Source code
Revision control
Copy as Markdown
Other Tools
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
#include "nsISupports.idl"
/**
* URIs are essentially structured names for things -- anything. This interface
* provides accessors to get the most basic components of an URI.
* If you need to change some parts of the URI use nsIURIMutator.
* Subclasses, including nsIURL, impose greater structure on the URI.
*
* This interface follows Tim Berners-Lee's URI spec (RFC3986) [1], where the
* basic URI components are defined as such:
* <pre>
* \ / \ / \ / \ /\ / \ / \ /
* - --------------- ------ -------- ------- --- -
* | | | | | | |
* | | | | FilePath Query Ref
* | | | Port \ /
* | | Host / ------------
* | UserPass / |
* Scheme / Path
* \ /
* --------------------------------
* |
* PrePath
* </pre>
* The definition of the URI components has been extended to allow for
* internationalized domain names [2] and the more generic IRI structure [3].
*
*/
%{C++
#include "nsString.h"
#undef GetPort // XXX Windows!
#undef SetPort // XXX Windows!
namespace mozilla {
class Encoding;
namespace ipc {
class URIParams;
} // namespace ipc
} // namespace mozilla
%}
[ptr] native Encoding(const mozilla::Encoding);
[ref] native URIParams(mozilla::ipc::URIParams);
interface nsIURIMutator;
/**
* nsIURI - interface for an uniform resource identifier w/ i18n support.
*
* AUTF8String attributes may contain unescaped UTF-8 characters.
* Consumers should be careful to escape the UTF-8 strings as necessary, but
* should always try to "display" the UTF-8 version as provided by this
* interface.
*
* AUTF8String attributes may also contain escaped characters.
*
* Unescaping URI segments is unadvised unless there is intimate
* knowledge of the underlying charset or there is no plan to display (or
* otherwise enforce a charset on) the resulting URI substring.
*
* The correct way to create an nsIURI from a string is via
* nsIIOService.newURI.
*
* NOTE: nsBinaryInputStream::ReadObject contains a hackaround to intercept the
* old (pre-gecko6) nsIURI IID and swap in the current IID instead, in order
* for sessionstore to work after an upgrade. If this IID is revved further,
* we will need to add additional checks there for all intermediate IIDs, until
*/
[scriptable, builtinclass, uuid(92073a54-6d78-4f30-913a-b871813208c6)]
interface nsIURI : nsISupports
{
/************************************************************************
* The URI is broken down into the following principal components:
*/
/**
* Returns a string representation of the URI.
*
* Some characters may be escaped.
*/
readonly attribute AUTF8String spec;
%{ C++
// An infallible wrapper for GetSpec() that returns a failure indication
// string if GetSpec() fails. It is most useful for creating
// logging/warning/error messages produced for human consumption, and when
// matching a URI spec against a fixed spec such as about:blank.
nsCString GetSpecOrDefault()
{
nsCString spec;
nsresult rv = GetSpec(spec);
if (NS_FAILED(rv)) {
spec.AssignLiteral("[nsIURI::GetSpec failed]");
}
return spec;
}
%}
/**
* before the path. This is useful for authentication or managing sessions.
*
* Some characters may be escaped.
*/
readonly attribute AUTF8String prePath;
/**
* The Scheme is the protocol to which this URI refers. The scheme is
* restricted to the US-ASCII charset per RFC3986.
*/
readonly attribute ACString scheme;
/**
* The username:password (or username only if value doesn't contain a ':')
*
* Some characters may be escaped.
*/
readonly attribute AUTF8String userPass;
/**
* The optional username and password, assuming the preHost consists of
* username:password.
*
* Some characters may be escaped.
*/
readonly attribute AUTF8String username;
readonly attribute AUTF8String password;
/**
* The host:port (or simply the host, if port == -1).
*/
readonly attribute AUTF8String hostPort;
/**
* The host is the internet domain name to which this URI refers. It could
* be an IPv4 (or IPv6) address literal. Otherwise it is an ASCII or punycode
* encoded string.
*/
readonly attribute AUTF8String host;
/**
* A port value of -1 corresponds to the protocol's default port (eg. -1
* implies port 80 for http URIs).
