Revision control
Copy as Markdown
Other Tools
use crate::common::{
DebugAddrBase, DebugAddrIndex, DebugLocListsBase, DebugLocListsIndex, DwarfFileType, Encoding,
LocationListsOffset, SectionId,
};
use crate::constants;
use crate::endianity::Endianity;
use crate::read::{
lists::ListsHeader, DebugAddr, EndianSlice, Error, Expression, Range, RawRange, Reader,
ReaderOffset, ReaderOffsetId, Result, Section,
};
/// The raw contents of the `.debug_loc` section.
#[derive(Debug, Default, Clone, Copy)]
pub struct DebugLoc<R> {
pub(crate) section: R,
}
impl<'input, Endian> DebugLoc<EndianSlice<'input, Endian>>
where
Endian: Endianity,
{
/// Construct a new `DebugLoc` instance from the data in the `.debug_loc`
/// section.
///
/// It is the caller's responsibility to read the `.debug_loc` section and
/// present it as a `&[u8]` slice. That means using some ELF loader on
/// Linux, a Mach-O loader on macOS, etc.
///
/// ```
/// use gimli::{DebugLoc, LittleEndian};
///
/// # let buf = [0x00, 0x01, 0x02, 0x03];
/// # let read_debug_loc_section_somehow = || &buf;
/// let debug_loc = DebugLoc::new(read_debug_loc_section_somehow(), LittleEndian);
/// ```
pub fn new(section: &'input [u8], endian: Endian) -> Self {
Self::from(EndianSlice::new(section, endian))
}
}
impl<T> DebugLoc<T> {
/// Create a `DebugLoc` section that references the data in `self`.
///
/// This is useful when `R` implements `Reader` but `T` does not.
///
/// Used by `DwarfSections::borrow`.
pub(crate) fn borrow<'a, F, R>(&'a self, mut borrow: F) -> DebugLoc<R>
where
F: FnMut(&'a T) -> R,
{
borrow(&self.section).into()
}
}
impl<R> Section<R> for DebugLoc<R> {
fn id() -> SectionId {
SectionId::DebugLoc
}
fn reader(&self) -> &R {
&self.section
}
}
impl<R> From<R> for DebugLoc<R> {
fn from(section: R) -> Self {
DebugLoc { section }
}
}
/// The `DebugLocLists` struct represents the DWARF data
/// found in the `.debug_loclists` section.
#[derive(Debug, Default, Clone, Copy)]
pub struct DebugLocLists<R> {
section: R,
}
impl<'input, Endian> DebugLocLists<EndianSlice<'input, Endian>>
where
Endian: Endianity,
{
/// Construct a new `DebugLocLists` instance from the data in the `.debug_loclists`
/// section.
///
/// It is the caller's responsibility to read the `.debug_loclists` section and
/// present it as a `&[u8]` slice. That means using some ELF loader on
/// Linux, a Mach-O loader on macOS, etc.
///
/// ```
/// use gimli::{DebugLocLists, LittleEndian};
///
/// # let buf = [0x00, 0x01, 0x02, 0x03];
/// # let read_debug_loclists_section_somehow = || &buf;
/// let debug_loclists = DebugLocLists::new(read_debug_loclists_section_somehow(), LittleEndian);
/// ```
pub fn new(section: &'input [u8], endian: Endian) -> Self {
Self::from(EndianSlice::new(section, endian))
}
}
impl<T> DebugLocLists<T> {
/// Create a `DebugLocLists` section that references the data in `self`.
///
/// This is useful when `R` implements `Reader` but `T` does not.
///
/// Used by `DwarfSections::borrow`.
pub(crate) fn borrow<'a, F, R>(&'a self, mut borrow: F) -> DebugLocLists<R>
where
F: FnMut(&'a T) -> R,
{
borrow(&self.section).into()
}
}
impl<R> Section<R> for DebugLocLists<R> {
fn id() -> SectionId {
SectionId::DebugLocLists
}
fn reader(&self) -> &R {
&self.section
}
}
impl<R> From<R> for DebugLocLists<R> {
fn from(section: R) -> Self {
DebugLocLists { section }
}
}
pub(crate) type LocListsHeader = ListsHeader;
impl<Offset> DebugLocListsBase<Offset>
where
Offset: ReaderOffset,
{
/// Returns a `DebugLocListsBase` with the default value of DW_AT_loclists_base
/// for the given `Encoding` and `DwarfFileType`.
pub fn default_for_encoding_and_file(
encoding: Encoding,
file_type: DwarfFileType,
) -> DebugLocListsBase<Offset> {
if encoding.version >= 5 && file_type == DwarfFileType::Dwo {
// In .dwo files, the compiler omits the DW_AT_loclists_base attribute (because there is
// only a single unit in the file) but we must skip past the header, which the attribute
// would normally do for us.
DebugLocListsBase(Offset::from_u8(LocListsHeader::size_for_encoding(encoding)))
} else {
DebugLocListsBase(Offset::from_u8(0))
}
}
}
/// The DWARF data found in `.debug_loc` and `.debug_loclists` sections.
#[derive(Debug, Default, Clone, Copy)]
pub struct LocationLists<R> {
debug_loc: DebugLoc<R>,
debug_loclists: DebugLocLists<R>,
}
impl<R> LocationLists<R> {
/// Construct a new `LocationLists` instance from the data in the `.debug_loc` and
/// `.debug_loclists` sections.
pub fn new(debug_loc: DebugLoc<R>, debug_loclists: DebugLocLists<R>) -> LocationLists<R> {
LocationLists {
debug_loc,
debug_loclists,
}
}
}
impl<T> LocationLists<T> {
/// Create a `LocationLists` that references the data in `self`.
///
/// This is useful when `R` implements `Reader` but `T` does not.
