Revision control
Copy as Markdown
Other Tools
//! `TcpStream` owned split support.
//!
//! A `TcpStream` can be split into an `OwnedReadHalf` and a `OwnedWriteHalf`
//! with the `TcpStream::into_split` method. `OwnedReadHalf` implements
//! `AsyncRead` while `OwnedWriteHalf` implements `AsyncWrite`.
//!
//! Compared to the generic split of `AsyncRead + AsyncWrite`, this specialized
//! split has no associated overhead and enforces all invariants at the type
//! level.
use crate::future::poll_fn;
use crate::io::{AsyncRead, AsyncWrite, Interest, ReadBuf, Ready};
use crate::net::TcpStream;
use std::error::Error;
use std::net::{Shutdown, SocketAddr};
use std::pin::Pin;
use std::sync::Arc;
use std::task::{Context, Poll};
use std::{fmt, io};
cfg_io_util! {
use bytes::BufMut;
}
/// Owned read half of a [`TcpStream`], created by [`into_split`].
///
/// Reading from an `OwnedReadHalf` is usually done using the convenience methods found
/// on the [`AsyncReadExt`] trait.
///
/// [`TcpStream`]: TcpStream
/// [`into_split`]: TcpStream::into_split()
/// [`AsyncReadExt`]: trait@crate::io::AsyncReadExt
#[derive(Debug)]
pub struct OwnedReadHalf {
inner: Arc<TcpStream>,
}
/// Owned write half of a [`TcpStream`], created by [`into_split`].
///
/// Note that in the [`AsyncWrite`] implementation of this type, [`poll_shutdown`] will
/// shut down the TCP stream in the write direction. Dropping the write half
/// will also shut down the write half of the TCP stream.
///
/// Writing to an `OwnedWriteHalf` is usually done using the convenience methods found
/// on the [`AsyncWriteExt`] trait.
///
/// [`TcpStream`]: TcpStream
/// [`into_split`]: TcpStream::into_split()
/// [`AsyncWrite`]: trait@crate::io::AsyncWrite
/// [`poll_shutdown`]: fn@crate::io::AsyncWrite::poll_shutdown
/// [`AsyncWriteExt`]: trait@crate::io::AsyncWriteExt
#[derive(Debug)]
pub struct OwnedWriteHalf {
inner: Arc<TcpStream>,
shutdown_on_drop: bool,
}
pub(crate) fn split_owned(stream: TcpStream) -> (OwnedReadHalf, OwnedWriteHalf) {
let arc = Arc::new(stream);
let read = OwnedReadHalf {
inner: Arc::clone(&arc),
};
let write = OwnedWriteHalf {
inner: arc,
shutdown_on_drop: true,
};
(read, write)
}
pub(crate) fn reunite(
read: OwnedReadHalf,
write: OwnedWriteHalf,
) -> Result<TcpStream, ReuniteError> {
if Arc::ptr_eq(&read.inner, &write.inner) {
write.forget();
// This unwrap cannot fail as the api does not allow creating more than two Arcs,
// and we just dropped the other half.
Ok(Arc::try_unwrap(read.inner).expect("TcpStream: try_unwrap failed in reunite"))
} else {
Err(ReuniteError(read, write))
}
}
/// Error indicating that two halves were not from the same socket, and thus could
/// not be reunited.
#[derive(Debug)]
pub struct ReuniteError(pub OwnedReadHalf, pub OwnedWriteHalf);
impl fmt::Display for ReuniteError {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
write!(
f,
"tried to reunite halves that are not from the same socket"
)
}
}
impl Error for ReuniteError {}
impl OwnedReadHalf {
/// Attempts to put the two halves of a `TcpStream` back together and
/// recover the original socket. Succeeds only if the two halves
/// originated from the same call to [`into_split`].
///
/// [`into_split`]: TcpStream::into_split()
pub fn reunite(self, other: OwnedWriteHalf) -> Result<TcpStream, ReuniteError> {
reunite(self, other)
}
/// Attempt to receive data on the socket, without removing that data from
/// the queue, registering the current task for wakeup if data is not yet
/// available.
///
/// Note that on multiple calls to `poll_peek` or `poll_read`, only the
/// `Waker` from the `Context` passed to the most recent call is scheduled
/// to receive a wakeup.
///
/// See the [`TcpStream::poll_peek`] level documentation for more details.
