cord.h - mozsearch

// Copyright 2020 The Abseil Authors.

//

// Licensed under the Apache License, Version 2.0 (the "License");

// you may not use this file except in compliance with the License.

// You may obtain a copy of the License at

//

//      https://www.apache.org/licenses/LICENSE-2.0

//

// Unless required by applicable law or agreed to in writing, software

// distributed under the License is distributed on an "AS IS" BASIS,

// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

// See the License for the specific language governing permissions and

// limitations under the License.

//

// -----------------------------------------------------------------------------

// File: cord.h

// -----------------------------------------------------------------------------

//

// This file defines the `absl::Cord` data structure and operations on that data

// structure. A Cord is a string-like sequence of characters optimized for

// specific use cases. Unlike a `std::string`, which stores an array of

// contiguous characters, Cord data is stored in a structure consisting of

// separate, reference-counted "chunks."

//

// Because a Cord consists of these chunks, data can be added to or removed from

// a Cord during its lifetime. Chunks may also be shared between Cords. Unlike a

// `std::string`, a Cord can therefore accommodate data that changes over its

// lifetime, though it's not quite "mutable"; it can change only in the

// attachment, detachment, or rearrangement of chunks of its constituent data.

//

// A Cord provides some benefit over `std::string` under the following (albeit

// narrow) circumstances:

//

//   * Cord data is designed to grow and shrink over a Cord's lifetime. Cord

//     provides efficient insertions and deletions at the start and end of the

//     character sequences, avoiding copies in those cases. Static data should

//     generally be stored as strings.

//   * External memory consisting of string-like data can be directly added to

//     a Cord without requiring copies or allocations.

//   * Cord data may be shared and copied cheaply. Cord provides a copy-on-write

//     implementation and cheap sub-Cord operations. Copying a Cord is an O(1)

//     operation.

//

// As a consequence to the above, Cord data is generally large. Small data

// should generally use strings, as construction of a Cord requires some

// overhead. Small Cords (<= 15 bytes) are represented inline, but most small

// Cords are expected to grow over their lifetimes.

//

// Note that because a Cord is made up of separate chunked data, random access

// to character data within a Cord is slower than within a `std::string`.

//

// Thread Safety

//

// Cord has the same thread-safety properties as many other types like

// std::string, std::vector<>, int, etc -- it is thread-compatible. In

// particular, if threads do not call non-const methods, then it is safe to call

// const methods without synchronization. Copying a Cord produces a new instance

// that can be used concurrently with the original in arbitrary ways.

#ifndef ABSL_STRINGS_CORD_H_

#define ABSL_STRINGS_CORD_H_

#include <algorithm>

#include <cstddef>

#include <cstdint>

#include <cstring>

#include <iosfwd>

#include <iterator>

#include <string>

#include <type_traits>

#include "absl/base/attributes.h"

#include "absl/base/config.h"

#include "absl/base/internal/endian.h"

#include "absl/base/internal/per_thread_tls.h"

#include "absl/base/macros.h"

#include "absl/base/port.h"

#include "absl/container/inlined_vector.h"

#include "absl/crc/internal/crc_cord_state.h"

#include "absl/functional/function_ref.h"

#include "absl/meta/type_traits.h"

#include "absl/strings/cord_analysis.h"

#include "absl/strings/cord_buffer.h"

#include "absl/strings/internal/cord_data_edge.h"

#include "absl/strings/internal/cord_internal.h"

#include "absl/strings/internal/cord_rep_btree.h"

#include "absl/strings/internal/cord_rep_btree_reader.h"

#include "absl/strings/internal/cord_rep_crc.h"

#include "absl/strings/internal/cordz_functions.h"

#include "absl/strings/internal/cordz_info.h"

#include "absl/strings/internal/cordz_statistics.h"

#include "absl/strings/internal/cordz_update_scope.h"

#include "absl/strings/internal/cordz_update_tracker.h"

#include "absl/strings/internal/resize_uninitialized.h"

#include "absl/strings/internal/string_constant.h"

#include "absl/strings/string_view.h"

#include "absl/types/optional.h"

namespace absl {

ABSL_NAMESPACE_BEGIN

class Cord;

class CordTestPeer;

template <typename Releaser>

Cord MakeCordFromExternal(absl::string_view, Releaser&&);

void CopyCordToString(const Cord& src, std::string* dst);

// Cord memory accounting modes

enum class CordMemoryAccounting {

  // Counts the *approximate* number of bytes held in full or in part by this

  // Cord (which may not remain the same between invocations). Cords that share

  // memory could each be "charged" independently for the same shared memory.

