Revision control

Copy as Markdown

Other Tools

use super::store::Resolve;
use super::*;
use crate::frame::{Reason, StreamId};
use crate::codec::UserError;
use crate::codec::UserError::*;
use bytes::buf::{Buf, Take};
use std::{
cmp::{self, Ordering},
fmt, io, mem,
task::{Context, Poll, Waker},
};
/// # Warning
///
/// Queued streams are ordered by stream ID, as we need to ensure that
/// lower-numbered streams are sent headers before higher-numbered ones.
/// This is because "idle" stream IDs – those which have been initiated but
/// have yet to receive frames – will be implicitly closed on receipt of a
/// frame on a higher stream ID. If these queues was not ordered by stream
/// IDs, some mechanism would be necessary to ensure that the lowest-numbered]
/// idle stream is opened first.
#[derive(Debug)]
pub(super) struct Prioritize {
/// Queue of streams waiting for socket capacity to send a frame.
pending_send: store::Queue<stream::NextSend>,
/// Queue of streams waiting for window capacity to produce data.
pending_capacity: store::Queue<stream::NextSendCapacity>,
/// Streams waiting for capacity due to max concurrency
///
/// The `SendRequest` handle is `Clone`. This enables initiating requests
/// from many tasks. However, offering this capability while supporting
/// backpressure at some level is tricky. If there are many `SendRequest`
/// handles and a single stream becomes available, which handle gets
/// assigned that stream? Maybe that handle is no longer ready to send a
/// request.
///
/// The strategy used is to allow each `SendRequest` handle one buffered
/// request. A `SendRequest` handle is ready to send a request if it has no
/// associated buffered requests. This is the same strategy as `mpsc` in the
/// futures library.
pending_open: store::Queue<stream::NextOpen>,
/// Connection level flow control governing sent data
flow: FlowControl,
/// Stream ID of the last stream opened.
last_opened_id: StreamId,
/// What `DATA` frame is currently being sent in the codec.
in_flight_data_frame: InFlightData,
/// The maximum amount of bytes a stream should buffer.
max_buffer_size: usize,
}
#[derive(Debug, Eq, PartialEq)]
enum InFlightData {
/// There is no `DATA` frame in flight.
Nothing,
/// There is a `DATA` frame in flight belonging to the given stream.
DataFrame(store::Key),
/// There was a `DATA` frame, but the stream's queue was since cleared.
Drop,
}
pub(crate) struct Prioritized<B> {
// The buffer
inner: Take<B>,
end_of_stream: bool,
// The stream that this is associated with
stream: store::Key,
}
// ===== impl Prioritize =====
impl Prioritize {
pub fn new(config: &Config) -> Prioritize {
let mut flow = FlowControl::new();
flow.inc_window(config.remote_init_window_sz)
.expect("invalid initial window size");
// TODO: proper error handling
let _res = flow.assign_capacity(config.remote_init_window_sz);
debug_assert!(_res.is_ok());
tracing::trace!("Prioritize::new; flow={:?}", flow);
Prioritize {
pending_send: store::Queue::new(),
pending_capacity: store::Queue::new(),
pending_open: store::Queue::new(),
flow,
last_opened_id: StreamId::ZERO,
in_flight_data_frame: InFlightData::Nothing,
max_buffer_size: config.local_max_buffer_size,
}
}
pub(crate) fn max_buffer_size(&self) -> usize {
self.max_buffer_size
}
/// Queue a frame to be sent to the remote
pub fn queue_frame<B>(
&mut self,
frame: Frame<B>,
buffer: &mut Buffer<Frame<B>>,
stream: &mut store::Ptr,
task: &mut Option<Waker>,
) {
let span = tracing::trace_span!("Prioritize::queue_frame", ?stream.id);
let _e = span.enter();
// Queue the frame in the buffer
stream.pending_send.push_back(buffer, frame);
self.schedule_send(stream, task);
}
pub fn schedule_send(&mut self, stream: &mut store::Ptr, task: &mut Option<Waker>) {
// If the stream is waiting to be opened, nothing more to do.
if stream.is_send_ready() {
tracing::trace!(?stream.id, "schedule_send");
// Queue the stream
self.pending_send.push(stream);
// Notify the connection.
