dmd.md - mozsearch

# Dark Matter Detector (DMD)

DMD (short for "dark matter detector") is a heap profiler within

Firefox. It has four modes.

-   "Dark Matter" mode. In this mode, DMD tracks the contents of the

    heap, including which heap blocks have been reported by memory

    reporters. It helps us reduce the "heap-unclassified" value in

    Firefox's about:memory page, and also detects if any heap blocks

    are reported twice. Originally, this was the only mode that DMD had,

    which explains DMD's name. This is the default mode.

-   "Live" mode. In this mode, DMD tracks the current contents of the

    heap. You can dump that information to file, giving a profile of the

    live heap blocks at that point in time. This is good for

    understanding how memory is used at an interesting point in time,

    such as peak memory usage.

-   "Cumulative" mode. In this mode, DMD tracks both the past and

    current contents of the heap. You can dump that information to file,

    giving a profile of the heap usage for the entire session. This is

    good for finding parts of the code that cause high heap churn, e.g.

    by allocating many short-lived allocations.

-   "Heap scanning" mode. This mode is like live mode, but it also

    records the contents of every live block in the log. This can be

    used to investigate leaks by figuring out which objects might be

    holding references to other objects.

## Building and Running

### Nightly Firefox

The easiest way to use DMD is with the normal Nightly Firefox build,

which has DMD already enabled in the build. To have DMD active while

running it, you just need to set the environment variable `DMD=1` when

running. For instance, on OSX, you can run something like:

    DMD=1 /Applications/Firefox\ Nightly.app/Contents/MacOS/firefox

You can tell it is working by going to `about:memory` and looking for

"Save DMD Output". If DMD has been properly enabled, the "Save"

button won't be grayed out. Look at the "Trigger" section below to

see the full list of ways to get a DMD report once you have it

activated. Note that the stack information you get will likely be less

detailed, due to being unable to symbolicate. You will be able to get

function names, but not line numbers.

The [`dmd.py`](https://searchfox.org/mozilla-central/rev/c414b4538dd3c7e1dc674f7b66176e7c309afa95/memory/replace/dmd/dmd.py) script can be found in the Firefox repository.

### Desktop Firefox

#### Build

Build Firefox with this option added to your mozconfig:

    ac_add_options --enable-dmd

If building via try server, modify

`browser/config/mozconfigs/linux64/common-opt` or a similar file before

pushing.

#### Launch

Use `mach run --dmd`; use `--mode` to choose the mode.

On a Windows build done by the try server, [these

instructions](https://bugzilla.mozilla.org/show_bug.cgi?id=936784#c69) from

2013 may or may not be useful.

#### Trigger

There are a few ways to trigger a DMD snapshot. Most of these will also

first get a memory report. When DMD is working on writing its output, it

will print logging like this:

    DMD[5222] opened /tmp/dmd-1414556492-5222.json.gz for writing

    DMD[5222] Dump 1 {

    DMD[5222]   Constructing the heap block list...

    DMD[5222]   Constructing the stack trace table...

    DMD[5222]   Constructing the stack frame table...

    DMD[5222] }

You'll see separate output for each process. This step can take 10 or

more seconds and may make Firefox freeze temporarily.

If you see the "opened" line, it tells you where the file was saved.

It's always in a temp directory, and the filenames are always of the

form dmd-<pid>.

The ways to trigger a DMD snapshot are:

1.  Visit about:memory and click the "Save" button under "Save DMD output".

    The button won't be present in non-DMD builds, and will be grayed out

    in DMD builds if DMD isn't enabled at start-up.

2.  If you wish to trigger DMD dumps from within C++ or JavaScript code,

    you can use `nsIMemoryInfoDumper.dumpMemoryInfoToTempDir`. For example,

    from JavaScript code you can do the following.

        const Cc = Components.classes;

        let mydumper = Cc["@mozilla.org/memory-info-dumper;1"]

                         .getService(Ci.nsIMemoryInfoDumper);

        mydumper.dumpMemoryInfoToTempDir(identifier, anonymize, minimize);

    This will dump memory reports and DMD output to the temporary

    directory. `identifier` is a string that will be used for part of

    the filename (or a timestamp will be used if it is an empty string);

    `anonymize` is a boolean that indicates if the memory reports should

    be anonymized; and `minimize` is a boolean that indicates if memory

    usage should be minimized first.

3.  On Linux, you can send signal 34 to the firefox process, e.g.

    with the following command.