  // See also comment on `kTotalMorePrecise` on internally shared memory.

  kTotal,

  // Counts the *approximate* number of bytes held in full or in part by this

  // Cord for the distinct memory held by this cord. This option is similar

  // to `kTotal`, except that if the cord has multiple references to the same

  // memory, that memory is only counted once.

//

  // For example:

  //   absl::Cord cord;

  //   cord.append(some_other_cord);

  //   cord.append(some_other_cord);

  //   // Counts `some_other_cord` twice:

  //   cord.EstimatedMemoryUsage(kTotal);

  //   // Counts `some_other_cord` once:

  //   cord.EstimatedMemoryUsage(kTotalMorePrecise);

//

  // The `kTotalMorePrecise` number is more expensive to compute as it requires

  // deduplicating all memory references. Applications should prefer to use

  // `kFairShare` or `kTotal` unless they really need a more precise estimate

  // on "how much memory is potentially held / kept alive by this cord?"

  kTotalMorePrecise,

  // Counts the *approximate* number of bytes held in full or in part by this

  // Cord weighted by the sharing ratio of that data. For example, if some data

  // edge is shared by 4 different Cords, then each cord is attributed 1/4th of

  // the total memory usage as a 'fair share' of the total memory usage.

  kFairShare,

};

// Cord

//

// A Cord is a sequence of characters, designed to be more efficient than a

// `std::string` in certain circumstances: namely, large string data that needs

// to change over its lifetime or shared, especially when such data is shared

// across API boundaries.

//

// A Cord stores its character data in a structure that allows efficient prepend

// and append operations. This makes a Cord useful for large string data sent

// over in a wire format that may need to be prepended or appended at some point

// during the data exchange (e.g. HTTP, protocol buffers). For example, a

// Cord is useful for storing an HTTP request, and prepending an HTTP header to

// such a request.

//

// Cords should not be used for storing general string data, however. They

// require overhead to construct and are slower than strings for random access.

//

// The Cord API provides the following common API operations:

//

// * Create or assign Cords out of existing string data, memory, or other Cords

// * Append and prepend data to an existing Cord

// * Create new Sub-Cords from existing Cord data

// * Swap Cord data and compare Cord equality

// * Write out Cord data by constructing a `std::string`

//

// Additionally, the API provides iterator utilities to iterate through Cord

// data via chunks or character bytes.

//

class Cord {

 private:

  template <typename T>

  using EnableIfString =

      absl::enable_if_t<std::is_same<T, std::string>::value, int>;

 public:

  // Cord::Cord() Constructors.

  // Creates an empty Cord.

  constexpr Cord() noexcept;

  // Creates a Cord from an existing Cord. Cord is copyable and efficiently

  // movable. The moved-from state is valid but unspecified.

  Cord(const Cord& src);

  Cord(Cord&& src) noexcept;

  Cord& operator=(const Cord& x);

  Cord& operator=(Cord&& x) noexcept;

  // Creates a Cord from a `src` string. This constructor is marked explicit to

  // prevent implicit Cord constructions from arguments convertible to an

  // `absl::string_view`.

  explicit Cord(absl::string_view src);

  Cord& operator=(absl::string_view src);

  // Creates a Cord from a `std::string&&` rvalue. These constructors are

  // templated to avoid ambiguities for types that are convertible to both

  // `absl::string_view` and `std::string`, such as `const char*`.

  template <typename T, EnableIfString<T> = 0>

  explicit Cord(T&& src);

  template <typename T, EnableIfString<T> = 0>

  Cord& operator=(T&& src);

  // Cord::~Cord()

//

  // Destructs the Cord.

  ~Cord() {

    if (contents_.is_tree()) DestroyCordSlow();

  // MakeCordFromExternal()

//

  // Creates a Cord that takes ownership of external string memory. The

  // contents of `data` are not copied to the Cord; instead, the external

  // memory is added to the Cord and reference-counted. This data may not be

  // changed for the life of the Cord, though it may be prepended or appended

  // to.