///
/// Used by `Dwarf::borrow`.
pub fn borrow<'a, F, R>(&'a self, mut borrow: F) -> LocationLists<R>
where
F: FnMut(&'a T) -> R,
{
LocationLists {
debug_loc: borrow(&self.debug_loc.section).into(),
debug_loclists: borrow(&self.debug_loclists.section).into(),
}
}
}
impl<R: Reader> LocationLists<R> {
/// Iterate over the `LocationListEntry`s starting at the given offset.
///
/// The `unit_encoding` must match the compilation unit that the
/// offset was contained in.
///
/// The `base_address` should be obtained from the `DW_AT_low_pc` attribute in the
/// `DW_TAG_compile_unit` entry for the compilation unit that contains this location
/// list.
///
/// Can be [used with
/// `FallibleIterator`](./index.html#using-with-fallibleiterator).
pub fn locations(
&self,
offset: LocationListsOffset<R::Offset>,
unit_encoding: Encoding,
base_address: u64,
debug_addr: &DebugAddr<R>,
debug_addr_base: DebugAddrBase<R::Offset>,
) -> Result<LocListIter<R>> {
Ok(LocListIter::new(
self.raw_locations(offset, unit_encoding)?,
base_address,
debug_addr.clone(),
debug_addr_base,
))
}
/// Similar to `locations`, but with special handling for .dwo files.
/// This should only been used when this `LocationLists` was loaded from a
/// .dwo file.
pub fn locations_dwo(
&self,
offset: LocationListsOffset<R::Offset>,
unit_encoding: Encoding,
base_address: u64,
debug_addr: &DebugAddr<R>,
debug_addr_base: DebugAddrBase<R::Offset>,
) -> Result<LocListIter<R>> {
Ok(LocListIter::new(
self.raw_locations_dwo(offset, unit_encoding)?,
base_address,
debug_addr.clone(),
debug_addr_base,
))
}
/// Iterate over the raw `LocationListEntry`s starting at the given offset.
///
/// The `unit_encoding` must match the compilation unit that the
/// offset was contained in.
///
/// This iterator does not perform any processing of the location entries,
/// such as handling base addresses.
///
/// Can be [used with
/// `FallibleIterator`](./index.html#using-with-fallibleiterator).
pub fn raw_locations(
&self,
offset: LocationListsOffset<R::Offset>,
unit_encoding: Encoding,
) -> Result<RawLocListIter<R>> {
let (mut input, format) = if unit_encoding.version <= 4 {
(self.debug_loc.section.clone(), LocListsFormat::Bare)
} else {
(self.debug_loclists.section.clone(), LocListsFormat::Lle)
};
input.skip(offset.0)?;
Ok(RawLocListIter::new(input, unit_encoding, format))
}
/// Similar to `raw_locations`, but with special handling for .dwo files.
/// This should only been used when this `LocationLists` was loaded from a
/// .dwo file.
pub fn raw_locations_dwo(
&self,
offset: LocationListsOffset<R::Offset>,
unit_encoding: Encoding,
) -> Result<RawLocListIter<R>> {
let mut input = if unit_encoding.version <= 4 {
// In the GNU split dwarf extension the locations are present in the
// .debug_loc section but are encoded with the DW_LLE values used
// for the DWARF 5 .debug_loclists section.
self.debug_loc.section.clone()
} else {
self.debug_loclists.section.clone()
};
input.skip(offset.0)?;
Ok(RawLocListIter::new(
input,
unit_encoding,
LocListsFormat::Lle,
))
}
/// Returns the `.debug_loclists` offset at the given `base` and `index`.
///
/// The `base` must be the `DW_AT_loclists_base` value from the compilation unit DIE.
/// This is an offset that points to the first entry following the header.
///
/// The `index` is the value of a `DW_FORM_loclistx` attribute.
pub fn get_offset(
&self,
unit_encoding: Encoding,
base: DebugLocListsBase<R::Offset>,
index: DebugLocListsIndex<R::Offset>,
) -> Result<LocationListsOffset<R::Offset>> {
let format = unit_encoding.format;
let input = &mut self.debug_loclists.section.clone();
input.skip(base.0)?;
input.skip(R::Offset::from_u64(
index.0.into_u64() * u64::from(format.word_size()),
)?)?;
input
.read_offset(format)
.map(|x| LocationListsOffset(base.0 + x))
}
/// Call `Reader::lookup_offset_id` for each section, and return the first match.
pub fn lookup_offset_id(&self, id: ReaderOffsetId) -> Option<(SectionId, R::Offset)> {
self.debug_loc
.lookup_offset_id(id)
.or_else(|| self.debug_loclists.lookup_offset_id(id))
}
}
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
enum LocListsFormat {
/// The bare location list format used before DWARF 5.
Bare,
/// The DW_LLE encoded range list format used in DWARF 5 and the non-standard GNU
/// split dwarf extension.
Lle,
}
/// A raw iterator over a location list.
///
/// This iterator does not perform any processing of the location entries,
/// such as handling base addresses.
#[derive(Debug)]
pub struct RawLocListIter<R: Reader> {
input: R,
encoding: Encoding,
format: LocListsFormat,
}
/// A raw entry in .debug_loclists.
#[derive(Clone, Debug)]
pub enum RawLocListEntry<R: Reader> {
/// A location from DWARF version <= 4.
