Source code
Revision control
Copy as Markdown
Other Tools
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
#include "nsISupports.idl"
#include "nsIVariant.idl"
#include "nsIPaymentAddress.idl"
/**
* The base interface of response data for the specified payment method.
* The response data is the content of the PaymentResponse's detail attribute.
*/
[builtinclass, scriptable, uuid(2a338575-c688-40ee-a157-7488ab292ef2)]
interface nsIPaymentResponseData: nsISupports
{
/**
* The consts for representing the response data type.
* GENERAL_RESPONSE is the general purpose response data type. Except basic
* card response data, all response data should belong to this type.
* BASICCARD_RESPONSE is a special response data type for basic card response.
*/
const uint32_t GENERAL_RESPONSE = 0;
const uint32_t BASICCARD_RESPONSE = 1;
/**
* The response data type.
* Using the above defined consts(GENERAL_RESPONSE or BASICCARD_RESPONSE).
*/
readonly attribute uint32_t type;
/**
* The initial method.
* @param aType - the response data type.
*/
void init(in uint32_t aType);
};
/**
* The general purpose response data.
*/
[builtinclass, scriptable, uuid(b986773e-2b30-4ed2-b8fe-6a96631c8000)]
interface nsIGeneralResponseData : nsIPaymentResponseData
{
/**
* The stringified response data.
*/
readonly attribute AString data;
/**
* The initial method for nsIGeneralResponseData.
* @param aData - the javascript object of the content.
*/
[implicit_jscontext]
void initData(in jsval aData);
};
/**
* The basic card response data.
* Since PaymentAddress is an no constructor interface type, UI code can not
* easy create PaymentAddress by calling new PaymentAddress().
* Unfortunately, BasicCardResponse has a PaymentAddress attribute, billingAddress
* , it means UI can not create BsaicCardResponse by calling the init() with a
* given JSObject directly, because PaymentAddress creation in JS code is hard.
* To let UI code can create BasicCardResponse easier, nsIBasicCardResponse is
* provided for UI by passing the raw data of BasicCardResponse,
*/
[builtinclass, scriptable, uuid(0d55a5e6-d185-44f0-b992-a8e1321e4bce)]
interface nsIBasicCardResponseData : nsIPaymentResponseData
{
/**
* The cardholder name.
*/
readonly attribute AString cardholderName;
/**
* The card number.
*/
readonly attribute AString cardNumber;
/**
* The expiry month.
*/
readonly attribute AString expiryMonth;
/**
* The expiry year.
*/
readonly attribute AString expiryYear;
/**
* The card security number.
*/
readonly attribute AString cardSecurityCode;
/**
* The billing address.
*/
readonly attribute nsIPaymentAddress billingAddress;
/**
* The initial method for nsIBasicCardResponseData.
* @param aCardholderName - the cardholder name.
* @param aCardNumber - the card number.
* @param aExpiryMonth - the expiry month.
* @param aExpiryYear - the expiry year.
* @param aCardSecurityCode - the card security code.
* @param aBillingAddreess - the billing address.
*/
void initData(in AString aCardholderName,
in AString aCardNumber,
in AString aExpiryMonth,
in AString aExpiryYear,
in AString aCardSecurityCode,
in nsIPaymentAddress billingAddress);
};
/**
* The base interface of user's response.
* Payment UI should create different sub-interface of nsIPaymentActionResponse
* according to user's action, and call nsIPaymentRequestService::respondPayment
* with the created action to inform the merchant.
*/
[builtinclass, scriptable, uuid(a607c095-ef60-4a9b-a3d0-0506c60728b3)]
interface nsIPaymentActionResponse : nsISupports
{
/**
* The response type.
* Align type to nsIPaymentActionRequest types,
* where 1 is for payment request creation.
* the action expects no response from UI module.
*/
const uint32_t NO_TYPE = 0;
// const uint32_t CREATE_ACTION = 1;
const uint32_t CANMAKE_ACTION = 2;
const uint32_t SHOW_ACTION = 3;
const uint32_t ABORT_ACTION = 4;
const uint32_t COMPLETE_ACTION = 5;
/**
* The abort status.
*/
const uint32_t ABORT_SUCCEEDED = 1;
const uint32_t ABORT_FAILED = 0;
/**
* The payment status.
*/
const uint32_t PAYMENT_REJECTED = 0;
const uint32_t PAYMENT_ACCEPTED = 1;
const uint32_t PAYMENT_NOTSUPPORTED = 2;
/**
* The complete status.
*/
const uint32_t COMPLETE_SUCCEEDED = 1;
const uint32_t COMPLETE_FAILED = 0;
/*
* The payment request identity.
*/
readonly attribute AString requestId;
/*
* The response type.
*/
readonly attribute uint32_t type;
};
/**
* The response for canMakePayment action.
*/
[builtinclass, scriptable, uuid(52fc3f9f-c0cb-4874-b3d4-ee4b6e9cbe9c)]
interface nsIPaymentCanMakeActionResponse : nsIPaymentActionResponse
{
/**
* The result of canMakePayment action.
*/
readonly attribute boolean result;
/**
* The initial method.
* @param aRequestId - the request identifier of the payment request.
* @param aResult - the canMakePayment result.
*/
void init(in AString aRequestId, in boolean aResult);
};
/**
* The response for show action.
* Notice that to represent user's cancel, we should use nsIPaymentShowActionResponse
* with PAYMENT_REJECTED status, not nsIPaymentAbortActionResponse.
