Source code
Revision control
Copy as Markdown
Other Tools
/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
#include "SVGPathData.h"
#include "gfx2DGlue.h"
#include "gfxPlatform.h"
#include "mozilla/gfx/2D.h"
#include "mozilla/gfx/Types.h"
#include "mozilla/gfx/Point.h"
#include "mozilla/RefPtr.h"
#include "nsError.h"
#include "nsString.h"
#include "SVGArcConverter.h"
#include "nsStyleConsts.h"
#include "SVGContentUtils.h"
#include "SVGGeometryElement.h"
#include "SVGPathSegUtils.h"
#include <algorithm>
using namespace mozilla::gfx;
namespace mozilla {
nsresult SVGPathData::SetValueFromString(const nsACString& aValue) {
// We don't use a temp variable since the spec says to parse everything up to
// the first error. We still return any error though so that callers know if
// there's a problem.
bool ok = Servo_SVGPathData_Parse(&aValue, &mData);
return ok ? NS_OK : NS_ERROR_DOM_SYNTAX_ERR;
}
void SVGPathData::GetValueAsString(nsACString& aValue) const {
Servo_SVGPathData_ToString(&mData, &aValue);
}
bool SVGPathData::GetDistancesFromOriginToEndsOfVisibleSegments(
FallibleTArray<double>* aOutput) const {
return GetDistancesFromOriginToEndsOfVisibleSegments(AsSpan(), aOutput);
}
/* static */
bool SVGPathData::GetDistancesFromOriginToEndsOfVisibleSegments(
Span<const StylePathCommand> aPath, FallibleTArray<double>* aOutput) {
SVGPathTraversalState state;
aOutput->Clear();
bool firstMoveToIsChecked = false;
for (const auto& cmd : aPath) {
SVGPathSegUtils::TraversePathSegment(cmd, state);
if (!std::isfinite(state.length)) {
return false;
}
// We skip all moveto commands except for the initial moveto.
if (!cmd.IsMove() || !firstMoveToIsChecked) {
if (!aOutput->AppendElement(state.length, fallible)) {
return false;
}
}
if (cmd.IsMove() && !firstMoveToIsChecked) {
firstMoveToIsChecked = true;
}
}
return true;
}
/**
* The SVG spec says we have to paint stroke caps for zero length subpaths:
*
*
* Cairo only does this for |stroke-linecap: round| and not for
* |stroke-linecap: square| (since that's what Adobe Acrobat has always done).
* Most likely the other backends that DrawTarget uses have the same behavior.
*
* To help us conform to the SVG spec we have this helper function to draw an
* approximation of square caps for zero length subpaths. It does this by
* inserting a subpath containing a single user space axis aligned straight
* line that is as small as it can be while minimizing the risk of it being
* thrown away by the DrawTarget's backend for being too small to affect
* rendering. The idea is that we'll then get stroke caps drawn for this axis
* aligned line, creating an axis aligned rectangle that approximates the
* square that would ideally be drawn.
*
* Since we don't have any information about transforms from user space to
* device space, we choose the length of the small line that we insert by
* making it a small percentage of the stroke width of the path. This should
* hopefully allow us to make the line as long as possible (to avoid rounding
* issues in the backend resulting in the backend seeing it as having zero
* length) while still avoiding the small rectangle being noticeably different
* from a square.
*
* Note that this function inserts a subpath into the current gfx path that
* will be present during both fill and stroke operations.
*/
static void ApproximateZeroLengthSubpathSquareCaps(PathBuilder* aPB,
const Point& aPoint,
Float aStrokeWidth) {
// Note that caps are proportional to stroke width, so if stroke width is
// zero it's actually fine for |tinyLength| below to end up being zero.
// However, it would be a waste to inserting a LineTo in that case, so better
// not to.
MOZ_ASSERT(aStrokeWidth > 0.0f,
"Make the caller check for this, or check it here");
// The fraction of the stroke width that we choose for the length of the
// line is rather arbitrary, other than being chosen to meet the requirements
// described in the comment above.