AddressOrOffsetPair {
/// Start of range. May be an address or an offset.
begin: u64,
/// End of range. May be an address or an offset.
end: u64,
/// expression
data: Expression<R>,
},
/// DW_LLE_base_address
BaseAddress {
/// base address
addr: u64,
},
/// DW_LLE_base_addressx
BaseAddressx {
/// base address
addr: DebugAddrIndex<R::Offset>,
},
/// DW_LLE_startx_endx
StartxEndx {
/// start of range
begin: DebugAddrIndex<R::Offset>,
/// end of range
end: DebugAddrIndex<R::Offset>,
/// expression
data: Expression<R>,
},
/// DW_LLE_startx_length
StartxLength {
/// start of range
begin: DebugAddrIndex<R::Offset>,
/// length of range
length: u64,
/// expression
data: Expression<R>,
},
/// DW_LLE_offset_pair
OffsetPair {
/// start of range
begin: u64,
/// end of range
end: u64,
/// expression
data: Expression<R>,
},
/// DW_LLE_default_location
DefaultLocation {
/// expression
data: Expression<R>,
},
/// DW_LLE_start_end
StartEnd {
/// start of range
begin: u64,
/// end of range
end: u64,
/// expression
data: Expression<R>,
},
/// DW_LLE_start_length
StartLength {
/// start of range
begin: u64,
/// length of range
length: u64,
/// expression
data: Expression<R>,
},
}
fn parse_data<R: Reader>(input: &mut R, encoding: Encoding) -> Result<Expression<R>> {
if encoding.version >= 5 {
let len = R::Offset::from_u64(input.read_uleb128()?)?;
Ok(Expression(input.split(len)?))
} else {
// In the GNU split-dwarf extension this is a fixed 2 byte value.
let len = R::Offset::from_u16(input.read_u16()?);
Ok(Expression(input.split(len)?))
}
}
impl<R: Reader> RawLocListEntry<R> {
/// Parse a location list entry from `.debug_loclists`
fn parse(input: &mut R, encoding: Encoding, format: LocListsFormat) -> Result<Option<Self>> {
Ok(match format {
LocListsFormat::Bare => {
let range = RawRange::parse(input, encoding.address_size)?;
if range.is_end() {
None
} else if range.is_base_address(encoding.address_size) {
Some(RawLocListEntry::BaseAddress { addr: range.end })
} else {
let len = R::Offset::from_u16(input.read_u16()?);
let data = Expression(input.split(len)?);
Some(RawLocListEntry::AddressOrOffsetPair {
begin: range.begin,
end: range.end,
data,
})
}
}
LocListsFormat::Lle => match constants::DwLle(input.read_u8()?) {
constants::DW_LLE_end_of_list => None,
constants::DW_LLE_base_addressx => Some(RawLocListEntry::BaseAddressx {
addr: DebugAddrIndex(input.read_uleb128().and_then(R::Offset::from_u64)?),
}),
constants::DW_LLE_startx_endx => Some(RawLocListEntry::StartxEndx {
begin: DebugAddrIndex(input.read_uleb128().and_then(R::Offset::from_u64)?),
end: DebugAddrIndex(input.read_uleb128().and_then(R::Offset::from_u64)?),
data: parse_data(input, encoding)?,
}),
constants::DW_LLE_startx_length => Some(RawLocListEntry::StartxLength {
begin: DebugAddrIndex(input.read_uleb128().and_then(R::Offset::from_u64)?),
length: if encoding.version >= 5 {
input.read_uleb128()?
} else {
// In the GNU split-dwarf extension this is a fixed 4 byte value.
input.read_u32()? as u64
},
data: parse_data(input, encoding)?,
}),
constants::DW_LLE_offset_pair => Some(RawLocListEntry::OffsetPair {
begin: input.read_uleb128()?,
end: input.read_uleb128()?,
data: parse_data(input, encoding)?,
}),
constants::DW_LLE_default_location => Some(RawLocListEntry::DefaultLocation {
data: parse_data(input, encoding)?,
}),
constants::DW_LLE_base_address => Some(RawLocListEntry::BaseAddress {
addr: input.read_address(encoding.address_size)?,
}),
constants::DW_LLE_start_end => Some(RawLocListEntry::StartEnd {
begin: input.read_address(encoding.address_size)?,
end: input.read_address(encoding.address_size)?,
data: parse_data(input, encoding)?,
}),
constants::DW_LLE_start_length => Some(RawLocListEntry::StartLength {
begin: input.read_address(encoding.address_size)?,
length: input.read_uleb128()?,
data: parse_data(input, encoding)?,
}),
entry => {
return Err(Error::UnknownLocListsEntry(entry));
}
},
})
}
}
impl<R: Reader> RawLocListIter<R> {
/// Construct a `RawLocListIter`.
fn new(input: R, encoding: Encoding, format: LocListsFormat) -> RawLocListIter<R> {
RawLocListIter {
input,
encoding,
format,
}
}
/// Advance the iterator to the next location.
pub fn next(&mut self) -> Result<Option<RawLocListEntry<R>>> {
if self.input.is_empty() {
return Ok(None);
}
match RawLocListEntry::parse(&mut self.input, self.encoding, self.format) {
Ok(entry) => {
if entry.is_none() {
self.input.empty();
}
Ok(entry)
}
Err(e) => {
self.input.empty();
Err(e)
}
}
}
}
#[cfg(feature = "fallible-iterator")]
impl<R: Reader> fallible_iterator::FallibleIterator for RawLocListIter<R> {
type Item = RawLocListEntry<R>;
type Error = Error;
fn next(&mut self) -> ::core::result::Result<Option<Self::Item>, Self::Error> {
RawLocListIter::next(self)
}
}
/// An iterator over a location list.
///
/// This iterator internally handles processing of base address selection entries
/// and list end entries. Thus, it only returns location entries that are valid
/// and already adjusted for the base address.
