Revision control
Copy as Markdown
Other Tools
use std::{collections::hash_map::Entry, ops::Range, sync::Arc, vec::Drain};
use crate::{
device::Device,
init_tracker::*,
resource::{DestroyedResourceError, ParentDevice, Texture, Trackable},
snatch::SnatchGuard,
track::{DeviceTracker, TextureTracker},
FastHashMap,
};
use super::{clear::clear_texture, BakedCommands, ClearError};
/// Surface that was discarded by `StoreOp::Discard` of a preceding renderpass.
/// Any read access to this surface needs to be preceded by a texture initialization.
#[derive(Clone)]
pub(crate) struct TextureSurfaceDiscard {
pub texture: Arc<Texture>,
pub mip_level: u32,
pub layer: u32,
}
pub(crate) type SurfacesInDiscardState = Vec<TextureSurfaceDiscard>;
#[derive(Default)]
pub(crate) struct CommandBufferTextureMemoryActions {
/// The tracker actions that we need to be executed before the command
/// buffer is executed.
init_actions: Vec<TextureInitTrackerAction>,
/// All the discards that haven't been followed by init again within the
/// command buffer i.e. everything in this list resets the texture init
/// state *after* the command buffer execution
discards: Vec<TextureSurfaceDiscard>,
}
impl CommandBufferTextureMemoryActions {
pub(crate) fn drain_init_actions(&mut self) -> Drain<TextureInitTrackerAction> {
self.init_actions.drain(..)
}
pub(crate) fn discard(&mut self, discard: TextureSurfaceDiscard) {
self.discards.push(discard);
}
// Registers a TextureInitTrackerAction.
// Returns previously discarded surface that need to be initialized *immediately* now.
// Only returns a non-empty list if action is MemoryInitKind::NeedsInitializedMemory.
#[must_use]
pub(crate) fn register_init_action(
&mut self,
action: &TextureInitTrackerAction,
) -> SurfacesInDiscardState {
let mut immediately_necessary_clears = SurfacesInDiscardState::new();
// Note that within a command buffer we may stack arbitrary memory init
// actions on the same texture Since we react to them in sequence, they
// are going to be dropped again at queue submit
//
// We don't need to add MemoryInitKind::NeedsInitializedMemory to
// init_actions if a surface is part of the discard list. But that would
// mean splitting up the action which is more than we'd win here.
self.init_actions.extend(
action
.texture
.initialization_status
.read()
.check_action(action),
);
// We expect very few discarded surfaces at any point in time which is
// why a simple linear search is likely best. (i.e. most of the time
// self.discards is empty!)
let init_actions = &mut self.init_actions;
self.discards.retain(|discarded_surface| {
if discarded_surface.texture.is_equal(&action.texture)
&& action.range.layer_range.contains(&discarded_surface.layer)
&& action
.range
.mip_range
.contains(&discarded_surface.mip_level)
{
if let MemoryInitKind::NeedsInitializedMemory = action.kind {
immediately_necessary_clears.push(discarded_surface.clone());
// Mark surface as implicitly initialized (this is relevant
// because it might have been uninitialized prior to
// discarding
init_actions.push(TextureInitTrackerAction {
texture: discarded_surface.texture.clone(),
range: TextureInitRange {
mip_range: discarded_surface.mip_level
..(discarded_surface.mip_level + 1),
layer_range: discarded_surface.layer..(discarded_surface.layer + 1),
},
kind: MemoryInitKind::ImplicitlyInitialized,
});
}
false
} else {
true
}
});
immediately_necessary_clears
}
// Shortcut for register_init_action when it is known that the action is an
// implicit init, not requiring any immediate resource init.
pub(crate) fn register_implicit_init(
&mut self,
texture: &Arc<Texture>,
range: TextureInitRange,
) {
let must_be_empty = self.register_init_action(&TextureInitTrackerAction {
texture: texture.clone(),
range,
kind: MemoryInitKind::ImplicitlyInitialized,
});
assert!(must_be_empty.is_empty());
}
}
// Utility function that takes discarded surfaces from (several calls to)
// register_init_action and initializes them on the spot.
//
// Takes care of barriers as well!
pub(crate) fn fixup_discarded_surfaces<InitIter: Iterator<Item = TextureSurfaceDiscard>>(
inits: InitIter,
encoder: &mut dyn hal::DynCommandEncoder,
texture_tracker: &mut TextureTracker,
device: &Device,
snatch_guard: &SnatchGuard<'_>,
) {
for init in inits {
clear_texture(
&init.texture,
TextureInitRange {
mip_range: init.mip_level..(init.mip_level + 1),
layer_range: init.layer..(init.layer + 1),
},
encoder,
texture_tracker,
&device.alignments,
device.zero_buffer.as_ref(),
snatch_guard,
)
.unwrap();
}
}
impl BakedCommands {
// inserts all buffer initializations that are going to be needed for
// executing the commands and updates resource init states accordingly
pub(crate) fn initialize_buffer_memory(
&mut self,
device_tracker: &mut DeviceTracker,
snatch_guard: &SnatchGuard<'_>,
) -> Result<(), DestroyedResourceError> {
profiling::scope!("initialize_buffer_memory");
// Gather init ranges for each buffer so we can collapse them.