Float tinyLength = aStrokeWidth / SVG_ZERO_LENGTH_PATH_FIX_FACTOR;
aPB->LineTo(aPoint + Point(tinyLength, 0));
aPB->MoveTo(aPoint);
}
#define MAYBE_APPROXIMATE_ZERO_LENGTH_SUBPATH_SQUARE_CAPS_TO_DT \
do { \
if (!subpathHasLength && hasLineCaps && aStrokeWidth > 0 && \
subpathContainsNonMoveTo && IsValidType(prevSegType) && \
(!IsMoveto(prevSegType) || IsClosePath(segType))) { \
ApproximateZeroLengthSubpathSquareCaps(aBuilder, segStart, \
aStrokeWidth); \
} \
} while (0)
already_AddRefed<Path> SVGPathData::BuildPath(PathBuilder* aBuilder,
StyleStrokeLinecap aStrokeLineCap,
Float aStrokeWidth,
float aZoom) const {
return BuildPath(AsSpan(), aBuilder, aStrokeLineCap, aStrokeWidth, {}, {},
aZoom);
}
#undef MAYBE_APPROXIMATE_ZERO_LENGTH_SUBPATH_SQUARE_CAPS_TO_DT
already_AddRefed<Path> SVGPathData::BuildPathForMeasuring(float aZoom) const {
// Since the path that we return will not be used for painting it doesn't
// matter what we pass to CreatePathBuilder as aFillRule. Hawever, we do want
// to pass something other than NS_STYLE_STROKE_LINECAP_SQUARE as
// aStrokeLineCap to avoid the insertion of extra little lines (by
// ApproximateZeroLengthSubpathSquareCaps), in which case the value that we
// pass as aStrokeWidth doesn't matter (since it's only used to determine the
// length of those extra little lines).
RefPtr<DrawTarget> drawTarget =
gfxPlatform::GetPlatform()->ScreenReferenceDrawTarget();
RefPtr<PathBuilder> builder =
drawTarget->CreatePathBuilder(FillRule::FILL_WINDING);
return BuildPath(builder, StyleStrokeLinecap::Butt, 0, aZoom);
}
/* static */
already_AddRefed<Path> SVGPathData::BuildPathForMeasuring(
Span<const StylePathCommand> aPath, float aZoom) {
RefPtr<DrawTarget> drawTarget =
gfxPlatform::GetPlatform()->ScreenReferenceDrawTarget();
RefPtr<PathBuilder> builder =
drawTarget->CreatePathBuilder(FillRule::FILL_WINDING);
return BuildPath(aPath, builder, StyleStrokeLinecap::Butt, 0, {}, {}, aZoom);
}
static inline StyleCSSFloat GetRotate(const StyleCSSFloat& aAngle) {
return aAngle;
}
static inline StyleCSSFloat GetRotate(const StyleAngle& aAngle) {
return aAngle.ToDegrees();
}
static inline StyleCSSFloat Resolve(const StyleCSSFloat& aValue,
CSSCoord aBasis) {
return aValue;
}
static inline StyleCSSFloat Resolve(const LengthPercentage& aValue,
CSSCoord aBasis) {
return aValue.ResolveToCSSPixels(aBasis);
}
template <typename Angle, typename LP>
static already_AddRefed<Path> BuildPathInternal(
Span<const StyleGenericShapeCommand<Angle, LP>> aPath,
PathBuilder* aBuilder, StyleStrokeLinecap aStrokeLineCap,
Float aStrokeWidth, const CSSSize& aPercentageBasis, const Point& aOffset,
float aZoomFactor) {
using Command = StyleGenericShapeCommand<Angle, LP>;
if (aPath.IsEmpty() || !aPath[0].IsMove()) {
return nullptr; // paths without an initial moveto are invalid
}
bool hasLineCaps = aStrokeLineCap != StyleStrokeLinecap::Butt;
bool subpathHasLength = false; // visual length
bool subpathContainsNonMoveTo = false;
const Command* seg = nullptr;
const Command* prevSeg = nullptr;
Point pathStart(0.0, 0.0); // start point of [sub]path
Point segStart(0.0, 0.0);
Point segEnd;
Point cp1, cp2; // previous bezier's control points
Point tcp1, tcp2; // temporaries
auto maybeApproximateZeroLengthSubpathSquareCaps =
[&](const Command* aPrevSeg, const Command* aSeg) {
if (!subpathHasLength && hasLineCaps && aStrokeWidth > 0 &&
subpathContainsNonMoveTo && aPrevSeg && aSeg &&
(!aPrevSeg->IsMove() || aSeg->IsClose())) {
ApproximateZeroLengthSubpathSquareCaps(aBuilder, segStart,
aStrokeWidth);
}
};
auto scale = [aOffset, aZoomFactor](const Point& p) {
return Point(p.x * aZoomFactor, p.y * aZoomFactor) + aOffset;
};
// Regarding cp1 and cp2: If the previous segment was a cubic bezier curve,
// then cp2 is its second control point. If the previous segment was a
// quadratic curve, then cp1 is its (only) control point.