if let Some(task) = task.take() {
task.wake();
}
}
}
pub fn queue_open(&mut self, stream: &mut store::Ptr) {
self.pending_open.push(stream);
}
/// Send a data frame
pub fn send_data<B>(
&mut self,
frame: frame::Data<B>,
buffer: &mut Buffer<Frame<B>>,
stream: &mut store::Ptr,
counts: &mut Counts,
task: &mut Option<Waker>,
) -> Result<(), UserError>
where
B: Buf,
{
let sz = frame.payload().remaining();
if sz > MAX_WINDOW_SIZE as usize {
return Err(UserError::PayloadTooBig);
}
let sz = sz as WindowSize;
if !stream.state.is_send_streaming() {
if stream.state.is_closed() {
return Err(InactiveStreamId);
} else {
return Err(UnexpectedFrameType);
}
}
// Update the buffered data counter
stream.buffered_send_data += sz as usize;
let span =
tracing::trace_span!("send_data", sz, requested = stream.requested_send_capacity);
let _e = span.enter();
tracing::trace!(buffered = stream.buffered_send_data);
// Implicitly request more send capacity if not enough has been
// requested yet.
if (stream.requested_send_capacity as usize) < stream.buffered_send_data {
// Update the target requested capacity
stream.requested_send_capacity =
cmp::min(stream.buffered_send_data, WindowSize::MAX as usize) as WindowSize;
self.try_assign_capacity(stream);
}
if frame.is_end_stream() {
stream.state.send_close();
self.reserve_capacity(0, stream, counts);
}
tracing::trace!(
available = %stream.send_flow.available(),
buffered = stream.buffered_send_data,
);
// The `stream.buffered_send_data == 0` check is here so that, if a zero
// length data frame is queued to the front (there is no previously
// queued data), it gets sent out immediately even if there is no
// available send window.
//
// Sending out zero length data frames can be done to signal
// end-of-stream.
//
if stream.send_flow.available() > 0 || stream.buffered_send_data == 0 {
// The stream currently has capacity to send the data frame, so
// queue it up and notify the connection task.
self.queue_frame(frame.into(), buffer, stream, task);
} else {
// The stream has no capacity to send the frame now, save it but
// don't notify the connection task. Once additional capacity
// becomes available, the frame will be flushed.
stream.pending_send.push_back(buffer, frame.into());
}
Ok(())
}
/// Request capacity to send data
pub fn reserve_capacity(
&mut self,
capacity: WindowSize,
stream: &mut store::Ptr,
counts: &mut Counts,
) {
let span = tracing::trace_span!(
"reserve_capacity",
?stream.id,
requested = capacity,
effective = (capacity as usize) + stream.buffered_send_data,
curr = stream.requested_send_capacity
);
let _e = span.enter();
// Actual capacity is `capacity` + the current amount of buffered data.
// If it were less, then we could never send out the buffered data.
let capacity = (capacity as usize) + stream.buffered_send_data;
match capacity.cmp(&(stream.requested_send_capacity as usize)) {
Ordering::Equal => {
// Nothing to do
}
Ordering::Less => {
// Update the target requested capacity
stream.requested_send_capacity = capacity as WindowSize;
// Currently available capacity assigned to the stream
let available = stream.send_flow.available().as_size();
// If the stream has more assigned capacity than requested, reclaim
// some for the connection
if available as usize > capacity {
let diff = available - capacity as WindowSize;
// TODO: proper error handling
let _res = stream.send_flow.claim_capacity(diff);
debug_assert!(_res.is_ok());
self.assign_connection_capacity(diff, stream, counts);
}
}
Ordering::Greater => {
// If trying to *add* capacity, but the stream send side is closed,
// there's nothing to be done.
if stream.state.is_send_closed() {
return;
}
// Update the target requested capacity
stream.requested_send_capacity =
cmp::min(capacity, WindowSize::MAX as usize) as WindowSize;
// Try to assign additional capacity to the stream. If none is
// currently available, the stream will be queued to receive some
// when more becomes available.
self.try_assign_capacity(stream);
}
}
}
pub fn recv_stream_window_update(
&mut self,
inc: WindowSize,
stream: &mut store::Ptr,
) -> Result<(), Reason> {
let span = tracing::trace_span!(
"recv_stream_window_update",
?stream.id,
?stream.state,
inc,
flow = ?stream.send_flow
);
let _e = span.enter();
if stream.state.is_send_closed() && stream.buffered_send_data == 0 {
// We can't send any data, so don't bother doing anything else.
return Ok(());
}
// Update the stream level flow control.