//

  // `MakeCordFromExternal()` takes a callable "releaser" that is invoked when

  // the reference count for `data` reaches zero. As noted above, this data must

  // remain live until the releaser is invoked. The callable releaser also must:

//

  //   * be move constructible

  //   * support `void operator()(absl::string_view) const` or `void operator()`

//

  // Example:

//

  // Cord MakeCord(BlockPool* pool) {

  //   Block* block = pool->NewBlock();

  //   FillBlock(block);

  //   return absl::MakeCordFromExternal(

  //       block->ToStringView(),

  //       [pool, block](absl::string_view v) {

  //         pool->FreeBlock(block, v);

  //       });

  // }

//

  // WARNING: Because a Cord can be reference-counted, it's likely a bug if your

  // releaser doesn't do anything. For example, consider the following:

//

  // void Foo(const char* buffer, int len) {

  //   auto c = absl::MakeCordFromExternal(absl::string_view(buffer, len),

  //                                       [](absl::string_view) {});

//

  //   // BUG: If Bar() copies its cord for any reason, including keeping a

  //   // substring of it, the lifetime of buffer might be extended beyond

  //   // when Foo() returns.

  //   Bar(c);

  // }

  template <typename Releaser>

  friend Cord MakeCordFromExternal(absl::string_view data, Releaser&& releaser);

  // Cord::Clear()

//

  // Releases the Cord data. Any nodes that share data with other Cords, if

  // applicable, will have their reference counts reduced by 1.

  ABSL_ATTRIBUTE_REINITIALIZES void Clear();

  // Cord::Append()

//

  // Appends data to the Cord, which may come from another Cord or other string

  // data.

  void Append(const Cord& src);

  void Append(Cord&& src);

  void Append(absl::string_view src);

  template <typename T, EnableIfString<T> = 0>

  void Append(T&& src);

  // Appends `buffer` to this cord, unless `buffer` has a zero length in which

  // case this method has no effect on this cord instance.

  // This method is guaranteed to consume `buffer`.

  void Append(CordBuffer buffer);

  // Returns a CordBuffer, re-using potential existing capacity in this cord.

//

  // Cord instances may have additional unused capacity in the last (or first)

  // nodes of the underlying tree to facilitate amortized growth. This method

  // allows applications to explicitly use this spare capacity if available,

  // or create a new CordBuffer instance otherwise.

  // If this cord has a final non-shared node with at least `min_capacity`

  // available, then this method will return that buffer including its data

  // contents. I.e.; the returned buffer will have a non-zero length, and

  // a capacity of at least `buffer.length + min_capacity`. Otherwise, this

  // method will return `CordBuffer::CreateWithDefaultLimit(capacity)`.

//

  // Below an example of using GetAppendBuffer. Notice that in this example we

  // use `GetAppendBuffer()` only on the first iteration. As we know nothing

  // about any initial extra capacity in `cord`, we may be able to use the extra

  // capacity. But as we add new buffers with fully utilized contents after that

  // we avoid calling `GetAppendBuffer()` on subsequent iterations: while this

  // works fine, it results in an unnecessary inspection of cord contents:

//

  //   void AppendRandomDataToCord(absl::Cord &cord, size_t n) {

  //     bool first = true;

  //     while (n > 0) {

  //       CordBuffer buffer = first ? cord.GetAppendBuffer(n)

  //                                 : CordBuffer::CreateWithDefaultLimit(n);

  //       absl::Span<char> data = buffer.available_up_to(n);

  //       FillRandomValues(data.data(), data.size());

  //       buffer.IncreaseLengthBy(data.size());

  //       cord.Append(std::move(buffer));

  //       n -= data.size();

  //       first = false;

  //     }

  //   }

  CordBuffer GetAppendBuffer(size_t capacity, size_t min_capacity = 16);

  // Returns a CordBuffer, re-using potential existing capacity in this cord.

//

  // This function is identical to `GetAppendBuffer`, except that in the case

  // where a new `CordBuffer` is allocated, it is allocated using the provided

  // custom limit instead of the default limit. `GetAppendBuffer` will default

  // to `CordBuffer::CreateWithDefaultLimit(capacity)` whereas this method

  // will default to `CordBuffer::CreateWithCustomLimit(block_size, capacity)`.

  // This method is equivalent to `GetAppendBuffer` if `block_size` is zero.

