Source code
Revision control
Copy as Markdown
Other Tools
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim:set ts=2 sw=2 sts=2 et cindent: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
#include "AudioTrimmer.h"
#define LOG(arg, ...) \
DDMOZ_LOG(sPDMLog, mozilla::LogLevel::Debug, "::%s: " arg, __func__, \
##__VA_ARGS__)
#define LOGV(arg, ...) \
DDMOZ_LOG(sPDMLog, mozilla::LogLevel::Verbose, "::%s: " arg, __func__, \
##__VA_ARGS__)
namespace mozilla {
using media::TimeInterval;
using media::TimeUnit;
RefPtr<MediaDataDecoder::InitPromise> AudioTrimmer::Init() {
mThread = GetCurrentSerialEventTarget();
return mDecoder->Init();
}
RefPtr<MediaDataDecoder::DecodePromise> AudioTrimmer::Decode(
MediaRawData* aSample) {
MOZ_ASSERT(mThread->IsOnCurrentThread(),
"We're not on the thread we were first initialized on");
LOG("AudioTrimmer::Decode");
PrepareTrimmers(aSample);
RefPtr<AudioTrimmer> self = this;
RefPtr<DecodePromise> p = mDecoder->Decode(aSample)->Then(
GetCurrentSerialEventTarget(), __func__,
[self](DecodePromise::ResolveOrRejectValue&& aValue) {
return self->HandleDecodedResult(std::move(aValue));
});
return p;
}
RefPtr<MediaDataDecoder::FlushPromise> AudioTrimmer::Flush() {
MOZ_ASSERT(mThread->IsOnCurrentThread(),
"We're not on the thread we were first initialized on");
LOG("Flushing");
RefPtr<FlushPromise> p = mDecoder->Flush();
mTrimmers.Clear();
return p;
}
RefPtr<MediaDataDecoder::DecodePromise> AudioTrimmer::Drain() {
MOZ_ASSERT(mThread->IsOnCurrentThread(),
"We're not on the thread we were first initialized on");
LOG("Draining");
RefPtr<DecodePromise> p = mDecoder->Drain()->Then(
GetCurrentSerialEventTarget(), __func__,
[self = RefPtr{this}](DecodePromise::ResolveOrRejectValue&& aValue) {
return self->HandleDecodedResult(std::move(aValue));
});
return p;
}
RefPtr<ShutdownPromise> AudioTrimmer::Shutdown() {
// mThread may not be set if Init hasn't been called first.
MOZ_ASSERT(!mThread || mThread->IsOnCurrentThread());
return mDecoder->Shutdown();
}
nsCString AudioTrimmer::GetDescriptionName() const {
return mDecoder->GetDescriptionName();
}
nsCString AudioTrimmer::GetProcessName() const {
return mDecoder->GetProcessName();
}
nsCString AudioTrimmer::GetCodecName() const {
return mDecoder->GetCodecName();
}
bool AudioTrimmer::IsHardwareAccelerated(nsACString& aFailureReason) const {
return mDecoder->IsHardwareAccelerated(aFailureReason);
}
void AudioTrimmer::SetSeekThreshold(const media::TimeUnit& aTime) {
mDecoder->SetSeekThreshold(aTime);
}
bool AudioTrimmer::SupportDecoderRecycling() const {
return mDecoder->SupportDecoderRecycling();
}
bool AudioTrimmer::ShouldDecoderAlwaysBeRecycled() const {
return mDecoder->ShouldDecoderAlwaysBeRecycled();
}
MediaDataDecoder::ConversionRequired AudioTrimmer::NeedsConversion() const {
return mDecoder->NeedsConversion();
}
RefPtr<MediaDataDecoder::DecodePromise> AudioTrimmer::HandleDecodedResult(
DecodePromise::ResolveOrRejectValue&& aValue) {
MOZ_ASSERT(mThread->IsOnCurrentThread(),
"We're not on the thread we were first initialized on");
if (aValue.IsReject()) {
return DecodePromise::CreateAndReject(std::move(aValue.RejectValue()),
__func__);
}
MediaDataDecoder::DecodedData results = std::move(aValue.ResolveValue());
LOG("HandleDecodedResults: %zu decoded data, %zu trimmers", results.Length(),
mTrimmers.Length());
if (results.IsEmpty()) {
// No samples returned, we assume this is due to the latency of the
// decoder and that the related decoded sample will be returned during
// the next call to Decode().