stream.send_flow.inc_window(inc)?;
// If the stream is waiting on additional capacity, then this will
// assign it (if available on the connection) and notify the producer
self.try_assign_capacity(stream);
Ok(())
}
pub fn recv_connection_window_update(
&mut self,
inc: WindowSize,
store: &mut Store,
counts: &mut Counts,
) -> Result<(), Reason> {
// Update the connection's window
self.flow.inc_window(inc)?;
self.assign_connection_capacity(inc, store, counts);
Ok(())
}
/// Reclaim all capacity assigned to the stream and re-assign it to the
/// connection
pub fn reclaim_all_capacity(&mut self, stream: &mut store::Ptr, counts: &mut Counts) {
let available = stream.send_flow.available().as_size();
if available > 0 {
// TODO: proper error handling
let _res = stream.send_flow.claim_capacity(available);
debug_assert!(_res.is_ok());
// Re-assign all capacity to the connection
self.assign_connection_capacity(available, stream, counts);
}
}
/// Reclaim just reserved capacity, not buffered capacity, and re-assign
/// it to the connection
pub fn reclaim_reserved_capacity(&mut self, stream: &mut store::Ptr, counts: &mut Counts) {
// only reclaim requested capacity that isn't already buffered
if stream.requested_send_capacity as usize > stream.buffered_send_data {
let reserved = stream.requested_send_capacity - stream.buffered_send_data as WindowSize;
// TODO: proper error handling
let _res = stream.send_flow.claim_capacity(reserved);
debug_assert!(_res.is_ok());
self.assign_connection_capacity(reserved, stream, counts);
}
}
pub fn clear_pending_capacity(&mut self, store: &mut Store, counts: &mut Counts) {
let span = tracing::trace_span!("clear_pending_capacity");
let _e = span.enter();
while let Some(stream) = self.pending_capacity.pop(store) {
counts.transition(stream, |_, stream| {
tracing::trace!(?stream.id, "clear_pending_capacity");
})
}
}
pub fn assign_connection_capacity<R>(
&mut self,
inc: WindowSize,
store: &mut R,
counts: &mut Counts,
) where
R: Resolve,
{
let span = tracing::trace_span!("assign_connection_capacity", inc);
let _e = span.enter();
// TODO: proper error handling
let _res = self.flow.assign_capacity(inc);
debug_assert!(_res.is_ok());
// Assign newly acquired capacity to streams pending capacity.
while self.flow.available() > 0 {
let stream = match self.pending_capacity.pop(store) {
Some(stream) => stream,
None => return,
};
// Streams pending capacity may have been reset before capacity
// became available. In that case, the stream won't want any
// capacity, and so we shouldn't "transition" on it, but just evict
// it and continue the loop.
if !(stream.state.is_send_streaming() || stream.buffered_send_data > 0) {
continue;
}
counts.transition(stream, |_, stream| {
// Try to assign capacity to the stream. This will also re-queue the
// stream if there isn't enough connection level capacity to fulfill
// the capacity request.
self.try_assign_capacity(stream);
})
}
}
/// Request capacity to send data
fn try_assign_capacity(&mut self, stream: &mut store::Ptr) {
let total_requested = stream.requested_send_capacity;
// Total requested should never go below actual assigned
// (Note: the window size can go lower than assigned)
debug_assert!(stream.send_flow.available() <= total_requested as usize);
// The amount of additional capacity that the stream requests.
// Don't assign more than the window has available!
let additional = cmp::min(
total_requested - stream.send_flow.available().as_size(),
// Can't assign more than what is available
stream.send_flow.window_size() - stream.send_flow.available().as_size(),
);
let span = tracing::trace_span!("try_assign_capacity", ?stream.id);
let _e = span.enter();
tracing::trace!(
requested = total_requested,
additional,
buffered = stream.buffered_send_data,
window = stream.send_flow.window_size(),
conn = %self.flow.available()
);
if additional == 0 {
// Nothing more to do
return;
}
// If the stream has requested capacity, then it must be in the
// streaming state (more data could be sent) or there is buffered data
// waiting to be sent.
debug_assert!(
stream.state.is_send_streaming() || stream.buffered_send_data > 0,
"state={:?}",
stream.state
);
// The amount of currently available capacity on the connection
let conn_available = self.flow.available().as_size();
// First check if capacity is immediately available
if conn_available > 0 {
// The amount of capacity to assign to the stream
// TODO: Should prioritization factor into this?
let assign = cmp::min(conn_available, additional);
tracing::trace!(capacity = assign, "assigning");
// Assign the capacity to the stream
stream.assign_capacity(assign, self.max_buffer_size);
// Claim the capacity from the connection
// TODO: proper error handling
let _res = self.flow.claim_capacity(assign);
debug_assert!(_res.is_ok());
}
tracing::trace!(
available = %stream.send_flow.available(),
requested = stream.requested_send_capacity,
buffered = stream.buffered_send_data,
has_unavailable = %stream.send_flow.has_unavailable()
);
if stream.send_flow.available() < stream.requested_send_capacity as usize
&& stream.send_flow.has_unavailable()
{
// The stream requires additional capacity and the stream's
// window has available capacity, but the connection window
// does not.