  // See the documentation for `CreateWithCustomLimit` for more details on the

  // restrictions and legal values for `block_size`.

  CordBuffer GetCustomAppendBuffer(size_t block_size, size_t capacity,

                                   size_t min_capacity = 16);

  // Cord::Prepend()

//

  // Prepends data to the Cord, which may come from another Cord or other string

  // data.

  void Prepend(const Cord& src);

  void Prepend(absl::string_view src);

  template <typename T, EnableIfString<T> = 0>

  void Prepend(T&& src);

  // Prepends `buffer` to this cord, unless `buffer` has a zero length in which

  // case this method has no effect on this cord instance.

  // This method is guaranteed to consume `buffer`.

  void Prepend(CordBuffer buffer);

  // Cord::RemovePrefix()

//

  // Removes the first `n` bytes of a Cord.

  void RemovePrefix(size_t n);

  void RemoveSuffix(size_t n);

  // Cord::Subcord()

//

  // Returns a new Cord representing the subrange [pos, pos + new_size) of

  // *this. If pos >= size(), the result is empty(). If

  // (pos + new_size) >= size(), the result is the subrange [pos, size()).

  Cord Subcord(size_t pos, size_t new_size) const;

  // Cord::swap()

//

  // Swaps the contents of the Cord with `other`.

  void swap(Cord& other) noexcept;

  // swap()

//

  // Swaps the contents of two Cords.

  friend void swap(Cord& x, Cord& y) noexcept { x.swap(y); }

  // Cord::size()

//

  // Returns the size of the Cord.

  size_t size() const;

  // Cord::empty()

//

  // Determines whether the given Cord is empty, returning `true` is so.

  bool empty() const;

  // Cord::EstimatedMemoryUsage()

//

  // Returns the *approximate* number of bytes held by this cord.

  // See CordMemoryAccounting for more information on the accounting method.

  size_t EstimatedMemoryUsage(CordMemoryAccounting accounting_method =

                                  CordMemoryAccounting::kTotal) const;

  // Cord::Compare()

//

  // Compares 'this' Cord with rhs. This function and its relatives treat Cords

  // as sequences of unsigned bytes. The comparison is a straightforward

  // lexicographic comparison. `Cord::Compare()` returns values as follows:

//

  //   -1  'this' Cord is smaller

  //    0  two Cords are equal

  //    1  'this' Cord is larger

  int Compare(absl::string_view rhs) const;

  int Compare(const Cord& rhs) const;

  // Cord::StartsWith()

//

  // Determines whether the Cord starts with the passed string data `rhs`.

  bool StartsWith(const Cord& rhs) const;

  bool StartsWith(absl::string_view rhs) const;

  // Cord::EndsWith()

//

  // Determines whether the Cord ends with the passed string data `rhs`.

  bool EndsWith(absl::string_view rhs) const;

  bool EndsWith(const Cord& rhs) const;

  // Cord::Contains()

//

  // Determines whether the Cord contains the passed string data `rhs`.

  bool Contains(absl::string_view rhs) const;

  bool Contains(const Cord& rhs) const;

  // Cord::operator std::string()

//

  // Converts a Cord into a `std::string()`. This operator is marked explicit to

  // prevent unintended Cord usage in functions that take a string.

  explicit operator std::string() const;

  // CopyCordToString()

//

  // Copies the contents of a `src` Cord into a `*dst` string.

//

  // This function optimizes the case of reusing the destination string since it

  // can reuse previously allocated capacity. However, this function does not

  // guarantee that pointers previously returned by `dst->data()` remain valid

  // even if `*dst` had enough capacity to hold `src`. If `*dst` is a new

  // object, prefer to simply use the conversion operator to `std::string`.

  friend void CopyCordToString(const Cord& src, std::string* dst);

  class CharIterator;

  //----------------------------------------------------------------------------

  // Cord::ChunkIterator

  //----------------------------------------------------------------------------

//

  // A `Cord::ChunkIterator` allows iteration over the constituent chunks of its

  // Cord. Such iteration allows you to perform non-const operations on the data

  // of a Cord without modifying it.

//

  // Generally, you do not instantiate a `Cord::ChunkIterator` directly;

  // instead, you create one implicitly through use of the `Cord::Chunks()`

  // member function.