for (const auto& cmd : aPath) {
seg = &cmd;
switch (cmd.tag) {
case Command::Tag::Close:
// set this early to allow drawing of square caps for "M{x},{y} Z":
subpathContainsNonMoveTo = true;
maybeApproximateZeroLengthSubpathSquareCaps(prevSeg, seg);
segEnd = pathStart;
aBuilder->Close();
break;
case Command::Tag::Move: {
maybeApproximateZeroLengthSubpathSquareCaps(prevSeg, seg);
const Point& p = cmd.move.point.ToGfxPoint(aPercentageBasis);
pathStart = segEnd = cmd.move.by_to == StyleByTo::To ? p : segStart + p;
aBuilder->MoveTo(scale(segEnd));
subpathHasLength = false;
break;
}
case Command::Tag::Line: {
const Point& p = cmd.line.point.ToGfxPoint(aPercentageBasis);
segEnd = cmd.line.by_to == StyleByTo::To ? p : segStart + p;
if (segEnd != segStart) {
subpathHasLength = true;
aBuilder->LineTo(scale(segEnd));
}
break;
}
case Command::Tag::CubicCurve:
cp1 = cmd.cubic_curve.control1.ToGfxPoint(aPercentageBasis);
cp2 = cmd.cubic_curve.control2.ToGfxPoint(aPercentageBasis);
segEnd = cmd.cubic_curve.point.ToGfxPoint(aPercentageBasis);
if (cmd.cubic_curve.by_to == StyleByTo::By) {
cp1 += segStart;
cp2 += segStart;
segEnd += segStart;
}
if (segEnd != segStart || segEnd != cp1 || segEnd != cp2) {
subpathHasLength = true;
aBuilder->BezierTo(scale(cp1), scale(cp2), scale(segEnd));
}
break;
case Command::Tag::QuadCurve:
cp1 = cmd.quad_curve.control1.ToGfxPoint(aPercentageBasis);
segEnd = cmd.quad_curve.point.ToGfxPoint(aPercentageBasis);
if (cmd.quad_curve.by_to == StyleByTo::By) {
cp1 += segStart;
segEnd += segStart; // set before setting tcp2!
}
// Convert quadratic curve to cubic curve:
tcp1 = segStart + (cp1 - segStart) * 2 / 3;
tcp2 = cp1 + (segEnd - cp1) / 3;
if (segEnd != segStart || segEnd != cp1) {
subpathHasLength = true;
aBuilder->BezierTo(scale(tcp1), scale(tcp2), scale(segEnd));
}
break;
case Command::Tag::Arc: {
const auto& arc = cmd.arc;
const Point& radii = arc.radii.ToGfxPoint(aPercentageBasis);
segEnd = arc.point.ToGfxPoint(aPercentageBasis);
if (arc.by_to == StyleByTo::By) {
segEnd += segStart;
}
if (segEnd != segStart) {
subpathHasLength = true;
if (radii.x == 0.0f || radii.y == 0.0f) {
aBuilder->LineTo(scale(segEnd));
} else {
const bool arc_is_large = arc.arc_size == StyleArcSize::Large;
const bool arc_is_cw = arc.arc_sweep == StyleArcSweep::Cw;
SVGArcConverter converter(segStart, segEnd, radii,
GetRotate(arc.rotate), arc_is_large,
arc_is_cw);
while (converter.GetNextSegment(&cp1, &cp2, &segEnd)) {
aBuilder->BezierTo(scale(cp1), scale(cp2), scale(segEnd));
}
}
}
break;
}
case Command::Tag::HLine: {
const float x = Resolve(cmd.h_line.x, aPercentageBasis.width);
if (cmd.h_line.by_to == StyleByTo::To) {
segEnd = Point(x, segStart.y);
} else {
segEnd = segStart + Point(x, 0.0f);