///
/// # Examples
///
/// ```no_run
/// use tokio::io::{self, ReadBuf};
/// use tokio::net::TcpStream;
///
/// use futures::future::poll_fn;
///
/// #[tokio::main]
/// async fn main() -> io::Result<()> {
/// let stream = TcpStream::connect("127.0.0.1:8000").await?;
/// let (mut read_half, _) = stream.into_split();
/// let mut buf = [0; 10];
/// let mut buf = ReadBuf::new(&mut buf);
///
/// poll_fn(|cx| {
/// read_half.poll_peek(cx, &mut buf)
/// }).await?;
///
/// Ok(())
/// }
/// ```
///
/// [`TcpStream::poll_peek`]: TcpStream::poll_peek
pub fn poll_peek(
&mut self,
cx: &mut Context<'_>,
buf: &mut ReadBuf<'_>,
) -> Poll<io::Result<usize>> {
self.inner.poll_peek(cx, buf)
}
/// Receives data on the socket from the remote address to which it is
/// connected, without removing that data from the queue. On success,
/// returns the number of bytes peeked.
///
/// See the [`TcpStream::peek`] level documentation for more details.
///
/// [`TcpStream::peek`]: TcpStream::peek
///
/// # Examples
///
/// ```no_run
/// use tokio::net::TcpStream;
/// use tokio::io::AsyncReadExt;
/// use std::error::Error;
///
/// #[tokio::main]
/// async fn main() -> Result<(), Box<dyn Error>> {
/// // Connect to a peer
/// let stream = TcpStream::connect("127.0.0.1:8080").await?;
/// let (mut read_half, _) = stream.into_split();
///
/// let mut b1 = [0; 10];
/// let mut b2 = [0; 10];
///
/// // Peek at the data
/// let n = read_half.peek(&mut b1).await?;
///
/// // Read the data
/// assert_eq!(n, read_half.read(&mut b2[..n]).await?);
/// assert_eq!(&b1[..n], &b2[..n]);
///
/// Ok(())
/// }
/// ```
///
/// The [`read`] method is defined on the [`AsyncReadExt`] trait.
///
/// [`read`]: fn@crate::io::AsyncReadExt::read
/// [`AsyncReadExt`]: trait@crate::io::AsyncReadExt
pub async fn peek(&mut self, buf: &mut [u8]) -> io::Result<usize> {
let mut buf = ReadBuf::new(buf);
poll_fn(|cx| self.poll_peek(cx, &mut buf)).await
}
/// Waits for any of the requested ready states.
///
/// This function is usually paired with [`try_read()`]. It can be used instead
/// of [`readable()`] to check the returned ready set for [`Ready::READABLE`]
/// and [`Ready::READ_CLOSED`] events.
///
/// The function may complete without the socket being ready. This is a
/// false-positive and attempting an operation will return with
/// `io::ErrorKind::WouldBlock`. The function can also return with an empty
/// [`Ready`] set, so you should always check the returned value and possibly
/// wait again if the requested states are not set.
///
/// This function is equivalent to [`TcpStream::ready`].
///
/// [`try_read()`]: Self::try_read
/// [`readable()`]: Self::readable
///
/// # Cancel safety
///
/// This method is cancel safe. Once a readiness event occurs, the method
/// will continue to return immediately until the readiness event is
/// consumed by an attempt to read or write that fails with `WouldBlock` or
/// `Poll::Pending`.
pub async fn ready(&self, interest: Interest) -> io::Result<Ready> {
self.inner.ready(interest).await
}
/// Waits for the socket to become readable.
///
/// This function is equivalent to `ready(Interest::READABLE)` and is usually
/// paired with `try_read()`.
///
/// This function is also equivalent to [`TcpStream::ready`].
///
/// # Cancel safety
///
/// This method is cancel safe. Once a readiness event occurs, the method
/// will continue to return immediately until the readiness event is
/// consumed by an attempt to read that fails with `WouldBlock` or
/// `Poll::Pending`.
pub async fn readable(&self) -> io::Result<()> {
self.inner.readable().await
}
/// Tries to read data from the stream into the provided buffer, returning how
/// many bytes were read.
///
/// Receives any pending data from the socket but does not wait for new data
/// to arrive. On success, returns the number of bytes read. Because
/// `try_read()` is non-blocking, the buffer does not have to be stored by
/// the async task and can exist entirely on the stack.