        $ killall -34 firefox

4. The `MOZ_DMD_SHUTDOWN_LOG` environment variable, if set, triggers a DMD

   run at shutdown; its value must be a directory where the logs will be

   placed. This is mostly useful for debugging leaks. Which processes get

   logged is controlled by the `MOZ_DMD_LOG_PROCESS` environment variable.

   If this is not set, it will log all processes. It can be set to any valid

   value of `XRE_GetProcessTypeString()` and will log only those processes.

   For instance, if set to `default` it will only log the parent process. If

   set to `tab`, it will log content processes only.

   For example, if you have

       MOZ_DMD_SHUTDOWN_LOG=~/dmdlogs/ MOZ_DMD_LOG_PROCESS=tab

   then DMD will create logs at shutdown for content processes and save them to

   `~/dmdlogs/`.

**NOTE:**

-   To dump DMD data from content processes, you'll need to disable the

    sandbox with `MOZ_DISABLE_CONTENT_SANDBOX=1`.

-   MOZ_DMD_SHUTDOWN_LOG must (currently) include the trailing separator

    (\'\'/\")

### Fennec

**NOTE:**

You'll note from the name of this section being "Fennec" that these instructions

are very old. Hopefully they'll be more useful than not having them.

**NOTE:**

In order to use DMD on Fennec you will need root access on the Android

device. Instructions on how to root your device is outside the scope of

this document.

#### Build

Build with these options:

    ac_add_options --enable-dmd

#### Prep

In order to prepare your device for running Fennec with DMD enabled, you

will need to do a few things. First, you will need to push the libdmd.so

library to the device so that it can by dynamically loaded by Fennec.

You can do this by running:

    adb push $OBJDIR/dist/bin/libdmd.so /sdcard/

Second, you will need to make an executable wrapper for Fennec which

sets an environment variable before launching it. (If you are familiar

with the recommended "--es env0" method for setting environment

variables when launching Fennec, note that you cannot use this method

here because those are processed too late in the startup process. If you

are not familiar with that method, you can ignore this parenthetical

note.) First make the executable wrapper on your host machine using the

editor of your choice. Name the file dmd_fennec and enter this as the

contents:

    #!/system/bin/sh

    export MOZ_REPLACE_MALLOC_LIB=/sdcard/libdmd.so

    exec "$@"

If you want to use other DMD options, you can enter additional

environment variables above. You will need to push this to the device

and make it executable. Since you cannot mark files in /sdcard/ as

executable, we will use /data/local/tmp for this purpose:

    adb push dmd_fennec /data/local/tmp

    adb shell

    cd /data/local/tmp

    chmod 755 dmd_fennec

The final step is to make Android use the above wrapper script while

launching Fennec, so that the environment variable is present when

Fennec starts up. Assuming you have done a local build, the app

identifier will be `org.mozilla.fennec_$USERNAME` (`$USERNAME` is your

username on the host machine) and so we do this as shown below. If you

are using a DMD-enabled try build, or build from other source, adjust

the app identifier as necessary.

    adb shell

    su    # You need root access for the setprop command to take effect

    setprop wrap.org.mozilla.fennec_$USERNAME "/data/local/tmp/dmd_fennec"

Once this is set up, starting the `org.mozilla.fennec_$USERNAME` app

will use the wrapper script.

#### Launch

Launch Fennec either by tapping on the icon as usual, or from the

command line (as before, be sure to replace

`org.mozilla.fennec_$USERNAME` with the app identifier as appropriate).

    adb shell am start -n org.mozilla.fennec_$USERNAME/.App

#### Trigger

Use the existing memory-report dumping hook:

    adb shell am broadcast -a org.mozilla.gecko.MEMORY_DUMP

In logcat, you should see output similar to this:

    I/DMD     (20731): opened /storage/emulated/0/Download/memory-reports/dmd-default-20731.json.gz for writing

...

    I/GeckoConsole(20731): nsIMemoryInfoDumper dumped reports to /storage/emulated/0/Download/memory-reports/unified-memory-report-default-20731.json.gz

The path is where the memory reports and DMD reports get dumped to. You

can pull them like so:

    adb pull /sdcard/Download/memory-reports/dmd-default-20731.json.gz

    adb pull /sdcard/Download/memory-reports/unified-memory-report-default-20731.json.gz

## Processing the output

DMD outputs one gzipped JSON file per process that contains a

description of that process's heap. You can analyze these files (either

gzipped or not) using `dmd.py`.

Some platforms (Linux, Mac, Android) require stack fixing, which adds

missing filenames, function names and line number information. This will

occur automatically the first time you run `dmd.py` on the output file.