}
if (segEnd != segStart) {
subpathHasLength = true;
aBuilder->LineTo(scale(segEnd));
}
break;
}
case Command::Tag::VLine: {
const float y = Resolve(cmd.v_line.y, aPercentageBasis.height);
if (cmd.v_line.by_to == StyleByTo::To) {
segEnd = Point(segStart.x, y);
} else {
segEnd = segStart + Point(0.0f, y);
}
if (segEnd != segStart) {
subpathHasLength = true;
aBuilder->LineTo(scale(segEnd));
}
break;
}
case Command::Tag::SmoothCubic:
cp1 = prevSeg && prevSeg->IsCubicType() ? segStart * 2 - cp2 : segStart;
cp2 = cmd.smooth_cubic.control2.ToGfxPoint(aPercentageBasis);
segEnd = cmd.smooth_cubic.point.ToGfxPoint(aPercentageBasis);
if (cmd.smooth_cubic.by_to == StyleByTo::By) {
cp2 += segStart;
segEnd += segStart;
}
if (segEnd != segStart || segEnd != cp1 || segEnd != cp2) {
subpathHasLength = true;
aBuilder->BezierTo(scale(cp1), scale(cp2), scale(segEnd));
}
break;
case Command::Tag::SmoothQuad: {
cp1 = prevSeg && prevSeg->IsQuadraticType() ? segStart * 2 - cp1
: segStart;
// Convert quadratic curve to cubic curve:
tcp1 = segStart + (cp1 - segStart) * 2 / 3;
const Point& p = cmd.smooth_quad.point.ToGfxPoint(aPercentageBasis);
// set before setting tcp2!
segEnd = cmd.smooth_quad.by_to == StyleByTo::To ? p : segStart + p;
tcp2 = cp1 + (segEnd - cp1) / 3;
if (segEnd != segStart || segEnd != cp1) {
subpathHasLength = true;
aBuilder->BezierTo(scale(tcp1), scale(tcp2), scale(segEnd));
}
break;
}
}
subpathContainsNonMoveTo = !cmd.IsMove();
prevSeg = seg;
segStart = segEnd;
}
MOZ_ASSERT(prevSeg == seg, "prevSegType should be left at the final segType");
maybeApproximateZeroLengthSubpathSquareCaps(prevSeg, seg);
return aBuilder->Finish();
}
/* static */
already_AddRefed<Path> SVGPathData::BuildPath(
Span<const StylePathCommand> aPath, PathBuilder* aBuilder,
StyleStrokeLinecap aStrokeLineCap, Float aStrokeWidth,
const CSSSize& aBasis, const gfx::Point& aOffset, float aZoomFactor) {
return BuildPathInternal(aPath, aBuilder, aStrokeLineCap, aStrokeWidth,
aBasis, aOffset, aZoomFactor);
}
/* static */
already_AddRefed<Path> SVGPathData::BuildPath(
Span<const StyleShapeCommand> aShape, PathBuilder* aBuilder,
StyleStrokeLinecap aStrokeLineCap, Float aStrokeWidth,
const CSSSize& aBasis, const gfx::Point& aOffset, float aZoomFactor) {
return BuildPathInternal(aShape, aBuilder, aStrokeLineCap, aStrokeWidth,
aBasis, aOffset, aZoomFactor);
}
static double AngleOfVector(const Point& aVector) {
// C99 says about atan2 "A domain error may occur if both arguments are
// zero" and "On a domain error, the function returns an implementation-
// defined value". In the case of atan2 the implementation-defined value
// seems to commonly be zero, but it could just as easily be a NaN value.