///
/// Usually, [`readable()`] or [`ready()`] is used with this function.
///
/// [`readable()`]: Self::readable()
/// [`ready()`]: Self::ready()
///
/// # Return
///
/// If data is successfully read, `Ok(n)` is returned, where `n` is the
/// number of bytes read. If `n` is `0`, then it can indicate one of two scenarios:
///
/// 1. The stream's read half is closed and will no longer yield data.
/// 2. The specified buffer was 0 bytes in length.
///
/// If the stream is not ready to read data,
/// `Err(io::ErrorKind::WouldBlock)` is returned.
pub fn try_read(&self, buf: &mut [u8]) -> io::Result<usize> {
self.inner.try_read(buf)
}
/// Tries to read data from the stream into the provided buffers, returning
/// how many bytes were read.
///
/// Data is copied to fill each buffer in order, with the final buffer
/// written to possibly being only partially filled. This method behaves
/// equivalently to a single call to [`try_read()`] with concatenated
/// buffers.
///
/// Receives any pending data from the socket but does not wait for new data
/// to arrive. On success, returns the number of bytes read. Because
/// `try_read_vectored()` is non-blocking, the buffer does not have to be
/// stored by the async task and can exist entirely on the stack.
///
/// Usually, [`readable()`] or [`ready()`] is used with this function.
///
/// [`try_read()`]: Self::try_read()
/// [`readable()`]: Self::readable()
/// [`ready()`]: Self::ready()
///
/// # Return
///
/// If data is successfully read, `Ok(n)` is returned, where `n` is the
/// number of bytes read. `Ok(0)` indicates the stream's read half is closed
/// and will no longer yield data. If the stream is not ready to read data
/// `Err(io::ErrorKind::WouldBlock)` is returned.
pub fn try_read_vectored(&self, bufs: &mut [io::IoSliceMut<'_>]) -> io::Result<usize> {
self.inner.try_read_vectored(bufs)
}
cfg_io_util! {
/// Tries to read data from the stream into the provided buffer, advancing the
/// buffer's internal cursor, returning how many bytes were read.
///
/// Receives any pending data from the socket but does not wait for new data
/// to arrive. On success, returns the number of bytes read. Because
/// `try_read_buf()` is non-blocking, the buffer does not have to be stored by
/// the async task and can exist entirely on the stack.
///
/// Usually, [`readable()`] or [`ready()`] is used with this function.
///
/// [`readable()`]: Self::readable()
/// [`ready()`]: Self::ready()
///
/// # Return
///
/// If data is successfully read, `Ok(n)` is returned, where `n` is the
/// number of bytes read. `Ok(0)` indicates the stream's read half is closed
/// and will no longer yield data. If the stream is not ready to read data
/// `Err(io::ErrorKind::WouldBlock)` is returned.
pub fn try_read_buf<B: BufMut>(&self, buf: &mut B) -> io::Result<usize> {
self.inner.try_read_buf(buf)
}
}
/// Returns the remote address that this stream is connected to.
pub fn peer_addr(&self) -> io::Result<SocketAddr> {
self.inner.peer_addr()
}
/// Returns the local address that this stream is bound to.
pub fn local_addr(&self) -> io::Result<SocketAddr> {
self.inner.local_addr()
}
}
impl AsyncRead for OwnedReadHalf {
fn poll_read(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
buf: &mut ReadBuf<'_>,
) -> Poll<io::Result<()>> {
self.inner.poll_read_priv(cx, buf)
}
}
impl OwnedWriteHalf {
/// Attempts to put the two halves of a `TcpStream` back together and
/// recover the original socket. Succeeds only if the two halves
/// originated from the same call to [`into_split`].
///
/// [`into_split`]: TcpStream::into_split()
pub fn reunite(self, other: OwnedReadHalf) -> Result<TcpStream, ReuniteError> {
reunite(other, self)
}
/// Destroys the write half, but don't close the write half of the stream
/// until the read half is dropped. If the read half has already been
/// dropped, this closes the stream.
pub fn forget(mut self) {
self.shutdown_on_drop = false;
drop(self);
}
/// Waits for any of the requested ready states.
///
/// This function is usually paired with [`try_write()`]. It can be used instead
/// of [`writable()`] to check the returned ready set for [`Ready::WRITABLE`]
/// and [`Ready::WRITE_CLOSED`] events.