This can take 10s of seconds or more to complete. (This will fail if

your build does not contain symbols. However, if you have crash reporter

symbols for your build -- as tryserver builds do -- you can use [this

script](https://github.com/mstange/analyze-tryserver-profiles/blob/master/resymbolicate_dmd.py)

instead: clone the whole repo, edit the paths at the top of

`resymbolicate_dmd.py` and run it.) The simplest way to do this is to

just run the `dmd.py` script on your DMD report while your working

directory is `$OBJDIR/dist/bin`. This will allow the local libraries to

be found and used.

If you invoke `dmd.py` without arguments you will get output appropriate

for the mode in which DMD was invoked.

### "Dark matter" mode output

For "dark matter" mode, `dmd.py`'s output describes how the live heap

blocks are covered by memory reports. This output is broken into

multiple sections.

1.  "Invocation". This tells you how DMD was invoked, i.e. what

    options were used.

2.  "Twice-reported stack trace records". This tells you which heap

    blocks were reported twice or more. The presence of any such records

    indicates bugs in one or more memory reporters.

3.  "Unreported stack trace records". This tells you which heap blocks

    were not reported, which indicate where additional memory reporters

    would be most helpful.

4.  "Once-reported stack trace records": like the "Unreported stack

    trace records" section, but for blocks reported once.

5.  "Summary": gives measurements of the total heap, and the

    unreported/once-reported/twice-reported portions of it.

The "Twice-reported stack trace records" and "Unreported stack trace

records" sections are the most important, because they indicate ways in

which the memory reporters can be improved.

Here's an example stack trace record from the "Unreported stack trace

records" section.

    Unreported {

      150 blocks in heap block record 283 of 5,495

      21,600 bytes (20,400 requested / 1,200 slop)

      Individual block sizes: 144 x 150

      0.00% of the heap (16.85% cumulative)

      0.02% of unreported (94.68% cumulative)

      Allocated at {

        #01: replace_malloc (/home/njn/moz/mi5/go64dmd/memory/replace/dmd/../../../../memory/replace/dmd/DMD.cpp:1286)

        #02: malloc (/home/njn/moz/mi5/go64dmd/memory/build/../../../memory/build/replace_malloc.c:153)

        #03: moz_xmalloc (/home/njn/moz/mi5/memory/mozalloc/mozalloc.cpp:84)

        #04: nsCycleCollectingAutoRefCnt::incr(void*, nsCycleCollectionParticipant*) (/home/njn/moz/mi5/go64dmd/dom/xul/../../dist/include/nsISupportsImpl.h:250)

        #05: nsXULElement::Create(nsXULPrototypeElement*, nsIDocument*, bool, bool,mozilla::dom::Element**) (/home/njn/moz/mi5/dom/xul/nsXULElement.cpp:287)

        #06: nsXBLContentSink::CreateElement(char16_t const**, unsigned int, mozilla::dom::NodeInfo*, unsigned int, nsIContent**, bool*, mozilla::dom::FromParser) (/home/njn/moz/mi5/dom/xbl/nsXBLContentSink.cpp:874)

        #07: nsCOMPtr<nsIContent>::StartAssignment() (/home/njn/moz/mi5/go64dmd/dom/xml/../../dist/include/nsCOMPtr.h:753)

        #08: nsXMLContentSink::HandleStartElement(char16_t const*, char16_t const**, unsigned int, unsigned int, bool) (/home/njn/moz/mi5/dom/xml/nsXMLContentSink.cpp:1007)

It tells you that there were 150 heap blocks that were allocated from

the program point indicated by the "Allocated at" stack trace, that

these blocks took up 21,600 bytes, that all 150 blocks had a size of 144

bytes, and that 1,200 of those bytes were "slop" (wasted space caused

by the heap allocator rounding up request sizes). It also indicates what

percentage of the total heap size and the unreported portion of the heap

these blocks represent.

Within each section, records are listed from largest to smallest.

Once-reported and twice-reported stack trace records also have stack

traces for the report point(s). For example:

    Reported at {

      #01: mozilla::dmd::Report(void const*) (/home/njn/moz/mi2/memory/replace/dmd/DMD.cpp:1740) 0x7f68652581ca

      #02: CycleCollectorMallocSizeOf(void const*) (/home/njn/moz/mi2/xpcom/base/nsCycleCollector.cpp:3008) 0x7f6860fdfe02

      #03: nsPurpleBuffer::SizeOfExcludingThis(unsigned long (*)(void const*)) const (/home/njn/moz/mi2/xpcom/base/nsCycleCollector.cpp:933) 0x7f6860fdb7af