#[derive(Debug)]
pub struct LocListIter<R: Reader> {
raw: RawLocListIter<R>,
base_address: u64,
debug_addr: DebugAddr<R>,
debug_addr_base: DebugAddrBase<R::Offset>,
}
impl<R: Reader> LocListIter<R> {
/// Construct a `LocListIter`.
fn new(
raw: RawLocListIter<R>,
base_address: u64,
debug_addr: DebugAddr<R>,
debug_addr_base: DebugAddrBase<R::Offset>,
) -> LocListIter<R> {
LocListIter {
raw,
base_address,
debug_addr,
debug_addr_base,
}
}
#[inline]
fn get_address(&self, index: DebugAddrIndex<R::Offset>) -> Result<u64> {
self.debug_addr
.get_address(self.raw.encoding.address_size, self.debug_addr_base, index)
}
/// Advance the iterator to the next location.
pub fn next(&mut self) -> Result<Option<LocationListEntry<R>>> {
loop {
let raw_loc = match self.raw.next()? {
Some(loc) => loc,
None => return Ok(None),
};
let loc = self.convert_raw(raw_loc)?;
if loc.is_some() {
return Ok(loc);
}
}
}
/// Return the next raw location.
///
/// The raw location should be passed to `convert_raw`.
#[doc(hidden)]
pub fn next_raw(&mut self) -> Result<Option<RawLocListEntry<R>>> {
self.raw.next()
}
/// Convert a raw location into a location, and update the state of the iterator.
///
/// The raw location should have been obtained from `next_raw`.
#[doc(hidden)]
pub fn convert_raw(
&mut self,
raw_loc: RawLocListEntry<R>,
) -> Result<Option<LocationListEntry<R>>> {
let mask = !0 >> (64 - self.raw.encoding.address_size * 8);
let tombstone = if self.raw.encoding.version <= 4 {
mask - 1
} else {
mask
};
let (range, data) = match raw_loc {
RawLocListEntry::BaseAddress { addr } => {
self.base_address = addr;
return Ok(None);
}
RawLocListEntry::BaseAddressx { addr } => {
self.base_address = self.get_address(addr)?;
return Ok(None);
}
RawLocListEntry::StartxEndx { begin, end, data } => {
let begin = self.get_address(begin)?;
let end = self.get_address(end)?;
(Range { begin, end }, data)
}
RawLocListEntry::StartxLength {
begin,
length,
data,
} => {
let begin = self.get_address(begin)?;
let end = begin.wrapping_add(length) & mask;
(Range { begin, end }, data)
}
RawLocListEntry::DefaultLocation { data } => (
Range {
begin: 0,
end: u64::max_value(),
},
data,
),
RawLocListEntry::AddressOrOffsetPair { begin, end, data }
| RawLocListEntry::OffsetPair { begin, end, data } => {
if self.base_address == tombstone {
return Ok(None);
}
let mut range = Range { begin, end };
range.add_base_address(self.base_address, self.raw.encoding.address_size);
(range, data)
}
RawLocListEntry::StartEnd { begin, end, data } => (Range { begin, end }, data),
RawLocListEntry::StartLength {
begin,
length,
data,
} => {
let end = begin.wrapping_add(length) & mask;
(Range { begin, end }, data)
}
};
if range.begin == tombstone || range.begin > range.end {
return Ok(None);
}
Ok(Some(LocationListEntry { range, data }))
}
}
#[cfg(feature = "fallible-iterator")]
impl<R: Reader> fallible_iterator::FallibleIterator for LocListIter<R> {
type Item = LocationListEntry<R>;
type Error = Error;
fn next(&mut self) -> ::core::result::Result<Option<Self::Item>, Self::Error> {
LocListIter::next(self)
}
}
/// A location list entry from the `.debug_loc` or `.debug_loclists` sections.
#[derive(Debug, Clone, Copy, PartialEq, Eq, Hash)]
pub struct LocationListEntry<R: Reader> {
/// The address range that this location is valid for.
pub range: Range,
/// The data containing a single location description.
pub data: Expression<R>,
}
#[cfg(test)]
mod tests {
use super::*;
use crate::common::Format;
use crate::endianity::LittleEndian;
use crate::read::{EndianSlice, Range};
use crate::test_util::GimliSectionMethods;
use test_assembler::{Endian, Label, LabelMaker, Section};
#[test]
fn test_loclists_32() {
let tombstone = !0u32;
let encoding = Encoding {
format: Format::Dwarf32,
version: 5,
address_size: 4,
};
let section = Section::with_endian(Endian::Little)
.L32(0x0300_0000)
.L32(0x0301_0300)
.L32(0x0301_0400)
.L32(0x0301_0500)
.L32(tombstone)
.L32(0x0301_0600);
let buf = section.get_contents().unwrap();
let debug_addr = &DebugAddr::from(EndianSlice::new(&buf, LittleEndian));
let debug_addr_base = DebugAddrBase(0);
let start = Label::new();
let first = Label::new();
let size = Label::new();
#[rustfmt::skip]
let section = Section::with_endian(Endian::Little)
// Header
.mark(&start)
.L32(&size)
.L16(encoding.version)
.L8(encoding.address_size)
.L8(0)
.L32(0)
.mark(&first)
// OffsetPair
.L8(4).uleb(0x10200).uleb(0x10300).uleb(4).L32(2)
// A base address selection followed by an OffsetPair.
.L8(6).L32(0x0200_0000)
.L8(4).uleb(0x10400).uleb(0x10500).uleb(4).L32(3)
// An empty OffsetPair followed by a normal OffsetPair.
.L8(4).uleb(0x10600).uleb(0x10600).uleb(4).L32(4)
.L8(4).uleb(0x10800).uleb(0x10900).uleb(4).L32(5)
// A StartEnd
.L8(7).L32(0x201_0a00).L32(0x201_0b00).uleb(4).L32(6)
// A StartLength
.L8(8).L32(0x201_0c00).uleb(0x100).uleb(4).L32(7)
// An OffsetPair that starts at 0.
.L8(4).uleb(0).uleb(1).uleb(4).L32(8)
// An OffsetPair that ends at -1.