//
// In this case, the stream needs to be queued up for when the
// connection has more capacity.
self.pending_capacity.push(stream);
}
// If data is buffered and the stream is send ready, then
// schedule the stream for execution
if stream.buffered_send_data > 0 && stream.is_send_ready() {
// TODO: This assertion isn't *exactly* correct. There can still be
// buffered send data while the stream's pending send queue is
// empty. This can happen when a large data frame is in the process
// of being **partially** sent. Once the window has been sent, the
// data frame will be returned to the prioritization layer to be
// re-scheduled.
//
// That said, it would be nice to figure out how to make this
// assertion correctly.
//
// debug_assert!(!stream.pending_send.is_empty());
self.pending_send.push(stream);
}
}
pub fn poll_complete<T, B>(
&mut self,
cx: &mut Context,
buffer: &mut Buffer<Frame<B>>,
store: &mut Store,
counts: &mut Counts,
dst: &mut Codec<T, Prioritized<B>>,
) -> Poll<io::Result<()>>
where
T: AsyncWrite + Unpin,
B: Buf,
{
// Ensure codec is ready
ready!(dst.poll_ready(cx))?;
// Reclaim any frame that has previously been written
self.reclaim_frame(buffer, store, dst);
// The max frame length
let max_frame_len = dst.max_send_frame_size();
tracing::trace!("poll_complete");
loop {
if let Some(mut stream) = self.pop_pending_open(store, counts) {
self.pending_send.push_front(&mut stream);
}
match self.pop_frame(buffer, store, max_frame_len, counts) {
Some(frame) => {
tracing::trace!(?frame, "writing");
debug_assert_eq!(self.in_flight_data_frame, InFlightData::Nothing);
if let Frame::Data(ref frame) = frame {
self.in_flight_data_frame = InFlightData::DataFrame(frame.payload().stream);
}
dst.buffer(frame).expect("invalid frame");
// Ensure the codec is ready to try the loop again.
ready!(dst.poll_ready(cx))?;
// Because, always try to reclaim...
self.reclaim_frame(buffer, store, dst);
}
None => {
// Try to flush the codec.
ready!(dst.flush(cx))?;
// This might release a data frame...
if !self.reclaim_frame(buffer, store, dst) {
return Poll::Ready(Ok(()));
}
// No need to poll ready as poll_complete() does this for
// us...
}
}
}
}
/// Tries to reclaim a pending data frame from the codec.
///
/// Returns true if a frame was reclaimed.
///
/// When a data frame is written to the codec, it may not be written in its
/// entirety (large chunks are split up into potentially many data frames).
/// In this case, the stream needs to be reprioritized.
fn reclaim_frame<T, B>(
&mut self,
buffer: &mut Buffer<Frame<B>>,
store: &mut Store,
dst: &mut Codec<T, Prioritized<B>>,
) -> bool
where
B: Buf,
{
let span = tracing::trace_span!("try_reclaim_frame");
let _e = span.enter();
// First check if there are any data chunks to take back
if let Some(frame) = dst.take_last_data_frame() {
self.reclaim_frame_inner(buffer, store, frame)
} else {
false
}
}
fn reclaim_frame_inner<B>(
&mut self,
buffer: &mut Buffer<Frame<B>>,
store: &mut Store,
frame: frame::Data<Prioritized<B>>,
) -> bool
where
B: Buf,
{
tracing::trace!(
?frame,
sz = frame.payload().inner.get_ref().remaining(),
"reclaimed"
);
let mut eos = false;
let key = frame.payload().stream;
match mem::replace(&mut self.in_flight_data_frame, InFlightData::Nothing) {
InFlightData::Nothing => panic!("wasn't expecting a frame to reclaim"),
InFlightData::Drop => {
tracing::trace!("not reclaiming frame for cancelled stream");
return false;
}
InFlightData::DataFrame(k) => {
debug_assert_eq!(k, key);
}
}
let mut frame = frame.map(|prioritized| {
// TODO: Ensure fully written
eos = prioritized.end_of_stream;
prioritized.inner.into_inner()
});
if frame.payload().has_remaining() {
let mut stream = store.resolve(key);
if eos {
frame.set_end_stream(true);
}
self.push_back_frame(frame.into(), buffer, &mut stream);
return true;
}
false
}
/// Push the frame to the front of the stream's deque, scheduling the
/// stream if needed.