      #04: nsCycleCollector::SizeOfIncludingThis(unsigned long (*)(void const*), unsigned long*, unsigned long*, unsigned long*, unsigned long*, unsigned long*) const (/home/njn/moz/mi2/xpcom/base/nsCycleCollector.cpp:3029) 0x7f6860fdb6b1

      #05: CycleCollectorMultiReporter::CollectReports(nsIMemoryMultiReporterCallback*, nsISupports*) (/home/njn/moz/mi2/xpcom/base/nsCycleCollector.cpp:3075) 0x7f6860fde432

      #06: nsMemoryInfoDumper::DumpMemoryReportsToFileImpl(nsAString_internal const&) (/home/njn/moz/mi2/xpcom/base/nsMemoryInfoDumper.cpp:626) 0x7f6860fece79

      #07: nsMemoryInfoDumper::DumpMemoryReportsToFile(nsAString_internal const&, bool, bool) (/home/njn/moz/mi2/xpcom/base/nsMemoryInfoDumper.cpp:344) 0x7f6860febaf9

      #08: mozilla::(anonymous namespace)::DumpMemoryReportsRunnable::Run() (/home/njn/moz/mi2/xpcom/base/nsMemoryInfoDumper.cpp:58) 0x7f6860fefe03

You can tell which memory reporter made the report by the name of the

`MallocSizeOf` function near the top of the stack trace. In this case it

was the cycle collector's reporter.

By default, DMD does not record an allocation stack trace for most

blocks, to make it run faster. The decision on whether to record is done

probabilistically, and larger blocks are more likely to have an

allocation stack trace recorded. All unreported blocks that lack an

allocation stack trace will end up in a single record. For example:

    Unreported {

      420,010 blocks in heap block record 2 of 5,495

      29,203,408 bytes (27,777,288 requested / 1,426,120 slop)

      Individual block sizes: 2,048 x 3; 1,024 x 103; 512 x 147; 496 x 7; 480 x 31; 464 x 6; 448 x 50; 432 x 41; 416 x 28; 400 x 53; 384 x 43; 368 x 216; 352 x 141; 336 x 58; 320 x 104; 304 x 5,130; 288 x 150; 272 x 591; 256 x 6,017; 240 x 1,372; 224 x 93; 208 x 488; 192 x 1,919; 176 x 18,903; 160 x 1,754; 144 x 5,041; 128 x 36,709; 112 x 5,571; 96 x 6,280; 80 x 40,738; 64 x 37,925; 48 x 78,392; 32 x 136,199; 16 x 31,001; 8 x 4,706

      3.78% of the heap (10.24% cumulative)

      21.24% of unreported (57.53% cumulative)

      Allocated at {

        #01: (no stack trace recorded due to --stacks=partial)

In contrast, stack traces are always recorded when a block is reported,

which means you can end up with records like this where the allocation

point is unknown but the reporting point *is* known:

    Once-reported {

      104,491 blocks in heap block record 13 of 4,689

      10,392,000 bytes (10,392,000 requested / 0 slop)

      Individual block sizes: 512 x 124; 256 x 242; 192 x 813; 128 x 54,664; 64 x 48,648

      1.35% of the heap (48.65% cumulative)

      1.64% of once-reported (59.18% cumulative)

      Allocated at {

        #01: (no stack trace recorded due to --stacks=partial)

      Reported at {

        #01: mozilla::dmd::DMDFuncs::Report(void const*) (/home/njn/moz/mi5/go64dmd/memory/replace/dmd/../../../../memory/replace/dmd/DMD.cpp:1646)

        #02: WindowsMallocSizeOf(void const*) (/home/njn/moz/mi5/dom/base/nsWindowMemoryReporter.cpp:189)

        #03: nsAttrAndChildArray::SizeOfExcludingThis(unsigned long (*)(void const*)) const (/home/njn/moz/mi5/dom/base/nsAttrAndChildArray.cpp:880)

        #04: mozilla::dom::FragmentOrElement::SizeOfExcludingThis(unsigned long (*)(void const*)) const (/home/njn/moz/mi5/dom/base/FragmentOrElement.cpp:2337)

        #05: nsINode::SizeOfIncludingThis(unsigned long (*)(void const*)) const (/home/njn/moz/mi5/go64dmd/parser/html/../../../dom/base/nsINode.h:307)

        #06: mozilla::dom::NodeInfo::NodeType() const (/home/njn/moz/mi5/go64dmd/dom/base/../../dist/include/mozilla/dom/NodeInfo.h:127)

        #07: nsHTMLDocument::DocAddSizeOfExcludingThis(nsWindowSizes*) const (/home/njn/moz/mi5/dom/html/nsHTMLDocument.cpp:3710)

        #08: nsIDocument::DocAddSizeOfIncludingThis(nsWindowSizes*) const (/home/njn/moz/mi5/dom/base/nsDocument.cpp:12820)

The choice of whether to record an allocation stack trace for all blocks

is controlled by an option (see below).