// We specifically want zero in this case, hence the check:
return (aVector != Point(0.0, 0.0)) ? atan2(aVector.y, aVector.x) : 0.0;
}
static float AngleOfVector(const Point& cp1, const Point& cp2) {
return static_cast<float>(AngleOfVector(cp1 - cp2));
}
// This implements F.6.5 and F.6.6 of
static std::tuple<float, float, float, float>
/* rx, ry, segStartAngle, segEndAngle */
ComputeSegAnglesAndCorrectRadii(const Point& aSegStart, const Point& aSegEnd,
const float aAngle, const bool aLargeArcFlag,
const bool aSweepFlag, const float aRx,
const float aRy) {
float rx = fabs(aRx); // F.6.6.1
float ry = fabs(aRy);
// F.6.5.1:
const float angle = static_cast<float>(aAngle * M_PI / 180.0);
double x1p = cos(angle) * (aSegStart.x - aSegEnd.x) / 2.0 +
sin(angle) * (aSegStart.y - aSegEnd.y) / 2.0;
double y1p = -sin(angle) * (aSegStart.x - aSegEnd.x) / 2.0 +
cos(angle) * (aSegStart.y - aSegEnd.y) / 2.0;
// This is the root in F.6.5.2 and the numerator under that root:
double root;
double numerator =
rx * rx * ry * ry - rx * rx * y1p * y1p - ry * ry * x1p * x1p;
if (numerator >= 0.0) {
root = sqrt(numerator / (rx * rx * y1p * y1p + ry * ry * x1p * x1p));
if (aLargeArcFlag == aSweepFlag) root = -root;
} else {
// F.6.6 step 3 - |numerator < 0.0|. This is equivalent to the result
// of F.6.6.2 (lamedh) being greater than one. What we have here is
// ellipse radii that are too small for the ellipse to reach between
// segStart and segEnd. We scale the radii up uniformly so that the
// ellipse is just big enough to fit (i.e. to the point where there is
// exactly one solution).
double lamedh =
1.0 - numerator / (rx * rx * ry * ry); // equiv to eqn F.6.6.2
double s = sqrt(lamedh);
rx = static_cast<float>((double)rx * s); // F.6.6.3
ry = static_cast<float>((double)ry * s);
root = 0.0;
}
double cxp = root * rx * y1p / ry; // F.6.5.2
double cyp = -root * ry * x1p / rx;
double theta =
AngleOfVector(Point(static_cast<float>((x1p - cxp) / rx),
static_cast<float>((y1p - cyp) / ry))); // F.6.5.5
double delta =
AngleOfVector(Point(static_cast<float>((-x1p - cxp) / rx),
static_cast<float>((-y1p - cyp) / ry))) - // F.6.5.6
theta;
if (!aSweepFlag && delta > 0) {
delta -= 2.0 * M_PI;
} else if (aSweepFlag && delta < 0) {
delta += 2.0 * M_PI;
}
double tx1, ty1, tx2, ty2;
tx1 = -cos(angle) * rx * sin(theta) - sin(angle) * ry * cos(theta);
ty1 = -sin(angle) * rx * sin(theta) + cos(angle) * ry * cos(theta);
tx2 = -cos(angle) * rx * sin(theta + delta) -
sin(angle) * ry * cos(theta + delta);
ty2 = -sin(angle) * rx * sin(theta + delta) +
cos(angle) * ry * cos(theta + delta);
if (delta < 0.0f) {
tx1 = -tx1;
ty1 = -ty1;
tx2 = -tx2;
ty2 = -ty2;
}
return {rx, ry, static_cast<float>(atan2(ty1, tx1)),
static_cast<float>(atan2(ty2, tx2))};
}
void SVGPathData::GetMarkerPositioningData(float aZoom,
nsTArray<SVGMark>* aMarks) const {
return GetMarkerPositioningData(AsSpan(), aZoom, aMarks);
}
// Basically, this is identical to the above function, but replace |mData| with
// |aPath|. We probably can factor out some identical calculation, but I believe
// the above one will be removed because we will use any kind of array of
// StylePathCommand for SVG d attribute in the future.