*/
[builtinclass, scriptable, uuid(184385cb-2d35-4b99-a9a3-7c780bf66b9b)]
interface nsIPaymentShowActionResponse : nsIPaymentActionResponse
{
/**
* Accept status of the payment.
* Using the defined consts(PAYMENT_XXX) in nsIPaymentActionResponse.
*/
readonly attribute uint32_t acceptStatus;
/**
* The decided payment method name. i.e. "basic-card".
*/
readonly attribute AString methodName;
/**
* The data needed by the payment method. (it must be serializable)
*/
readonly attribute nsIPaymentResponseData data;
/**
* The payer name information.
*/
readonly attribute AString payerName;
/**
* The payer email information.
*/
readonly attribute AString payerEmail;
/**
* The payer phone information.
*/
readonly attribute AString payerPhone;
/**
* The initial method.
* @param aRequestId - the request identifier of the payment request.
* @param aAcceptStatus - the payment status.
* @param aMethodName - the decided method name.
* @param aData - the response data for the decided payment method.
* @param aPayerName - the payer's name.
* @param aPayerEmail - the payer's email.
* @param aPayerPhone - the payer's phone.
*/
void init(in AString aRequestId,
in uint32_t aAcceptStatus,
in AString aMethodName,
in nsIPaymentResponseData aData,
in AString aPayerName,
in AString aPayerEmail,
in AString aPayerPhone);
};
/**
* The response for abort action.
*/
[builtinclass, scriptable, uuid(8c72bcdb-0c37-4786-a9e5-510afa2f8ede)]
interface nsIPaymentAbortActionResponse : nsIPaymentActionResponse
{
/**
* The abort action status.
* Using the defined consts(ABORT_XXX) in nsIPaymentActionResponse.
*/
readonly attribute uint32_t abortStatus;
/**
* The Initial method.
* @param aRequestId - the request identifier of payment request.
* @param aAbortStatus - the abort action result.
*/
void init(in AString aRequestId, in uint32_t aAbortStatus);
/**
* Check if the abort action is succeeded
*/
boolean isSucceeded();
};
[builtinclass, scriptable, uuid(62c01e69-9ca4-4060-99e4-b95f628c8e6d)]
interface nsIPaymentCompleteActionResponse : nsIPaymentActionResponse
{
/**
* The complete action status.
* Using the defined consts(COMPLETE_XXX) in nsIPaymentActionResponse.
*/
readonly attribute uint32_t completeStatus;
/**
* The Initial method.
* @param aRequestId - the request identifier of payment request.
* @param aCompleteStatus - the complete action result.
*/
void init(in AString aRequestId,
in uint32_t aCompleteStatus);
/**
* Check if the complete action is succeeded.
*/
boolean isCompleted();
};
[builtinclass, scriptable, uuid(2035e0a9-c9ab-4c9f-b8e9-28b2ed61548c)]
interface nsIMethodChangeDetails : nsISupports
{
/**
* The consts for representing the method change details data type.
* GENERAL_DETAILS is the general purpose details data type. Except basic
* card details, all details should belong to this type.
* BASICCARD_DETAILS is a special details data type for basic card change
* details.
*/
const uint32_t GENERAL_DETAILS = 0;
const uint32_t BASICCARD_DETAILS = 1;
/**
* The method change details data type.
* Using the above defined consts(GENERAL_DETAILS or BASICCARD_DETAILS).
*/
readonly attribute uint32_t type;
/**
* The initial method.
* @param aType - the method change details data type.
*/
void init(in uint32_t aType);
};
/**
* The general purpose method change details.
*/
[builtinclass, scriptable, uuid(e031267e-bec8-4f3c-b0b1-396b77ca260c)]
interface nsIGeneralChangeDetails : nsIMethodChangeDetails
{
/**
* The stringified change details.
*/
readonly attribute AString details;
/**
* The initial method for nsIGeneralChangeDetails.
* @param aData - the javascript object of the content.
*/
[implicit_jscontext]
void initData(in jsval aDetails);
};
/**
* The basic card change details.
* Since PaymentAddress is an no constructor interface type, UI code can not
* easy create PaymentAddress by calling new PaymentAddress().
* Unfortunately, BasicCardResponse has a PaymentAddress attribute, billingAddress
* , it means UI can not create BsaicCardChangeDetails by calling the init() with a
* given JSObject directly, because PaymentAddress creation in JS code is hard.
* To let UI code can create BasicCardResponse easier, nsIBasicCardResponse is
* provided for UI by passing the raw data of BasicCardResponse,
*/
[builtinclass, scriptable, uuid(5296f79e-15ea-40c3-8196-19cfa64d328c)]
interface nsIBasicCardChangeDetails : nsIMethodChangeDetails
{
/**
* The billing address.
*/
readonly attribute nsIPaymentAddress billingAddress;
/**
* The initial method for nsIBasicCardChangeDetails.
* @param aBillingAddreess - the billing address.
*/
void initData(in nsIPaymentAddress billingAddress);
};
%{C++
#define NS_PAYMENT_CANMAKE_ACTION_RESPONSE_CONTRACT_ID \
"@mozilla.org/dom/payments/payment-canmake-action-response;1"
#define NS_PAYMENT_SHOW_ACTION_RESPONSE_CONTRACT_ID \
"@mozilla.org/dom/payments/payment-show-action-response;1"
%}