//

  // The `Cord::ChunkIterator` has the following properties:

//

  //   * The iterator is invalidated after any non-const operation on the

  //     Cord object over which it iterates.

  //   * The `string_view` returned by dereferencing a valid, non-`end()`

  //     iterator is guaranteed to be non-empty.

  //   * Two `ChunkIterator` objects can be compared equal if and only if they

  //     remain valid and iterate over the same Cord.

  //   * The iterator in this case is a proxy iterator; the `string_view`

  //     returned by the iterator does not live inside the Cord, and its

  //     lifetime is limited to the lifetime of the iterator itself. To help

  //     prevent lifetime issues, `ChunkIterator::reference` is not a true

  //     reference type and is equivalent to `value_type`.

  //   * The iterator keeps state that can grow for Cords that contain many

  //     nodes and are imbalanced due to sharing. Prefer to pass this type by

  //     const reference instead of by value.

  class ChunkIterator {

   public:

    using iterator_category = std::input_iterator_tag;

    using value_type = absl::string_view;

    using difference_type = ptrdiff_t;

    using pointer = const value_type*;

    using reference = value_type;

    ChunkIterator() = default;

    ChunkIterator& operator++();

    ChunkIterator operator++(int);

    bool operator==(const ChunkIterator& other) const;

    bool operator!=(const ChunkIterator& other) const;

    reference operator*() const;

    pointer operator->() const;

    friend class Cord;

    friend class CharIterator;

   private:

    using CordRep = absl::cord_internal::CordRep;

    using CordRepBtree = absl::cord_internal::CordRepBtree;

    using CordRepBtreeReader = absl::cord_internal::CordRepBtreeReader;

    // Constructs a `begin()` iterator from `tree`. `tree` must not be null.

    explicit ChunkIterator(cord_internal::CordRep* tree);

    // Constructs a `begin()` iterator from `cord`.

    explicit ChunkIterator(const Cord* cord);

    // Initializes this instance from a tree. Invoked by constructors.

    void InitTree(cord_internal::CordRep* tree);

    // Removes `n` bytes from `current_chunk_`. Expects `n` to be smaller than

    // `current_chunk_.size()`.

    void RemoveChunkPrefix(size_t n);

    Cord AdvanceAndReadBytes(size_t n);

    void AdvanceBytes(size_t n);

    // Btree specific operator++

    ChunkIterator& AdvanceBtree();

    void AdvanceBytesBtree(size_t n);

    // A view into bytes of the current `CordRep`. It may only be a view to a

    // suffix of bytes if this is being used by `CharIterator`.

    absl::string_view current_chunk_;

    // The current leaf, or `nullptr` if the iterator points to short data.

    // If the current chunk is a substring node, current_leaf_ points to the

    // underlying flat or external node.

    absl::cord_internal::CordRep* current_leaf_ = nullptr;

    // The number of bytes left in the `Cord` over which we are iterating.

    size_t bytes_remaining_ = 0;

    // Cord reader for cord btrees. Empty if not traversing a btree.

    CordRepBtreeReader btree_reader_;

};

  // Cord::chunk_begin()

//

  // Returns an iterator to the first chunk of the `Cord`.

//

  // Generally, prefer using `Cord::Chunks()` within a range-based for loop for

  // iterating over the chunks of a Cord. This method may be useful for getting

  // a `ChunkIterator` where range-based for-loops are not useful.

//

  // Example:

//

  //   absl::Cord::ChunkIterator FindAsChunk(const absl::Cord& c,

  //                                         absl::string_view s) {

  //     return std::find(c.chunk_begin(), c.chunk_end(), s);

  //   }

  ChunkIterator chunk_begin() const ABSL_ATTRIBUTE_LIFETIME_BOUND;

  // Cord::chunk_end()

//

  // Returns an iterator one increment past the last chunk of the `Cord`.

//

  // Generally, prefer using `Cord::Chunks()` within a range-based for loop for

  // iterating over the chunks of a Cord. This method may be useful for getting

  // a `ChunkIterator` where range-based for-loops may not be available.

  ChunkIterator chunk_end() const ABSL_ATTRIBUTE_LIFETIME_BOUND;

  //----------------------------------------------------------------------------

  // Cord::ChunkRange

  //----------------------------------------------------------------------------

//

  // `ChunkRange` is a helper class for iterating over the chunks of the `Cord`,

  // producing an iterator which can be used within a range-based for loop.