LOGV("No sample returned -- decoder has latency");
return DecodePromise::CreateAndResolve(std::move(results), __func__);
}
for (uint32_t i = 0; i < results.Length();) {
const RefPtr<MediaData>& data = results[i];
MOZ_ASSERT(data->mType == MediaData::Type::AUDIO_DATA);
if (!data->mDuration.IsValid()) {
return DecodePromise::CreateAndReject(std::move(aValue.RejectValue()),
__func__);
}
TimeInterval sampleInterval(data->mTime, data->GetEndTime());
if (mTrimmers.IsEmpty()) {
// mTrimmers being empty can only occurs if the decoder returned more
// frames than we pushed in. We can't handle this case, abort trimming.
LOG("decoded buffer [%s, %s] has no trimming information)",
sampleInterval.mStart.ToString().get(),
sampleInterval.mEnd.ToString().get());
i++;
continue;
}
Maybe<TimeInterval> trimmer = mTrimmers[0];
mTrimmers.RemoveElementAt(0);
if (!trimmer) {
// Those frames didn't need trimming.
LOGV("decoded buffer [%s, %s] doesn't need trimming",
sampleInterval.mStart.ToString().get(),
sampleInterval.mEnd.ToString().get());
i++;
continue;
}
if (!trimmer->Intersects(sampleInterval)) {
LOGV("decoded buffer [%s, %s] would be empty after trimming, dropping it",
sampleInterval.mStart.ToString().get(),
sampleInterval.mEnd.ToString().get());
results.RemoveElementAt(i);
continue;
}
LOGV("Trimming sample[%s,%s] to [%s,%s]",
sampleInterval.mStart.ToString().get(),
sampleInterval.mEnd.ToString().get(), trimmer->mStart.ToString().get(),
trimmer->mEnd.ToString().get());
TimeInterval trim({std::max(trimmer->mStart, sampleInterval.mStart),
std::min(trimmer->mEnd, sampleInterval.mEnd)});
AudioData* sample = static_cast<AudioData*>(data.get());
bool ok = sample->SetTrimWindow(trim);
NS_ASSERTION(ok, "Trimming of audio sample failed");
Unused << ok;
if (sample->Frames() == 0) {
LOGV("sample[%s, %s] is empty after trimming, dropping it",
sampleInterval.mStart.ToString().get(),
sampleInterval.mEnd.ToString().get());
results.RemoveElementAt(i);
continue;
}
i++;
}
return DecodePromise::CreateAndResolve(std::move(results), __func__);
}
RefPtr<MediaDataDecoder::DecodePromise> AudioTrimmer::DecodeBatch(
nsTArray<RefPtr<MediaRawData>>&& aSamples) {
MOZ_ASSERT(mThread->IsOnCurrentThread(),
"We're not on the thread we were first initialized on");
LOGV("DecodeBatch");
for (auto&& sample : aSamples) {
PrepareTrimmers(sample);
}
RefPtr<DecodePromise> p =
mDecoder->DecodeBatch(std::move(aSamples))
->Then(GetCurrentSerialEventTarget(), __func__,
[self = RefPtr{this}](
DecodePromise::ResolveOrRejectValue&& aValue) {
return self->HandleDecodedResult(std::move(aValue));
});
return p;
}
void AudioTrimmer::PrepareTrimmers(MediaRawData* aRaw) {
// A compress sample indicates that it needs to be trimmed after decoding by
// having its mOriginalPresentationWindow member set; in which case
// mOriginalPresentationWindow contains the original time and duration of
// the frame set by the demuxer and mTime and mDuration set to what it
// should be after trimming.
if (aRaw->mOriginalPresentationWindow) {
LOGV("sample[%s, %s] has trimming info ([%s, %s]",
aRaw->mOriginalPresentationWindow->mStart.ToString().get(),
aRaw->mOriginalPresentationWindow->mEnd.ToString().get(),
aRaw->mTime.ToString().get(), aRaw->GetEndTime().ToString().get());
mTrimmers.AppendElement(
Some(TimeInterval(aRaw->mTime, aRaw->GetEndTime())));
aRaw->mTime = aRaw->mOriginalPresentationWindow->mStart;
aRaw->mDuration = aRaw->mOriginalPresentationWindow->Length();
} else {
LOGV("sample[%s,%s] no trimming information", aRaw->mTime.ToString().get(),
aRaw->GetEndTime().ToString().get());
mTrimmers.AppendElement(Nothing());
}
}
} // namespace mozilla
#undef LOG