///
/// The function may complete without the socket being ready. This is a
/// false-positive and attempting an operation will return with
/// `io::ErrorKind::WouldBlock`. The function can also return with an empty
/// [`Ready`] set, so you should always check the returned value and possibly
/// wait again if the requested states are not set.
///
/// This function is equivalent to [`TcpStream::ready`].
///
/// [`try_write()`]: Self::try_write
/// [`writable()`]: Self::writable
///
/// # Cancel safety
///
/// This method is cancel safe. Once a readiness event occurs, the method
/// will continue to return immediately until the readiness event is
/// consumed by an attempt to read or write that fails with `WouldBlock` or
/// `Poll::Pending`.
pub async fn ready(&self, interest: Interest) -> io::Result<Ready> {
self.inner.ready(interest).await
}
/// Waits for the socket to become writable.
///
/// This function is equivalent to `ready(Interest::WRITABLE)` and is usually
/// paired with `try_write()`.
///
/// # Cancel safety
///
/// This method is cancel safe. Once a readiness event occurs, the method
/// will continue to return immediately until the readiness event is
/// consumed by an attempt to write that fails with `WouldBlock` or
/// `Poll::Pending`.
pub async fn writable(&self) -> io::Result<()> {
self.inner.writable().await
}
/// Tries to write a buffer to the stream, returning how many bytes were
/// written.
///
/// The function will attempt to write the entire contents of `buf`, but
/// only part of the buffer may be written.
///
/// This function is usually paired with `writable()`.
///
/// # Return
///
/// If data is successfully written, `Ok(n)` is returned, where `n` is the
/// number of bytes written. If the stream is not ready to write data,
/// `Err(io::ErrorKind::WouldBlock)` is returned.
pub fn try_write(&self, buf: &[u8]) -> io::Result<usize> {
self.inner.try_write(buf)
}
/// Tries to write several buffers to the stream, returning how many bytes
/// were written.
///
/// Data is written from each buffer in order, with the final buffer read
/// from possible being only partially consumed. This method behaves
/// equivalently to a single call to [`try_write()`] with concatenated
/// buffers.
///
/// This function is usually paired with `writable()`.
///
/// [`try_write()`]: Self::try_write()
///
/// # Return
///
/// If data is successfully written, `Ok(n)` is returned, where `n` is the
/// number of bytes written. If the stream is not ready to write data,
/// `Err(io::ErrorKind::WouldBlock)` is returned.
pub fn try_write_vectored(&self, bufs: &[io::IoSlice<'_>]) -> io::Result<usize> {
self.inner.try_write_vectored(bufs)
}
/// Returns the remote address that this stream is connected to.
pub fn peer_addr(&self) -> io::Result<SocketAddr> {
self.inner.peer_addr()
}
/// Returns the local address that this stream is bound to.
pub fn local_addr(&self) -> io::Result<SocketAddr> {
self.inner.local_addr()
}
}
impl Drop for OwnedWriteHalf {
fn drop(&mut self) {
if self.shutdown_on_drop {
let _ = self.inner.shutdown_std(Shutdown::Write);
}
}
}
impl AsyncWrite for OwnedWriteHalf {
fn poll_write(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
buf: &[u8],
) -> Poll<io::Result<usize>> {
self.inner.poll_write_priv(cx, buf)
}
fn poll_write_vectored(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
bufs: &[io::IoSlice<'_>],
) -> Poll<io::Result<usize>> {
self.inner.poll_write_vectored_priv(cx, bufs)
}
fn is_write_vectored(&self) -> bool {
self.inner.is_write_vectored()
}
#[inline]
fn poll_flush(self: Pin<&mut Self>, _: &mut Context<'_>) -> Poll<io::Result<()>> {
// tcp flush is a no-op
Poll::Ready(Ok(()))
}
// `poll_shutdown` on a write half shutdowns the stream in the "write" direction.
fn poll_shutdown(self: Pin<&mut Self>, _: &mut Context<'_>) -> Poll<io::Result<()>> {
let res = self.inner.shutdown_std(Shutdown::Write);
if res.is_ok() {
Pin::into_inner(self).shutdown_on_drop = false;
}
res.into()
}
}
impl AsRef<TcpStream> for OwnedReadHalf {
fn as_ref(&self) -> &TcpStream {
&self.inner
}
}
impl AsRef<TcpStream> for OwnedWriteHalf {
fn as_ref(&self) -> &TcpStream {
&self.inner
}
}