  // Construction of a `ChunkRange` will return an iterator pointing to the

  // first chunk of the Cord. Generally, do not construct a `ChunkRange`

  // directly; instead, prefer to use the `Cord::Chunks()` method.

//

  // Implementation note: `ChunkRange` is simply a convenience wrapper over

  // `Cord::chunk_begin()` and `Cord::chunk_end()`.

  class ChunkRange {

   public:

    // Fulfill minimum c++ container requirements [container.requirements]

    // These (partial) container type definitions allow ChunkRange to be used

    // in various utilities expecting a subset of [container.requirements].

    // For example, the below enables using `::testing::ElementsAre(...)`

    using value_type = absl::string_view;

    using reference = value_type&;

    using const_reference = const value_type&;

    using iterator = ChunkIterator;

    using const_iterator = ChunkIterator;

    explicit ChunkRange(const Cord* cord) : cord_(cord) {}

    ChunkIterator begin() const;

    ChunkIterator end() const;

   private:

    const Cord* cord_;

};

  // Cord::Chunks()

//

  // Returns a `Cord::ChunkRange` for iterating over the chunks of a `Cord` with

  // a range-based for-loop. For most iteration tasks on a Cord, use

  // `Cord::Chunks()` to retrieve this iterator.

//

  // Example:

//

  //   void ProcessChunks(const Cord& cord) {

  //     for (absl::string_view chunk : cord.Chunks()) { ... }

  //   }

//

  // Note that the ordinary caveats of temporary lifetime extension apply:

//

  //   void Process() {

  //     for (absl::string_view chunk : CordFactory().Chunks()) {

  //       // The temporary Cord returned by CordFactory has been destroyed!

  //     }

  //   }

  ChunkRange Chunks() const ABSL_ATTRIBUTE_LIFETIME_BOUND;

  //----------------------------------------------------------------------------

  // Cord::CharIterator

  //----------------------------------------------------------------------------

//

  // A `Cord::CharIterator` allows iteration over the constituent characters of

  // a `Cord`.

//

  // Generally, you do not instantiate a `Cord::CharIterator` directly; instead,

  // you create one implicitly through use of the `Cord::Chars()` member

  // function.

//

  // A `Cord::CharIterator` has the following properties:

//

  //   * The iterator is invalidated after any non-const operation on the

  //     Cord object over which it iterates.

  //   * Two `CharIterator` objects can be compared equal if and only if they

  //     remain valid and iterate over the same Cord.

  //   * The iterator keeps state that can grow for Cords that contain many

  //     nodes and are imbalanced due to sharing. Prefer to pass this type by

  //     const reference instead of by value.

  //   * This type cannot act as a forward iterator because a `Cord` can reuse

  //     sections of memory. This fact violates the requirement for forward

  //     iterators to compare equal if dereferencing them returns the same

  //     object.

  class CharIterator {

   public:

    using iterator_category = std::input_iterator_tag;

    using value_type = char;

    using difference_type = ptrdiff_t;

    using pointer = const char*;

    using reference = const char&;

    CharIterator() = default;

    CharIterator& operator++();

    CharIterator operator++(int);

    bool operator==(const CharIterator& other) const;

    bool operator!=(const CharIterator& other) const;

    reference operator*() const;

    pointer operator->() const;

    friend Cord;

   private:

    explicit CharIterator(const Cord* cord) : chunk_iterator_(cord) {}

    ChunkIterator chunk_iterator_;

};

  // Cord::AdvanceAndRead()

//

  // Advances the `Cord::CharIterator` by `n_bytes` and returns the bytes

  // advanced as a separate `Cord`. `n_bytes` must be less than or equal to the

  // number of bytes within the Cord; otherwise, behavior is undefined. It is

  // valid to pass `char_end()` and `0`.

  static Cord AdvanceAndRead(CharIterator* it, size_t n_bytes);

  // Cord::Advance()

//

  // Advances the `Cord::CharIterator` by `n_bytes`. `n_bytes` must be less than

  // or equal to the number of bytes remaining within the Cord; otherwise,

  // behavior is undefined. It is valid to pass `char_end()` and `0`.

  static void Advance(CharIterator* it, size_t n_bytes);

  // Cord::ChunkRemaining()

//

  // Returns the longest contiguous view starting at the iterator's position.