.L8(6).L32(0)
.L8(4).uleb(0).uleb(0xffff_ffff).uleb(4).L32(9)
// A DefaultLocation
.L8(5).uleb(4).L32(10)
// A BaseAddressx + OffsetPair
.L8(1).uleb(0)
.L8(4).uleb(0x10100).uleb(0x10200).uleb(4).L32(11)
// A StartxEndx
.L8(2).uleb(1).uleb(2).uleb(4).L32(12)
// A StartxLength
.L8(3).uleb(3).uleb(0x100).uleb(4).L32(13)
// Tombstone entries, all of which should be ignored.
// A BaseAddressx that is a tombstone.
.L8(1).uleb(4)
.L8(4).uleb(0x11100).uleb(0x11200).uleb(4).L32(20)
// A BaseAddress that is a tombstone.
.L8(6).L32(tombstone)
.L8(4).uleb(0x11300).uleb(0x11400).uleb(4).L32(21)
// A StartxEndx that is a tombstone.
.L8(2).uleb(4).uleb(5).uleb(4).L32(22)
// A StartxLength that is a tombstone.
.L8(3).uleb(4).uleb(0x100).uleb(4).L32(23)
// A StartEnd that is a tombstone.
.L8(7).L32(tombstone).L32(0x201_1500).uleb(4).L32(24)
// A StartLength that is a tombstone.
.L8(8).L32(tombstone).uleb(0x100).uleb(4).L32(25)
// A StartEnd (not ignored)
.L8(7).L32(0x201_1600).L32(0x201_1700).uleb(4).L32(26)
// A range end.
.L8(0)
// Some extra data.
.L32(0xffff_ffff);
size.set_const((§ion.here() - &start - 4) as u64);
let buf = section.get_contents().unwrap();
let debug_loc = DebugLoc::new(&[], LittleEndian);
let debug_loclists = DebugLocLists::new(&buf, LittleEndian);
let loclists = LocationLists::new(debug_loc, debug_loclists);
let offset = LocationListsOffset((&first - &start) as usize);
let mut locations = loclists
.locations(offset, encoding, 0x0100_0000, debug_addr, debug_addr_base)
.unwrap();
// A normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0101_0200,
end: 0x0101_0300,
},
data: Expression(EndianSlice::new(&[2, 0, 0, 0], LittleEndian)),
}))
);
// A base address selection followed by a normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0400,
end: 0x0201_0500,
},
data: Expression(EndianSlice::new(&[3, 0, 0, 0], LittleEndian)),
}))
);
// An empty location range followed by a normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0600,
end: 0x0201_0600,
},
data: Expression(EndianSlice::new(&[4, 0, 0, 0], LittleEndian)),
}))
);
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0800,
end: 0x0201_0900,
},
data: Expression(EndianSlice::new(&[5, 0, 0, 0], LittleEndian)),
}))
);
// A normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0a00,
end: 0x0201_0b00,
},
data: Expression(EndianSlice::new(&[6, 0, 0, 0], LittleEndian)),
}))
);
// A normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0c00,
end: 0x0201_0d00,
},
data: Expression(EndianSlice::new(&[7, 0, 0, 0], LittleEndian)),
}))
);
// A location range that starts at 0.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0200_0000,
end: 0x0200_0001,
},
data: Expression(EndianSlice::new(&[8, 0, 0, 0], LittleEndian)),
}))
);
// A location range that ends at -1.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0000_0000,
end: 0xffff_ffff,
},
data: Expression(EndianSlice::new(&[9, 0, 0, 0], LittleEndian)),
}))
);
// A DefaultLocation.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0,
end: u64::max_value(),
},
data: Expression(EndianSlice::new(&[10, 0, 0, 0], LittleEndian)),
}))
);
// A BaseAddressx + OffsetPair
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0301_0100,
end: 0x0301_0200,
},
data: Expression(EndianSlice::new(&[11, 0, 0, 0], LittleEndian)),
}))
);
// A StartxEndx
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0301_0300,
end: 0x0301_0400,
},
data: Expression(EndianSlice::new(&[12, 0, 0, 0], LittleEndian)),
}))
);
// A StartxLength
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0301_0500,
end: 0x0301_0600,
},
data: Expression(EndianSlice::new(&[13, 0, 0, 0], LittleEndian)),
}))
);
// A StartEnd location following the tombstones
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_1600,
end: 0x0201_1700,
},
data: Expression(EndianSlice::new(&[26, 0, 0, 0], LittleEndian)),
}))
);
// A location list end.
assert_eq!(locations.next(), Ok(None));
// An offset at the end of buf.
let mut locations = loclists
.locations(
LocationListsOffset(buf.len()),
encoding,
0x0100_0000,
debug_addr,
debug_addr_base,
)
.unwrap();
assert_eq!(locations.next(), Ok(None));
}
#[test]
fn test_loclists_64() {
let tombstone = !0u64;
let encoding = Encoding {
format: Format::Dwarf64,
version: 5,
address_size: 8,
};
let section = Section::with_endian(Endian::Little)
.L64(0x0300_0000)
.L64(0x0301_0300)
.L64(0x0301_0400)
.L64(0x0301_0500)
.L64(tombstone)
.L64(0x0301_0600);
let buf = section.get_contents().unwrap();
let debug_addr = &DebugAddr::from(EndianSlice::new(&buf, LittleEndian));
let debug_addr_base = DebugAddrBase(0);
let start = Label::new();
let first = Label::new();
let size = Label::new();
#[rustfmt::skip]
let section = Section::with_endian(Endian::Little)
// Header
.mark(&start)
.L32(0xffff_ffff)
.L64(&size)
.L16(encoding.version)
.L8(encoding.address_size)
.L8(0)
.L32(0)
.mark(&first)
// OffsetPair
.L8(4).uleb(0x10200).uleb(0x10300).uleb(4).L32(2)
// A base address selection followed by an OffsetPair.
