| data |
|
|
| head_maillocal.js |
@implements {nsIMsgCopyServiceListener} |
5847 |
| test_bug457168.js |
Protocol tests for POP3.
|
3982 |
| test_duplicateKey.js |
Any copyright is dedicated to the Public Domain.
http://creativecommons.org/publicdomain/zero/1.0/ |
2469 |
| test_fileName.js |
Test handling of special chars in folder names
|
4441 |
| test_folderLoaded.js |
The intent of this file is to show a folder loaded event after a load
with a null database.
|
2529 |
| test_folderParse.js |
Tests to check local folder parsing.
|
2494 |
| test_localFolder.js |
nsIMsgFolder.subFolders tests
These tests intend to test pluggableStore.discoverSubFolders
and nsIMsgFolder.hasSubFolders.
|
4333 |
| test_mailboxContentLength.js |
Test content length for the mailbox protocol. This focuses on necko URLs
that are run externally.
|
3507 |
| test_mailboxProtocol.js |
Test suite for getting mailbox urls via the protocol handler.
|
1560 |
| test_mailboxURL.js |
Tests for mailbox: URLs.
|
2596 |
| test_mailStoreCompact.js |
Tests for nsIMsgPluggableStore compaction support.
Tests _only_ the mailstore side - no folder/db involvement!
|
8776 |
| test_mailStoreEnvData.js |
Test that messages without a "Date:" header are assigned a sensible
default, and that it is preserved by folder repair.
|
3020 |
| test_mboxMalformed.js |
Tests to check our mbox reading is forgiving enough to be tolerant of
malformed mboxes in unambiguous cases.
|
5537 |
| test_msgCopy.js |
|
807 |
| test_msgIDParsing.js |
Test bug 676916 - nsParseMailbox parses multi-line message-id header incorrectly
|
688 |
| test_noTop.js |
A handler with no TOP support.
|
1576 |
| test_noUidl.js |
A handler with no UIDL support.
|
2299 |
| test_nsIMsgLocalMailFolder.js |
Test suite for local folder functions.
|
10036 |
| test_nsIMsgParseMailMsgState.js |
|
1463 |
| test_nsIMsgPluggableStore.js |
nsIMsgPluggableStore interface tests
|
2366 |
| test_over2GBMailboxes.js |
Test of accessing over 2 GiB local folder. |
4019 |
| test_over4GBMailboxes.js |
Test to ensure that operations around the 4GiB folder size boundary work correctly.
This test only works for mbox format mail folders.
Some of the tests will be removed when support for over 4GiB folders is enabled by default.
The test functions are executed in this order:
- run_test
- ParseListener_run_test
- downloadUnder4GiB
- downloadOver4GiB_fail
- downloadOver4GiB_success
- downloadOver4GiB_success_check
- copyIntoOver4GiB_fail
- copyIntoOver4GiB_fail_check
- copyIntoOver4GiB_success
- copyIntoOver4GiB_success_check1
- copyIntoOver4GiB_success_check2
- compactOver4GiB
- CompactListener_compactOver4GiB
- compactUnder4GiB
- CompactListener_compactUnder4GiB
|
21031 |
| test_pop3AuthMethods.js |
Login tests for POP3
Test code <copied from="test_pop3GetNewMail.js">
|
5472 |
| test_Pop3Channel.js |
Test Pop3Channel can download a partial message correctly.
|
2383 |
| test_pop3Client.js |
Test when alwaysSTARTTLS is set, but the server doesn't support STARTTLS,
should abort after CAPA response.
|
3600 |
| test_pop3Download.js |
Test that pop3 download code and message storage works correctly.
|
4976 |
| test_pop3DownloadTempFileHandling.js |
The intent of this file is to test temp file handling when
downloading multiple pop3 messages with quarantining turned on.
Original author: David Bienvenu <dbienvenu@mozilla.com>
|
1761 |
| test_pop3Duplicates.js |
The intent of this file is to test duplicate handling options
in the pop3 download code.
|
1066 |
| test_pop3FilterActions.js |
This file tests that a pop3 add tag filter writes the new tag
into the message keywords header. It also tests marking read,
and flagging messages.
Original author: David Bienvenu <dbienvenu@mozilla.com>
|
5032 |
| test_pop3Filters.js |
Inject a message to the server and do a GetNewMail for the incomingServer.
|
3449 |
| test_pop3GetNewMail.js |
Protocol tests for POP3.
|
3294 |
| test_pop3GSSAPIFail.js |
A server offers GSSAPI (Kerberos), but auth fails, due to client or server.
This mainly tests whether we use the correct login mode.