### "Live" mode output

For "live" mode, dmd.py's output describes what live heap blocks are

present. This output is broken into multiple sections.

1.  "Invocation". This tells you how DMD was invoked, i.e. what

    options were used.

2.  "Live stack trace records". This tells you which heap blocks were

    present.

3.  "Summary": gives measurements of the total heap.

The individual records are similar to those output in "dark matter"

mode.

### "Cumulative" mode output

For "cumulative" mode, dmd.py's output describes how the live heap

blocks are covered by memory reports. This output is broken into

multiple sections.

1.  "Invocation". This tells you how DMD was invoked, i.e. what

    options were used.

2.  "Cumulative stack trace records". This tells you which heap blocks

    were allocated during the session.

3.  "Summary": gives measurements of the total (cumulative) heap.

The individual records are similar to those output in "dark matter"

mode.

### "Scan" mode output

For "scan" mode, the output of `dmd.py` is the same as "live" mode.

A separate script, `block_analyzer.py`, can be used to find out

information about which blocks refer to a particular block.

`dmd.py --clamp-contents` needs to be run on the log first. See [this

other page](heap_scan_mode.md) for an

overview of how to use heap scan mode to fix a leak involving refcounted

objects.

## Options

### Runtime

When you run `mach run --dmd` you can specify additional options to

control how DMD runs. Run `mach help run` for documentation on these.

The most interesting one is `--mode`. Acceptable values are

`dark-matter` (the default), `live`, `cumulative`, and `scan`.

Another interesting one is `--stacks`. Acceptable values are `partial`

(the default) and `full`. In the former case most blocks will not have

an allocation stack trace recorded. However, because larger blocks are

more likely to have one recorded, most allocated bytes should have an

allocation stack trace even though most allocated blocks do not. Use

`--stacks=full` if you want complete information, but note that DMD will

run substantially slower in that case.

The options may also be put in the environment variable DMD, or set DMD

to 1 to enable DMD with default options (dark-matter and partial

stacks).

### Post-processing

`dmd.py` also takes options that control how it works. Run `dmd.py -h`

for documentation. The following options are the most interesting ones.

-   `-f` / `--max-frames`. By default, records show up to 8 stack

    frames. You can choose a smaller number, in which case more

    allocations will be aggregated into each record, but you'll have

    less context. Or you can choose a larger number, in which cases

    allocations will be split across more records, but you will have

    more context. There is no single best value, but values in the range

    2..10 are often good. The maximum is 24.

-   `-a` / `--ignore-alloc-fns`. Many allocation stack traces start

    with multiple frames that mention allocation wrapper functions, e.g.

    `js_calloc()` calls `replace_calloc()`. This option filters these

    out. It often helps improve the quality of the output when using a

    small `--max-frames` value.

-   `-s` / `--sort-by`. This controls how records are sorted. Acceptable

    values are `usable` (the default), `req`, `slop` and `num-blocks`.

-   `--clamp-contents`. For a heap scan log, this performs a

    conservative pointer analysis on the contents of each block,

    changing any value that is a pointer into the middle of a live block

    into a pointer to the start of that block. All other values are

    changes to null. In addition, all trailing nulls are removed from

    the block contents.

As an example that combines multiple options, if you apply the following

command to a profile obtained in "live" mode:

    dmd.py -r -f 2 -a -s slop

it will give you a good idea of where the major sources of slop are.

`dmd.py` can also compute the difference between two DMD output files,

so long as those files were produced in the same mode. Simply pass it

two filenames instead of one to get the difference.

## Which heap blocks are reported?

At this stage you might wonder how DMD knows, in "dark matter" mode,

which allocations have been reported and which haven't. DMD only knows

about heap blocks that are measured via a function created with one of

the following two macros:

    MOZ_DEFINE_MALLOC_SIZE_OF

    MOZ_DEFINE_MALLOC_SIZE_OF_ON_ALLOC

Fortunately, most of the existing memory reporters do this. See

[Performance/Memory_Reporting](https://developer.mozilla.org/en-US/docs/Mozilla/Performance/Memory_reporting "Platform/Memory Reporting")

for more details about how memory reporters are written.

Source code

Revision control

Copy as Markdown

Other Tools