.L8(6).L64(0x0200_0000)
.L8(4).uleb(0x10400).uleb(0x10500).uleb(4).L32(3)
// An empty OffsetPair followed by a normal OffsetPair.
.L8(4).uleb(0x10600).uleb(0x10600).uleb(4).L32(4)
.L8(4).uleb(0x10800).uleb(0x10900).uleb(4).L32(5)
// A StartEnd
.L8(7).L64(0x201_0a00).L64(0x201_0b00).uleb(4).L32(6)
// A StartLength
.L8(8).L64(0x201_0c00).uleb(0x100).uleb(4).L32(7)
// An OffsetPair that starts at 0.
.L8(4).uleb(0).uleb(1).uleb(4).L32(8)
// An OffsetPair that ends at -1.
.L8(6).L64(0)
.L8(4).uleb(0).uleb(0xffff_ffff).uleb(4).L32(9)
// A DefaultLocation
.L8(5).uleb(4).L32(10)
// A BaseAddressx + OffsetPair
.L8(1).uleb(0)
.L8(4).uleb(0x10100).uleb(0x10200).uleb(4).L32(11)
// A StartxEndx
.L8(2).uleb(1).uleb(2).uleb(4).L32(12)
// A StartxLength
.L8(3).uleb(3).uleb(0x100).uleb(4).L32(13)
// Tombstone entries, all of which should be ignored.
// A BaseAddressx that is a tombstone.
.L8(1).uleb(4)
.L8(4).uleb(0x11100).uleb(0x11200).uleb(4).L32(20)
// A BaseAddress that is a tombstone.
.L8(6).L64(tombstone)
.L8(4).uleb(0x11300).uleb(0x11400).uleb(4).L32(21)
// A StartxEndx that is a tombstone.
.L8(2).uleb(4).uleb(5).uleb(4).L32(22)
// A StartxLength that is a tombstone.
.L8(3).uleb(4).uleb(0x100).uleb(4).L32(23)
// A StartEnd that is a tombstone.
.L8(7).L64(tombstone).L64(0x201_1500).uleb(4).L32(24)
// A StartLength that is a tombstone.
.L8(8).L64(tombstone).uleb(0x100).uleb(4).L32(25)
// A StartEnd (not ignored)
.L8(7).L64(0x201_1600).L64(0x201_1700).uleb(4).L32(26)
// A range end.
.L8(0)
// Some extra data.
.L32(0xffff_ffff);
size.set_const((§ion.here() - &start - 12) as u64);
let buf = section.get_contents().unwrap();
let debug_loc = DebugLoc::new(&[], LittleEndian);
let debug_loclists = DebugLocLists::new(&buf, LittleEndian);
let loclists = LocationLists::new(debug_loc, debug_loclists);
let offset = LocationListsOffset((&first - &start) as usize);
let mut locations = loclists
.locations(offset, encoding, 0x0100_0000, debug_addr, debug_addr_base)
.unwrap();
// A normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0101_0200,
end: 0x0101_0300,
},
data: Expression(EndianSlice::new(&[2, 0, 0, 0], LittleEndian)),
}))
);
// A base address selection followed by a normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0400,
end: 0x0201_0500,
},
data: Expression(EndianSlice::new(&[3, 0, 0, 0], LittleEndian)),
}))
);
// An empty location range followed by a normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0600,
end: 0x0201_0600,
},
data: Expression(EndianSlice::new(&[4, 0, 0, 0], LittleEndian)),
}))
);
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0800,
end: 0x0201_0900,
},
data: Expression(EndianSlice::new(&[5, 0, 0, 0], LittleEndian)),
}))
);
// A normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0a00,
end: 0x0201_0b00,
},
data: Expression(EndianSlice::new(&[6, 0, 0, 0], LittleEndian)),
}))
);
// A normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0c00,
end: 0x0201_0d00,
},
data: Expression(EndianSlice::new(&[7, 0, 0, 0], LittleEndian)),
}))
);
// A location range that starts at 0.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0200_0000,
end: 0x0200_0001,
},
data: Expression(EndianSlice::new(&[8, 0, 0, 0], LittleEndian)),
}))
);
// A location range that ends at -1.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0000_0000,
end: 0xffff_ffff,
},
data: Expression(EndianSlice::new(&[9, 0, 0, 0], LittleEndian)),
}))
);
// A DefaultLocation.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0,
end: u64::max_value(),
},
data: Expression(EndianSlice::new(&[10, 0, 0, 0], LittleEndian)),
}))
);
// A BaseAddressx + OffsetPair
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0301_0100,
end: 0x0301_0200,
},
data: Expression(EndianSlice::new(&[11, 0, 0, 0], LittleEndian)),
}))
);
// A StartxEndx
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0301_0300,
end: 0x0301_0400,
},
data: Expression(EndianSlice::new(&[12, 0, 0, 0], LittleEndian)),
}))
);
// A StartxLength
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0301_0500,
end: 0x0301_0600,
},
data: Expression(EndianSlice::new(&[13, 0, 0, 0], LittleEndian)),
}))
);
// A StartEnd location following the tombstones
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_1600,
end: 0x0201_1700,
},
data: Expression(EndianSlice::new(&[26, 0, 0, 0], LittleEndian)),
}))
);
// A location list end.
assert_eq!(locations.next(), Ok(None));
// An offset at the end of buf.
let mut locations = loclists
.locations(
LocationListsOffset(buf.len()),
encoding,
0x0100_0000,
debug_addr,
debug_addr_base,
)
.unwrap();
assert_eq!(locations.next(), Ok(None));
}
#[test]
fn test_location_list_32() {
let tombstone = !0u32 - 1;
let start = Label::new();
let first = Label::new();
#[rustfmt::skip]
let section = Section::with_endian(Endian::Little)
// A location before the offset.