/* static */
void SVGPathData::GetMarkerPositioningData(Span<const StylePathCommand> aPath,
float aZoom,
nsTArray<SVGMark>* aMarks) {
if (aPath.IsEmpty()) {
return;
}
// info on current [sub]path (reset every M command):
Point pathStart(0.0, 0.0);
float pathStartAngle = 0.0f;
uint32_t pathStartIndex = 0;
// info on previous segment:
const StylePathCommand* prevSeg = nullptr;
Point prevSegEnd(0.0, 0.0);
float prevSegEndAngle = 0.0f;
Point prevCP; // if prev seg was a bezier, this was its last control point
for (const StylePathCommand& cmd : aPath) {
Point& segStart = prevSegEnd;
Point segEnd;
float segStartAngle, segEndAngle;
switch (cmd.tag) // to find segStartAngle, segEnd and segEndAngle
{
case StylePathCommand::Tag::Close:
segEnd = pathStart;
segStartAngle = segEndAngle = AngleOfVector(segEnd, segStart);
break;
case StylePathCommand::Tag::Move: {
const Point& p = cmd.move.point.ToGfxPoint() * aZoom;
pathStart = segEnd = cmd.move.by_to == StyleByTo::To ? p : segStart + p;
pathStartIndex = aMarks->Length();
// If authors are going to specify multiple consecutive moveto commands
// with markers, me might as well make the angle do something useful:
segStartAngle = segEndAngle = AngleOfVector(segEnd, segStart);
break;
}
case StylePathCommand::Tag::Line: {
const Point& p = cmd.line.point.ToGfxPoint() * aZoom;
segEnd = cmd.line.by_to == StyleByTo::To ? p : segStart + p;
segStartAngle = segEndAngle = AngleOfVector(segEnd, segStart);
break;
}
case StylePathCommand::Tag::CubicCurve: {
Point cp1 = cmd.cubic_curve.control1.ToGfxPoint() * aZoom;
Point cp2 = cmd.cubic_curve.control2.ToGfxPoint() * aZoom;
segEnd = cmd.cubic_curve.point.ToGfxPoint() * aZoom;
if (cmd.cubic_curve.by_to == StyleByTo::By) {
cp1 += segStart;
cp2 += segStart;
segEnd += segStart;
}
prevCP = cp2;
segStartAngle = AngleOfVector(
cp1 == segStart ? (cp1 == cp2 ? segEnd : cp2) : cp1, segStart);
segEndAngle = AngleOfVector(
segEnd, cp2 == segEnd ? (cp1 == cp2 ? segStart : cp1) : cp2);
break;
}
case StylePathCommand::Tag::QuadCurve: {
Point cp1 = cmd.quad_curve.control1.ToGfxPoint() * aZoom;
segEnd = cmd.quad_curve.point.ToGfxPoint() * aZoom;
if (cmd.quad_curve.by_to == StyleByTo::By) {
cp1 += segStart;
segEnd += segStart; // set before setting tcp2!
}
prevCP = cp1;
segStartAngle = AngleOfVector(cp1 == segStart ? segEnd : cp1, segStart);
segEndAngle = AngleOfVector(segEnd, cp1 == segEnd ? segStart : cp1);
break;
}
case StylePathCommand::Tag::Arc: {
const auto& arc = cmd.arc;
float rx = arc.radii.x * aZoom;
float ry = arc.radii.y * aZoom;
float angle = arc.rotate;
bool largeArcFlag = arc.arc_size == StyleArcSize::Large;
bool sweepFlag = arc.arc_sweep == StyleArcSweep::Cw;
segEnd = arc.point.ToGfxPoint() * aZoom;
if (arc.by_to == StyleByTo::By) {
segEnd += segStart;
}
// See section F.6 of SVG 1.1 for details on what we're doing here:
if (segStart == segEnd) {
// F.6.2 says "If the endpoints (x1, y1) and (x2, y2) are identical,
// then this is equivalent to omitting the elliptical arc segment
// entirely." We take that very literally here, not adding a mark, and
// not even setting any of the 'prev' variables so that it's as if
// this arc had never existed; note the difference this will make e.g.
// if the arc is proceeded by a bezier curve and followed by a
// "smooth" bezier curve of the same degree!
continue;
}
// Below we have funny interleaving of F.6.6 (Correction of out-of-range
// radii) and F.6.5 (Conversion from endpoint to center
// parameterization) which is designed to avoid some unnecessary
// calculations.