// It is not possible to do this at an earlier point since previously
// executed command buffer change the resource init state.
let mut uninitialized_ranges_per_buffer = FastHashMap::default();
for buffer_use in self.buffer_memory_init_actions.drain(..) {
let mut initialization_status = buffer_use.buffer.initialization_status.write();
// align the end to 4
let end_remainder = buffer_use.range.end % wgt::COPY_BUFFER_ALIGNMENT;
let end = if end_remainder == 0 {
buffer_use.range.end
} else {
buffer_use.range.end + wgt::COPY_BUFFER_ALIGNMENT - end_remainder
};
let uninitialized_ranges = initialization_status.drain(buffer_use.range.start..end);
match buffer_use.kind {
MemoryInitKind::ImplicitlyInitialized => {}
MemoryInitKind::NeedsInitializedMemory => {
match uninitialized_ranges_per_buffer.entry(buffer_use.buffer.tracker_index()) {
Entry::Vacant(e) => {
e.insert((
buffer_use.buffer.clone(),
uninitialized_ranges.collect::<Vec<Range<wgt::BufferAddress>>>(),
));
}
Entry::Occupied(mut e) => {
e.get_mut().1.extend(uninitialized_ranges);
}
}
}
}
}
for (buffer, mut ranges) in uninitialized_ranges_per_buffer.into_values() {
// Collapse touching ranges.
ranges.sort_by_key(|r| r.start);
for i in (1..ranges.len()).rev() {
// The memory init tracker made sure of this!
assert!(ranges[i - 1].end <= ranges[i].start);
if ranges[i].start == ranges[i - 1].end {
ranges[i - 1].end = ranges[i].end;
ranges.swap_remove(i); // Ordering not important at this point
}
}
// Don't do use_replace since the buffer may already no longer have
// a ref_count.
//
// However, we *know* that it is currently in use, so the tracker
// must already know about it.
let transition = device_tracker
.buffers
.set_single(&buffer, hal::BufferUses::COPY_DST);
let raw_buf = buffer.try_raw(snatch_guard)?;
unsafe {
self.encoder.transition_buffers(
transition
.map(|pending| pending.into_hal(&buffer, snatch_guard))
.as_slice(),
);
}
for range in ranges.iter() {
assert!(
range.start % wgt::COPY_BUFFER_ALIGNMENT == 0,
"Buffer {:?} has an uninitialized range with a start \
not aligned to 4 (start was {})",
raw_buf,
range.start
);
assert!(
range.end % wgt::COPY_BUFFER_ALIGNMENT == 0,
"Buffer {:?} has an uninitialized range with an end \
not aligned to 4 (end was {})",
raw_buf,
range.end
);
unsafe {
self.encoder.clear_buffer(raw_buf, range.clone());
}
}
}
Ok(())
}
// inserts all texture initializations that are going to be needed for
// executing the commands and updates resource init states accordingly any
// textures that are left discarded by this command buffer will be marked as
// uninitialized
pub(crate) fn initialize_texture_memory(
&mut self,
device_tracker: &mut DeviceTracker,
device: &Device,
snatch_guard: &SnatchGuard<'_>,
) -> Result<(), DestroyedResourceError> {
profiling::scope!("initialize_texture_memory");
let mut ranges: Vec<TextureInitRange> = Vec::new();
for texture_use in self.texture_memory_actions.drain_init_actions() {
let mut initialization_status = texture_use.texture.initialization_status.write();
let use_range = texture_use.range;
let affected_mip_trackers = initialization_status
.mips
.iter_mut()
.enumerate()
.skip(use_range.mip_range.start as usize)
.take((use_range.mip_range.end - use_range.mip_range.start) as usize);
match texture_use.kind {
MemoryInitKind::ImplicitlyInitialized => {
for (_, mip_tracker) in affected_mip_trackers {
mip_tracker.drain(use_range.layer_range.clone());
}
}
MemoryInitKind::NeedsInitializedMemory => {
for (mip_level, mip_tracker) in affected_mip_trackers {
for layer_range in mip_tracker.drain(use_range.layer_range.clone()) {
ranges.push(TextureInitRange {
mip_range: (mip_level as u32)..(mip_level as u32 + 1),
layer_range,
});
}
}
}
}
// TODO: Could we attempt some range collapsing here?
for range in ranges.drain(..) {
let clear_result = clear_texture(
&texture_use.texture,
range,
self.encoder.as_mut(),
&mut device_tracker.textures,
&device.alignments,
device.zero_buffer.as_ref(),
snatch_guard,
);
// A Texture can be destroyed between the command recording
// and now, this is out of our control so we have to handle
// it gracefully.
if let Err(ClearError::DestroyedResource(e)) = clear_result {
return Err(e);
}
// Other errors are unexpected.
if let Err(error) = clear_result {
panic!("{error}");
}
}
}
// Now that all buffers/textures have the proper init state for before
// cmdbuf start, we discard init states for textures it left discarded
// after its execution.
for surface_discard in self.texture_memory_actions.discards.iter() {
surface_discard
.texture
.initialization_status
.write()
.discard(surface_discard.mip_level, surface_discard.layer);
}
Ok(())
}
}