.mark(&start)
.L32(0x10000).L32(0x10100).L16(4).L32(1)
.mark(&first)
// A normal location.
.L32(0x10200).L32(0x10300).L16(4).L32(2)
// A base address selection followed by a normal location.
.L32(0xffff_ffff).L32(0x0200_0000)
.L32(0x10400).L32(0x10500).L16(4).L32(3)
// An empty location range followed by a normal location.
.L32(0x10600).L32(0x10600).L16(4).L32(4)
.L32(0x10800).L32(0x10900).L16(4).L32(5)
// A location range that starts at 0.
.L32(0).L32(1).L16(4).L32(6)
// A location range that ends at -1.
.L32(0xffff_ffff).L32(0x0000_0000)
.L32(0).L32(0xffff_ffff).L16(4).L32(7)
// A normal location with tombstone.
.L32(tombstone).L32(tombstone).L16(4).L32(8)
// A base address selection with tombstone followed by a normal location.
.L32(0xffff_ffff).L32(tombstone)
.L32(0x10a00).L32(0x10b00).L16(4).L32(9)
// A location list end.
.L32(0).L32(0)
// Some extra data.
.L32(0);
let buf = section.get_contents().unwrap();
let debug_loc = DebugLoc::new(&buf, LittleEndian);
let debug_loclists = DebugLocLists::new(&[], LittleEndian);
let loclists = LocationLists::new(debug_loc, debug_loclists);
let offset = LocationListsOffset((&first - &start) as usize);
let debug_addr = &DebugAddr::from(EndianSlice::new(&[], LittleEndian));
let debug_addr_base = DebugAddrBase(0);
let encoding = Encoding {
format: Format::Dwarf32,
version: 4,
address_size: 4,
};
let mut locations = loclists
.locations(offset, encoding, 0x0100_0000, debug_addr, debug_addr_base)
.unwrap();
// A normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0101_0200,
end: 0x0101_0300,
},
data: Expression(EndianSlice::new(&[2, 0, 0, 0], LittleEndian)),
}))
);
// A base address selection followed by a normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0400,
end: 0x0201_0500,
},
data: Expression(EndianSlice::new(&[3, 0, 0, 0], LittleEndian)),
}))
);
// An empty location range followed by a normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0600,
end: 0x0201_0600,
},
data: Expression(EndianSlice::new(&[4, 0, 0, 0], LittleEndian)),
}))
);
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0800,
end: 0x0201_0900,
},
data: Expression(EndianSlice::new(&[5, 0, 0, 0], LittleEndian)),
}))
);
// A location range that starts at 0.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0200_0000,
end: 0x0200_0001,
},
data: Expression(EndianSlice::new(&[6, 0, 0, 0], LittleEndian)),
}))
);
// A location range that ends at -1.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0000_0000,
end: 0xffff_ffff,
},
data: Expression(EndianSlice::new(&[7, 0, 0, 0], LittleEndian)),
}))
);
// A location list end.
assert_eq!(locations.next(), Ok(None));
// An offset at the end of buf.
let mut locations = loclists
.locations(
LocationListsOffset(buf.len()),
encoding,
0x0100_0000,
debug_addr,
debug_addr_base,
)
.unwrap();
assert_eq!(locations.next(), Ok(None));
}
#[test]
fn test_location_list_64() {
let tombstone = !0u64 - 1;
let start = Label::new();
let first = Label::new();
#[rustfmt::skip]
let section = Section::with_endian(Endian::Little)
// A location before the offset.
.mark(&start)
.L64(0x10000).L64(0x10100).L16(4).L32(1)
.mark(&first)
// A normal location.
.L64(0x10200).L64(0x10300).L16(4).L32(2)
// A base address selection followed by a normal location.
.L64(0xffff_ffff_ffff_ffff).L64(0x0200_0000)
.L64(0x10400).L64(0x10500).L16(4).L32(3)
// An empty location range followed by a normal location.
.L64(0x10600).L64(0x10600).L16(4).L32(4)
.L64(0x10800).L64(0x10900).L16(4).L32(5)
// A location range that starts at 0.
.L64(0).L64(1).L16(4).L32(6)
// A location range that ends at -1.
.L64(0xffff_ffff_ffff_ffff).L64(0x0000_0000)
.L64(0).L64(0xffff_ffff_ffff_ffff).L16(4).L32(7)
// A normal location with tombstone.
.L64(tombstone).L64(tombstone).L16(4).L32(8)
// A base address selection with tombstone followed by a normal location.
.L64(0xffff_ffff_ffff_ffff).L64(tombstone)
.L64(0x10a00).L64(0x10b00).L16(4).L32(9)
// A location list end.
.L64(0).L64(0)
// Some extra data.
.L64(0);
let buf = section.get_contents().unwrap();
let debug_loc = DebugLoc::new(&buf, LittleEndian);
let debug_loclists = DebugLocLists::new(&[], LittleEndian);
let loclists = LocationLists::new(debug_loc, debug_loclists);
let offset = LocationListsOffset((&first - &start) as usize);
let debug_addr = &DebugAddr::from(EndianSlice::new(&[], LittleEndian));
let debug_addr_base = DebugAddrBase(0);
let encoding = Encoding {
format: Format::Dwarf64,
version: 4,
address_size: 8,
};
let mut locations = loclists
.locations(offset, encoding, 0x0100_0000, debug_addr, debug_addr_base)
.unwrap();
// A normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0101_0200,
end: 0x0101_0300,
},
data: Expression(EndianSlice::new(&[2, 0, 0, 0], LittleEndian)),
}))
);
// A base address selection followed by a normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0400,
end: 0x0201_0500,
},
data: Expression(EndianSlice::new(&[3, 0, 0, 0], LittleEndian)),
}))
);
// An empty location range followed by a normal location.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0600,
end: 0x0201_0600,
},
data: Expression(EndianSlice::new(&[4, 0, 0, 0], LittleEndian)),
}))
);
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0201_0800,
end: 0x0201_0900,
},
data: Expression(EndianSlice::new(&[5, 0, 0, 0], LittleEndian)),
}))
);
// A location range that starts at 0.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0200_0000,
end: 0x0200_0001,
},
data: Expression(EndianSlice::new(&[6, 0, 0, 0], LittleEndian)),
}))
);
// A location range that ends at -1.