fn push_back_frame<B>(
&mut self,
frame: Frame<B>,
buffer: &mut Buffer<Frame<B>>,
stream: &mut store::Ptr,
) {
// Push the frame to the front of the stream's deque
stream.pending_send.push_front(buffer, frame);
// If needed, schedule the sender
if stream.send_flow.available() > 0 {
debug_assert!(!stream.pending_send.is_empty());
self.pending_send.push(stream);
}
}
pub fn clear_queue<B>(&mut self, buffer: &mut Buffer<Frame<B>>, stream: &mut store::Ptr) {
let span = tracing::trace_span!("clear_queue", ?stream.id);
let _e = span.enter();
// TODO: make this more efficient?
while let Some(frame) = stream.pending_send.pop_front(buffer) {
tracing::trace!(?frame, "dropping");
}
stream.buffered_send_data = 0;
stream.requested_send_capacity = 0;
if let InFlightData::DataFrame(key) = self.in_flight_data_frame {
if stream.key() == key {
// This stream could get cleaned up now - don't allow the buffered frame to get reclaimed.
self.in_flight_data_frame = InFlightData::Drop;
}
}
}
pub fn clear_pending_send(&mut self, store: &mut Store, counts: &mut Counts) {
while let Some(stream) = self.pending_send.pop(store) {
let is_pending_reset = stream.is_pending_reset_expiration();
counts.transition_after(stream, is_pending_reset);
}
}
pub fn clear_pending_open(&mut self, store: &mut Store, counts: &mut Counts) {
while let Some(stream) = self.pending_open.pop(store) {
let is_pending_reset = stream.is_pending_reset_expiration();
counts.transition_after(stream, is_pending_reset);
}
}
fn pop_frame<B>(
&mut self,
buffer: &mut Buffer<Frame<B>>,
store: &mut Store,
max_len: usize,
counts: &mut Counts,
) -> Option<Frame<Prioritized<B>>>
where
B: Buf,
{
let span = tracing::trace_span!("pop_frame");
let _e = span.enter();
loop {
match self.pending_send.pop(store) {
Some(mut stream) => {
let span = tracing::trace_span!("popped", ?stream.id, ?stream.state);
let _e = span.enter();
// It's possible that this stream, besides having data to send,
// is also queued to send a reset, and thus is already in the queue
// to wait for "some time" after a reset.
//
// To be safe, we just always ask the stream.
let is_pending_reset = stream.is_pending_reset_expiration();
tracing::trace!(is_pending_reset);
let frame = match stream.pending_send.pop_front(buffer) {
Some(Frame::Data(mut frame)) => {
// Get the amount of capacity remaining for stream's
// window.
let stream_capacity = stream.send_flow.available();
let sz = frame.payload().remaining();
tracing::trace!(
sz,
eos = frame.is_end_stream(),
window = %stream_capacity,
available = %stream.send_flow.available(),
requested = stream.requested_send_capacity,
buffered = stream.buffered_send_data,
"data frame"
);
// Zero length data frames always have capacity to
// be sent.
if sz > 0 && stream_capacity == 0 {
tracing::trace!("stream capacity is 0");
// Ensure that the stream is waiting for
// connection level capacity
//
// TODO: uncomment
// debug_assert!(stream.is_pending_send_capacity);
// The stream has no more capacity, this can
// happen if the remote reduced the stream
// window. In this case, we need to buffer the
// frame and wait for a window update...
stream.pending_send.push_front(buffer, frame.into());
continue;
}
// Only send up to the max frame length
let len = cmp::min(sz, max_len);
// Only send up to the stream's window capacity
let len =
cmp::min(len, stream_capacity.as_size() as usize) as WindowSize;
// There *must* be be enough connection level
// capacity at this point.
debug_assert!(len <= self.flow.window_size());
// Check if the stream level window the peer knows is available. In some
// scenarios, maybe the window we know is available but the window which
// peer knows is not.
if len > 0 && len > stream.send_flow.window_size() {
stream.pending_send.push_front(buffer, frame.into());
continue;
}
tracing::trace!(len, "sending data frame");
// Update the flow control
tracing::trace_span!("updating stream flow").in_scope(|| {
stream.send_data(len, self.max_buffer_size);
// Assign the capacity back to the connection that
// was just consumed from the stream in the previous
// line.