Whether it fails due to
- client not set up
- client ticket expired / not logged in
- server not being set up properly
makes no difference to Thunderbird, as that's all hidden in the gssapi-Library
from the OS. So, the server here just returning err is a good approximation
of reality of the above cases.
Actually, we (more precisely the OS GSSAPI lib) fail out of band
in the Kerberos protocol, before the AUTH GSSAPI command is even issued.
@author Ben Bucksch
|
5775 |
| test_pop3MoveFilter.js |
This file tests that a pop3 move filter doesn't leave the
original message in the inbox.
Original author: David Bienvenu <dbienvenu@mozilla.com>
|
4588 |
| test_pop3MoveFilter2.js |
This file tests that a pop3 move filter doesn't reuse msg hdr
info from previous moves.
Original author: David Bienvenu <dbienvenu@mozilla.com>
|
3745 |
| test_pop3MultiCopy.js |
Any copyright is dedicated to the Public Domain.
http://creativecommons.org/publicdomain/zero/1.0/ |
2936 |
| test_pop3MultiCopy2.js |
Any copyright is dedicated to the Public Domain.
http://creativecommons.org/publicdomain/zero/1.0/ |
5599 |
| test_pop3Password.js |
Authentication tests for POP3.
|
3912 |
| test_pop3Password3.js |
Extra tests for POP3 passwords (forgetPassword)
|
2481 |
| test_pop3PasswordFailure_rfc1939.js |
Tests password failure with RFC1939.
This test checks to see if the pop3 password failure is handled correctly.
The steps are:
- Have an invalid password in the password database.
- Check we get a prompt asking what to do.
- Check retry does what it should do.
- Check cancel does what it should do.
- Re-initiate connection, this time select enter new password, check that
we get a new password prompt and can enter the password.
|
5892 |
| test_pop3PasswordFailure_rfc2449.js |
Tests password failure with RFC2449 auth.
This test checks to see if the pop3 password failure is handled correctly.
The steps are:
- Have an invalid password in the password database.
- Check we get a prompt asking what to do.
- Check retry does what it should do.
- Check cancel does what it should do.
- Re-initiate connection, this time select enter new password, check that
we get a new password prompt and can enter the password.
|
5848 |
| test_pop3PasswordFailure_rfc5034.js |
Tests password failure with RFC5034 auth.
This test checks to see if the pop3 password failure is handled correctly
in the case of the server dropping the connection during auth login.
We use POP3_RFC5034_handler so auth=login will be supported.
The steps are:
- Have an invalid password in the password database.
- Check we get a prompt asking what to do.
- Check retry does what it should do.
- Check cancel does what it should do.
- Re-initiate connection, this time select enter new password, check that
we get a new password prompt and can enter the password.
|
6032 |
| test_pop3Proxy.js |
Any copyright is dedicated to the Public Domain.
http://creativecommons.org/publicdomain/zero/1.0/ |
1826 |
| test_pop3Pump.js |
The intent of this file is to demonstrate a minimal
POP3 unit test using the testing file POP3Pump.js
|
1025 |
| test_pop3ServerBrokenCRAMDisconnect.js |
Server which advertises CRAM-MD5, but is impolite enough to just
disconnect (close the TCP connection) when we try it.
This is a tough one, because we may lose state on which auth schemes
are allowed and which ones failed and may restart from scratch, and
retry, never skipping the failed scheme.
Dear server implementors, NEVER DO THAT! Be polite, give an error
with explanation and by all means keep the connection open.
I don't know if real servers do that, but bienvenu says they exist.
TODO:
This test shows that the current situation is not good.
Problems:
- We should reopen the connection, remember which auth scheme failed
and start with the next in list, not trying the broken one again.
We currently neither retry nor remember.
- incomingServer thinks it is still running/busy although the connection is
clearly done and over.
@author Ben Bucksch
|
3876 |
| test_pop3ServerBrokenCRAMFail.js |
Server which advertises CRAM-MD5, but fails when it's tried.
This reportedly happens for some misconfigured servers.
|
3112 |
| test_preview.js |
|
1534 |
| test_saveMessage.js |
Test bug 460636 - Saving message in local folder as .EML removes starting dot in all lines, and ignores line if single dot only line.
|
2559 |
| test_streamHeaders.js |
This mainly tests that streamHeaders does not result in the crash
of bug 752768
adapted from test_pop3Pump.js by Kent James <kent@caspia.com>
|
2781 |
| test_undoDelete.js |
|
2497 |
| test_verifyLogon.js |
This test checks to see if the pop3 verify logon handles password failure correctly.
The steps are:
- Set an invalid password on the server object.
- Check that verifyLogon fails
|
2715 |
| xpcshell.ini |
|
1523 |