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0,
end: 0xffff_ffff_ffff_ffff,
},
data: Expression(EndianSlice::new(&[7, 0, 0, 0], LittleEndian)),
}))
);
// A location list end.
assert_eq!(locations.next(), Ok(None));
// An offset at the end of buf.
let mut locations = loclists
.locations(
LocationListsOffset(buf.len()),
encoding,
0x0100_0000,
debug_addr,
debug_addr_base,
)
.unwrap();
assert_eq!(locations.next(), Ok(None));
}
#[test]
fn test_locations_invalid() {
#[rustfmt::skip]
let section = Section::with_endian(Endian::Little)
// An invalid location range.
.L32(0x20000).L32(0x10000).L16(4).L32(1)
// An invalid range after wrapping.
.L32(0x20000).L32(0xff01_0000).L16(4).L32(2);
let buf = section.get_contents().unwrap();
let debug_loc = DebugLoc::new(&buf, LittleEndian);
let debug_loclists = DebugLocLists::new(&[], LittleEndian);
let loclists = LocationLists::new(debug_loc, debug_loclists);
let debug_addr = &DebugAddr::from(EndianSlice::new(&[], LittleEndian));
let debug_addr_base = DebugAddrBase(0);
let encoding = Encoding {
format: Format::Dwarf32,
version: 4,
address_size: 4,
};
// An invalid location range.
let mut locations = loclists
.locations(
LocationListsOffset(0x0),
encoding,
0x0100_0000,
debug_addr,
debug_addr_base,
)
.unwrap();
assert_eq!(locations.next(), Ok(None));
// An invalid location range after wrapping.
let mut locations = loclists
.locations(
LocationListsOffset(14),
encoding,
0x0100_0000,
debug_addr,
debug_addr_base,
)
.unwrap();
assert_eq!(locations.next(), Ok(None));
// An invalid offset.
match loclists.locations(
LocationListsOffset(buf.len() + 1),
encoding,
0x0100_0000,
debug_addr,
debug_addr_base,
) {
Err(Error::UnexpectedEof(_)) => {}
otherwise => panic!("Unexpected result: {:?}", otherwise),
}
}
#[test]
fn test_get_offset() {
for format in [Format::Dwarf32, Format::Dwarf64] {
let encoding = Encoding {
format,
version: 5,
address_size: 4,
};
let zero = Label::new();
let length = Label::new();
let start = Label::new();
let first = Label::new();
let end = Label::new();
let mut section = Section::with_endian(Endian::Little)
.mark(&zero)
.initial_length(format, &length, &start)
.D16(encoding.version)
.D8(encoding.address_size)
.D8(0)
.D32(20)
.mark(&first);
for i in 0..20 {
section = section.word(format.word_size(), 1000 + i);
}
section = section.mark(&end);
length.set_const((&end - &start) as u64);
let section = section.get_contents().unwrap();
let debug_loc = DebugLoc::from(EndianSlice::new(&[], LittleEndian));
let debug_loclists = DebugLocLists::from(EndianSlice::new(§ion, LittleEndian));
let locations = LocationLists::new(debug_loc, debug_loclists);
let base = DebugLocListsBase((&first - &zero) as usize);
assert_eq!(
locations.get_offset(encoding, base, DebugLocListsIndex(0)),
Ok(LocationListsOffset(base.0 + 1000))
);
assert_eq!(
locations.get_offset(encoding, base, DebugLocListsIndex(19)),
Ok(LocationListsOffset(base.0 + 1019))
);
}
}
#[test]
fn test_loclists_gnu_v4_split_dwarf() {
#[rustfmt::skip]
let buf = [
0x03, // DW_LLE_startx_length
0x00, // ULEB encoded b7
0x08, 0x00, 0x00, 0x00, // Fixed 4 byte length of 8
0x03, 0x00, // Fixed two byte length of the location
0x11, 0x00, // DW_OP_constu 0
0x9f, // DW_OP_stack_value
// Padding data
//0x99, 0x99, 0x99, 0x99
];
let data_buf = [0x11, 0x00, 0x9f];
let expected_data = EndianSlice::new(&data_buf, LittleEndian);
let debug_loc = DebugLoc::new(&buf, LittleEndian);
let debug_loclists = DebugLocLists::new(&[], LittleEndian);
let loclists = LocationLists::new(debug_loc, debug_loclists);
let debug_addr =
&DebugAddr::from(EndianSlice::new(&[0x01, 0x02, 0x03, 0x04], LittleEndian));
let debug_addr_base = DebugAddrBase(0);
let encoding = Encoding {
format: Format::Dwarf32,
version: 4,
address_size: 4,
};
// An invalid location range.
let mut locations = loclists
.locations_dwo(
LocationListsOffset(0x0),
encoding,
0,
debug_addr,
debug_addr_base,
)
.unwrap();
assert_eq!(
locations.next(),
Ok(Some(LocationListEntry {
range: Range {
begin: 0x0403_0201,
end: 0x0403_0209
},
data: Expression(expected_data),
}))
);
}
}