*/
readonly attribute long port;
/**
* The path, typically including at least a leading '/' (but may also be
* empty, depending on the protocol).
*
* Some characters may be escaped.
*
* This attribute contains query and ref parts for historical reasons.
* Use the 'filePath' attribute if you do not want those parts included.
*/
readonly attribute AUTF8String pathQueryRef;
/************************************************************************
* An URI supports the following methods:
*/
/**
* URI equivalence test (not a strict string comparison).
*
*/
boolean equals(in nsIURI other);
/**
* An optimization to do scheme checks without requiring the users of nsIURI
* to GetScheme, thereby saving extra allocating and freeing. Returns true if
* the schemes match (case ignored).
*/
[infallible] boolean schemeIs(in string scheme);
/**
* This method resolves a relative string into an absolute URI string,
* using this URI as the base.
*
* NOTE: some implementations may have no concept of a relative URI.
*/
AUTF8String resolve(in AUTF8String relativePath);
/************************************************************************
* Additional attributes:
*/
/**
* The URI spec with an ASCII compatible encoding. Host portion follows
* the IDNA draft spec. Other parts are URL-escaped per the rules of
* RFC2396. The result is strictly ASCII.
*/
readonly attribute ACString asciiSpec;
/**
* The host:port (or simply the host, if port == -1), with an ASCII compatible
* encoding. Host portion follows the IDNA draft spec. The result is strictly
* ASCII.
*/
readonly attribute ACString asciiHostPort;
/**
* The URI host with an ASCII compatible encoding. Follows the IDNA
* draft spec for converting internationalized domain names (UTF-8) to
* ASCII for compatibility with existing internet infrasture.
*/
readonly attribute ACString asciiHost;
/************************************************************************
* Additional attribute & methods added for .ref support:
*/
/**
* Returns the reference portion (the part after the "#") of the URI.
* If there isn't one, an empty string is returned.
*
* Some characters may be escaped.
*/
readonly attribute AUTF8String ref;
/**
* URI equivalence test (not a strict string comparison), ignoring
* the value of the .ref member.
*
*/
boolean equalsExceptRef(in nsIURI other);
/**
* returns a string for the current URI with the ref element cleared.
*/
readonly attribute AUTF8String specIgnoringRef;
/**
* Returns if there is a reference portion (the part after the "#") of the URI.
*/
readonly attribute boolean hasRef;
/**
* Returns if there is user and pass in the URI.
*/
readonly attribute boolean hasUserPass;
/************************************************************************
* Additional attributes added for .query support:
*/
/**
* Returns a path including the directory and file portions of a
* is "/foo/bar.html".
*
* Some characters may be escaped.
*/
readonly attribute AUTF8String filePath;
/**
* Returns the query portion (the part after the "?") of the URL.
* If there isn't one, an empty string is returned.
*
* Some characters may be escaped.
*/
readonly attribute AUTF8String query;
/**
* Returns if there is a query portion (the part after the "?") of the URI.
*/
readonly attribute boolean hasQuery;
/**
* Returns the host in a form suitable for display in the UI (with Punycode
* potentially decoded).
*/
readonly attribute AUTF8String displayHost;
/**
* The displayHost:port (or simply the displayHost, if port == -1).
*/
readonly attribute AUTF8String displayHostPort;
/**
* Returns the same as calling .spec, but with displayHost in the host position.
*/
readonly attribute AUTF8String displaySpec;
/**
* Returns the same as calling .prePath, but with displayHost in the host position.
*/
readonly attribute AUTF8String displayPrePath;
/**
* Returns an nsIURIMutator that can be used to make changes to the URI.
* After performing the setter operations on the mutator, one may call
* mutator.finalize() to get a new immutable URI with the desired
* properties.
*/
nsIURIMutator mutate();
/**
* Serializes a URI object to a URIParams data structure in order for being
* passed over IPC. For deserialization, see nsIURIMutator.
*/
[noscript, notxpcom] void serialize(in URIParams aParams);
%{C++
// MOZ_DBG support
friend std::ostream& operator<<(std::ostream& aOut, const nsIURI& aURI) {
nsIURI* uri = const_cast<nsIURI*>(&aURI);
return aOut << "nsIURI { " << uri->GetSpecOrDefault() << " }";
}
%}
};