// TODO: proper error handling
let _res = self.flow.assign_capacity(len);
debug_assert!(_res.is_ok());
});
let (eos, len) = tracing::trace_span!("updating connection flow")
.in_scope(|| {
// TODO: proper error handling
let _res = self.flow.send_data(len);
debug_assert!(_res.is_ok());
// Wrap the frame's data payload to ensure that the
// correct amount of data gets written.
let eos = frame.is_end_stream();
let len = len as usize;
if frame.payload().remaining() > len {
frame.set_end_stream(false);
}
(eos, len)
});
Frame::Data(frame.map(|buf| Prioritized {
inner: buf.take(len),
end_of_stream: eos,
stream: stream.key(),
}))
}
Some(Frame::PushPromise(pp)) => {
let mut pushed =
stream.store_mut().find_mut(&pp.promised_id()).unwrap();
pushed.is_pending_push = false;
// Transition stream from pending_push to pending_open
// if possible
if !pushed.pending_send.is_empty() {
if counts.can_inc_num_send_streams() {
counts.inc_num_send_streams(&mut pushed);
self.pending_send.push(&mut pushed);
} else {
self.queue_open(&mut pushed);
}
}
Frame::PushPromise(pp)
}
Some(frame) => frame.map(|_| {
unreachable!(
"Frame::map closure will only be called \
on DATA frames."
)
}),
None => {
if let Some(reason) = stream.state.get_scheduled_reset() {
let stream_id = stream.id;
stream
.state
.set_reset(stream_id, reason, Initiator::Library);
let frame = frame::Reset::new(stream.id, reason);
Frame::Reset(frame)
} else {
// If the stream receives a RESET from the peer, it may have
// had data buffered to be sent, but all the frames are cleared
// in clear_queue(). Instead of doing O(N) traversal through queue
// to remove, lets just ignore the stream here.
tracing::trace!("removing dangling stream from pending_send");
// Since this should only happen as a consequence of `clear_queue`,
// we must be in a closed state of some kind.
debug_assert!(stream.state.is_closed());
counts.transition_after(stream, is_pending_reset);
continue;
}
}
};
tracing::trace!("pop_frame; frame={:?}", frame);
if cfg!(debug_assertions) && stream.state.is_idle() {
debug_assert!(stream.id > self.last_opened_id);
self.last_opened_id = stream.id;
}
if !stream.pending_send.is_empty() || stream.state.is_scheduled_reset() {
// TODO: Only requeue the sender IF it is ready to send
// the next frame. i.e. don't requeue it if the next
// frame is a data frame and the stream does not have
// any more capacity.
self.pending_send.push(&mut stream);
}
counts.transition_after(stream, is_pending_reset);
return Some(frame);
}
None => return None,
}
}
}
fn pop_pending_open<'s>(
&mut self,
store: &'s mut Store,
counts: &mut Counts,
) -> Option<store::Ptr<'s>> {
tracing::trace!("schedule_pending_open");
// check for any pending open streams
if counts.can_inc_num_send_streams() {
if let Some(mut stream) = self.pending_open.pop(store) {
tracing::trace!("schedule_pending_open; stream={:?}", stream.id);
counts.inc_num_send_streams(&mut stream);
stream.notify_send();
return Some(stream);
}
}
None
}
}
// ===== impl Prioritized =====
impl<B> Buf for Prioritized<B>
where
B: Buf,
{
fn remaining(&self) -> usize {
self.inner.remaining()
}
fn chunk(&self) -> &[u8] {
self.inner.chunk()
}
fn chunks_vectored<'a>(&'a self, dst: &mut [std::io::IoSlice<'a>]) -> usize {
self.inner.chunks_vectored(dst)
}
fn advance(&mut self, cnt: usize) {
self.inner.advance(cnt)
}
}
impl<B: Buf> fmt::Debug for Prioritized<B> {
fn fmt(&self, fmt: &mut fmt::Formatter) -> fmt::Result {
fmt.debug_struct("Prioritized")
.field("remaining", &self.inner.get_ref().remaining())
.field("end_of_stream", &self.end_of_stream)
.field("stream", &self.stream)
.finish()
}
}