if (rx == 0.0 || ry == 0.0) {
// F.6.6 step 1 - straight line or coincidental points
segStartAngle = segEndAngle = AngleOfVector(segEnd, segStart);
break;
}
std::tie(rx, ry, segStartAngle, segEndAngle) =
ComputeSegAnglesAndCorrectRadii(segStart, segEnd, angle,
largeArcFlag, sweepFlag, rx, ry);
break;
}
case StylePathCommand::Tag::HLine: {
if (cmd.h_line.by_to == StyleByTo::To) {
segEnd = Point(cmd.h_line.x, segStart.y) * aZoom;
} else {
segEnd = segStart + Point(cmd.h_line.x, 0.0f) * aZoom;
}
segStartAngle = segEndAngle = AngleOfVector(segEnd, segStart);
break;
}
case StylePathCommand::Tag::VLine: {
if (cmd.v_line.by_to == StyleByTo::To) {
segEnd = Point(segStart.x, cmd.v_line.y) * aZoom;
} else {
segEnd = segStart + Point(0.0f, cmd.v_line.y) * aZoom;
}
segStartAngle = segEndAngle = AngleOfVector(segEnd, segStart);
break;
}
case StylePathCommand::Tag::SmoothCubic: {
const Point& cp1 = prevSeg && prevSeg->IsCubicType()
? segStart * 2 - prevCP
: segStart;
Point cp2 = cmd.smooth_cubic.control2.ToGfxPoint() * aZoom;
segEnd = cmd.smooth_cubic.point.ToGfxPoint() * aZoom;
if (cmd.smooth_cubic.by_to == StyleByTo::By) {
cp2 += segStart;
segEnd += segStart;
}
prevCP = cp2;
segStartAngle = AngleOfVector(
cp1 == segStart ? (cp1 == cp2 ? segEnd : cp2) : cp1, segStart);
segEndAngle = AngleOfVector(
segEnd, cp2 == segEnd ? (cp1 == cp2 ? segStart : cp1) : cp2);
break;
}
case StylePathCommand::Tag::SmoothQuad: {
const Point& cp1 = prevSeg && prevSeg->IsQuadraticType()
? segStart * 2 - prevCP
: segStart;
segEnd = cmd.smooth_quad.by_to == StyleByTo::To
? cmd.smooth_quad.point.ToGfxPoint() * aZoom
: segStart + cmd.smooth_quad.point.ToGfxPoint() * aZoom;
prevCP = cp1;
segStartAngle = AngleOfVector(cp1 == segStart ? segEnd : cp1, segStart);
segEndAngle = AngleOfVector(segEnd, cp1 == segEnd ? segStart : cp1);
break;
}
}
// Set the angle of the mark at the start of this segment:
if (aMarks->Length()) {
SVGMark& mark = aMarks->LastElement();
if (!cmd.IsMove() && prevSeg && prevSeg->IsMove()) {
// start of new subpath
pathStartAngle = mark.angle = segStartAngle;
} else if (cmd.IsMove() && !(prevSeg && prevSeg->IsMove())) {
// end of a subpath
if (!(prevSeg && prevSeg->IsClose())) {
mark.angle = prevSegEndAngle;
}
} else if (!(cmd.IsClose() && prevSeg && prevSeg->IsClose())) {
mark.angle =
SVGContentUtils::AngleBisect(prevSegEndAngle, segStartAngle);
}
}
// Add the mark at the end of this segment, and set its position:
// pretended earlier.
aMarks->AppendElement(SVGMark(static_cast<float>(segEnd.x),
static_cast<float>(segEnd.y), 0.0f,
SVGMark::eMid));
if (cmd.IsClose() && !(prevSeg && prevSeg->IsClose())) {
aMarks->LastElement().angle = aMarks->ElementAt(pathStartIndex).angle =
SVGContentUtils::AngleBisect(segEndAngle, pathStartAngle);
}
prevSeg = &cmd;
prevSegEnd = segEnd;
prevSegEndAngle = segEndAngle;
}
if (!aMarks->IsEmpty()) {
if (!(prevSeg && prevSeg->IsClose())) {
aMarks->LastElement().angle = prevSegEndAngle;
}
aMarks->LastElement().type = SVGMark::eEnd;
aMarks->ElementAt(0).type = SVGMark::eStart;
}
}
size_t SVGPathData::SizeOfExcludingThis(MallocSizeOf aMallocSizeOf) const {
// TODO: measure mData if unshared?
return 0;
}
size_t SVGPathData::SizeOfIncludingThis(MallocSizeOf aMallocSizeOf) const {
return aMallocSizeOf(this) + SizeOfExcludingThis(aMallocSizeOf);
}
} // namespace mozilla