//

  // `it` must be dereferenceable.

  static absl::string_view ChunkRemaining(const CharIterator& it);

  // Cord::char_begin()

//

  // Returns an iterator to the first character of the `Cord`.

//

  // Generally, prefer using `Cord::Chars()` within a range-based for loop for

  // iterating over the chunks of a Cord. This method may be useful for getting

  // a `CharIterator` where range-based for-loops may not be available.

  CharIterator char_begin() const ABSL_ATTRIBUTE_LIFETIME_BOUND;

  // Cord::char_end()

//

  // Returns an iterator to one past the last character of the `Cord`.

//

  // Generally, prefer using `Cord::Chars()` within a range-based for loop for

  // iterating over the chunks of a Cord. This method may be useful for getting

  // a `CharIterator` where range-based for-loops are not useful.

  CharIterator char_end() const ABSL_ATTRIBUTE_LIFETIME_BOUND;

  // Cord::CharRange

//

  // `CharRange` is a helper class for iterating over the characters of a

  // producing an iterator which can be used within a range-based for loop.

  // Construction of a `CharRange` will return an iterator pointing to the first

  // character of the Cord. Generally, do not construct a `CharRange` directly;

  // instead, prefer to use the `Cord::Chars()` method shown below.

//

  // Implementation note: `CharRange` is simply a convenience wrapper over

  // `Cord::char_begin()` and `Cord::char_end()`.

  class CharRange {

   public:

    // Fulfill minimum c++ container requirements [container.requirements]

    // These (partial) container type definitions allow CharRange to be used

    // in various utilities expecting a subset of [container.requirements].

    // For example, the below enables using `::testing::ElementsAre(...)`

    using value_type = char;

    using reference = value_type&;

    using const_reference = const value_type&;

    using iterator = CharIterator;

    using const_iterator = CharIterator;

    explicit CharRange(const Cord* cord) : cord_(cord) {}

    CharIterator begin() const;

    CharIterator end() const;

   private:

    const Cord* cord_;

};

  // Cord::Chars()

//

  // Returns a `Cord::CharRange` for iterating over the characters of a `Cord`

  // with a range-based for-loop. For most character-based iteration tasks on a

  // Cord, use `Cord::Chars()` to retrieve this iterator.

//

  // Example:

//

  //   void ProcessCord(const Cord& cord) {

  //     for (char c : cord.Chars()) { ... }

  //   }

//

  // Note that the ordinary caveats of temporary lifetime extension apply:

//

  //   void Process() {

  //     for (char c : CordFactory().Chars()) {

  //       // The temporary Cord returned by CordFactory has been destroyed!

  //     }

  //   }

  CharRange Chars() const ABSL_ATTRIBUTE_LIFETIME_BOUND;

  // Cord::operator[]

//

  // Gets the "i"th character of the Cord and returns it, provided that

  // 0 <= i < Cord.size().

//

  // NOTE: This routine is reasonably efficient. It is roughly

  // logarithmic based on the number of chunks that make up the cord. Still,

  // if you need to iterate over the contents of a cord, you should

  // use a CharIterator/ChunkIterator rather than call operator[] or Get()

  // repeatedly in a loop.

  char operator[](size_t i) const;

  // Cord::TryFlat()

//

  // If this cord's representation is a single flat array, returns a

  // string_view referencing that array.  Otherwise returns nullopt.

  absl::optional<absl::string_view> TryFlat() const

      ABSL_ATTRIBUTE_LIFETIME_BOUND;

  // Cord::Flatten()

//

  // Flattens the cord into a single array and returns a view of the data.

//

  // If the cord was already flat, the contents are not modified.

  absl::string_view Flatten() ABSL_ATTRIBUTE_LIFETIME_BOUND;

  // Cord::Find()

//

  // Returns an iterator to the first occurrance of the substring `needle`.

//

  // If the substring `needle` does not occur, `Cord::char_end()` is returned.

  CharIterator Find(absl::string_view needle) const;

  CharIterator Find(const absl::Cord& needle) const;

  // Supports absl::Cord as a sink object for absl::Format().

  friend void AbslFormatFlush(absl::Cord* cord, absl::string_view part) {

    cord->Append(part);

  // Cord::SetExpectedChecksum()

//

  // Stores a checksum value with this non-empty cord instance, for later

  // retrieval.

