the time; right now it is tuned
only for solaris.
solaris results (100000 iterations):
time to get time with time(): 4.63 usec avg, 463 msec total
time to get time with gethrtime(): 2.17 usec avg, 217 msec total
time to get time with gettimeofday(): 1.25 usec avg, 125 msec total
|
3654 |
| timemac.c |
file: timemac.c
description: test time and date routines on the Mac
|
3247 |
| timetest.c |
file: timetest.c
description: test time and date routines
|
22693 |
| tmoacc.c |
should be significantly smaller than RAND_MAX |
8868 |
| tmocon.c |
Name: tmocon.c
*
* Description: test client socket connection.
*
* Modification History:
* 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
* The debug mode will print all of the printfs associated with this
test.
* The regress mode will be the default mode. Since the regress tool
limits
* the output to a one line status:PASS or FAIL,all of the printf
statements
* have been handled with an if (debug_mode) statement.
********************************************************************* |
11784 |
| tpd.c |
File: tpd.c
* Description: Exercising the thread private data bailywick.
|
6932 |
| udpsrv.c |
udpsrc.c -- Test basic function of UDP server
*
* udpsrv operates on the same machine with program udpclt.
* udpsrv is the server side of a udp sockets application.
* udpclt is the client side of a udp sockets application.
*
* The test is designed to assist developers in porting/debugging
* the UDP socket functions of NSPR.
*
* This test is not a stress test.
*
* main() starts two threads: UDP_Server() and UDP_Client();
* main() uses PR_JoinThread() to wait for the threads to complete.
*
* UDP_Server() does repeated recvfrom()s from a socket.
* He detects an EOF condition set by UDP_Client(). For each
* packet received by UDP_Server(), he checks its content for
* expected content, then sends the packet back to UDP_Client().
*
* UDP_Client() sends packets to UDP_Server() using sendto()
* he recieves packets back from the server via recvfrom().
* After he sends enough packets containing UDP_AMOUNT_TO_WRITE
* bytes of data, he sends an EOF message.
*
* The test issues a pass/fail message at end.
*
* Notes:
* The variable "_debug_on" can be set to 1 to cause diagnostic
* messages related to client/server synchronization. Useful when
* the test hangs.
*
* Error messages are written to stdout.
*
*******************************************************************
|
14303 |
| ut_ttools.h |
Used in Regress Tool |
384 |
| vercheck.c |
File: vercheck.c
Description:
This test tests the PR_VersionCheck() function. The
compatible_version and incompatible_version arrays
need to be updated for each patch or release.
Tested areas: library version compatibility check.
|
3026 |
| version.c |
fully qualified library name |
2849 |
| writev.c |
USAGE
-h dns name of host serving the connection (default = self)
-m number of messages to send (default = 100)
-s size of each message (default = 100)
-f size of each message fragment (default = 100)
|
6354 |
| xnotify.c |
LogNow |
10101 |
| y2k.c |
file: y2k.c
description: Test for y2k compliance for NSPR.
Sep 1999. lth. Added "Sun" specified dates to the test data.
|
33970 |
| y2ktmo.c |
Test: y2ktmo
Description:
This test tests the interval time facilities in NSPR for Y2K
compliance. All the functions that take a timeout argument
are tested: PR_Sleep, socket I/O (PR_Accept is taken as a
representative), PR_Poll, PR_WaitCondVar, PR_Wait, and
PR_CWait. A thread of each thread scope (local, global, and
global bound) is created to call each of these functions.
The test should be started at the specified number of seconds
(called the lead time) before a Y2K rollover test date. The
timeout values for these threads will span over the rollover
date by at least the specified number of seconds. For
example, if the lead time is 5 seconds, the test should
be started at time (D - 5), where D is a rollover date, and
the threads will time out at or after time (D + 5). The
timeout values for the threads are spaced one second apart.
When a thread times out, it calls PR_IntervalNow() to verify
that it did wait for the specified time. In addition, it
calls a platform-native function to verify the actual elapsed
time again, to rule out the possibility that PR_IntervalNow()
is broken. We allow the actual elapsed time to deviate from
the specified timeout by a certain tolerance (in milliseconds).
|
16221 |
| zerolen.c |
Test: zerolen.c
Description: a test for Bugzilla bug #17699. We perform
the same test for PR_Writev, PR_Write, and PR_Send. In
each test the server thread first fills up the connection
to the client so that the next write operation will fail
with EAGAIN. Then it calls PR_Writev, PR_Write, or PR_Send
with a zero-length buffer. The client thread initially
does not read so that the connection can be filled up.
Then it empties the connection so that the server thread's
PR_Writev, PR_Write, or PR_Send call can succeed.
Bug #17699 is specific to the pthreads version on Unix,
so on other platforms this test does nothing.
|
6886 |