//

  // The expected checksum is a number stored out-of-band, alongside the data.

  // It is preserved across copies and assignments, but any mutations to a cord

  // will cause it to lose its expected checksum.

//

  // The expected checksum is not part of a Cord's value, and does not affect

  // operations such as equality or hashing.

//

  // This field is intended to store a CRC32C checksum for later validation, to

  // help support end-to-end checksum workflows.  However, the Cord API itself

  // does no CRC validation, and assigns no meaning to this number.

//

  // This call has no effect if this cord is empty.

  void SetExpectedChecksum(uint32_t crc);

  // Returns this cord's expected checksum, if it has one.  Otherwise, returns

  // nullopt.

  absl::optional<uint32_t> ExpectedChecksum() const;

  template <typename H>

  friend H AbslHashValue(H hash_state, const absl::Cord& c) {

    absl::optional<absl::string_view> maybe_flat = c.TryFlat();

    if (maybe_flat.has_value()) {

      return H::combine(std::move(hash_state), *maybe_flat);

    return c.HashFragmented(std::move(hash_state));

  // Create a Cord with the contents of StringConstant<T>::value.

  // No allocations will be done and no data will be copied.

  // This is an INTERNAL API and subject to change or removal. This API can only

  // be used by spelling absl::strings_internal::MakeStringConstant, which is

  // also an internal API.

  template <typename T>

  // NOLINTNEXTLINE(google-explicit-constructor)

  constexpr Cord(strings_internal::StringConstant<T>);

 private:

  using CordRep = absl::cord_internal::CordRep;

  using CordRepFlat = absl::cord_internal::CordRepFlat;

  using CordzInfo = cord_internal::CordzInfo;

  using CordzUpdateScope = cord_internal::CordzUpdateScope;

  using CordzUpdateTracker = cord_internal::CordzUpdateTracker;

  using InlineData = cord_internal::InlineData;

  using MethodIdentifier = CordzUpdateTracker::MethodIdentifier;

  // Creates a cord instance with `method` representing the originating

  // public API call causing the cord to be created.

  explicit Cord(absl::string_view src, MethodIdentifier method);

  friend class CordTestPeer;

  friend bool operator==(const Cord& lhs, const Cord& rhs);

  friend bool operator==(const Cord& lhs, absl::string_view rhs);

  friend const CordzInfo* GetCordzInfoForTesting(const Cord& cord);

  // Calls the provided function once for each cord chunk, in order.  Unlike

  // Chunks(), this API will not allocate memory.

  void ForEachChunk(absl::FunctionRef<void(absl::string_view)>) const;

  // Allocates new contiguous storage for the contents of the cord. This is

  // called by Flatten() when the cord was not already flat.

  absl::string_view FlattenSlowPath();

  // Actual cord contents are hidden inside the following simple

  // class so that we can isolate the bulk of cord.cc from changes

  // to the representation.

//

  // InlineRep holds either a tree pointer, or an array of kMaxInline bytes.

  class InlineRep {

   public:

    static constexpr unsigned char kMaxInline = cord_internal::kMaxInline;

    static_assert(kMaxInline >= sizeof(absl::cord_internal::CordRep*), "");

    constexpr InlineRep() : data_() {}

    explicit InlineRep(InlineData::DefaultInitType init) : data_(init) {}

    InlineRep(const InlineRep& src);

    InlineRep(InlineRep&& src);

    InlineRep& operator=(const InlineRep& src);

    InlineRep& operator=(InlineRep&& src) noexcept;

    explicit constexpr InlineRep(absl::string_view sv, CordRep* rep);

    void Swap(InlineRep* rhs);

    size_t size() const;

    const char* data() const;  // Returns nullptr if holding pointer

    void set_data(const char* data, size_t n);  // Discards pointer, if any

    char* set_data(size_t n);                   // Write data to the result

    // Returns nullptr if holding bytes

    absl::cord_internal::CordRep* tree() const;

    absl::cord_internal::CordRep* as_tree() const;

    const char* as_chars() const;

    // Returns non-null iff was holding a pointer

    absl::cord_internal::CordRep* clear();

    // Converts to pointer if necessary.

    void reduce_size(size_t n);    // REQUIRES: holding data

    void remove_prefix(size_t n);  // REQUIRES: holding data

    void AppendArray(absl::string_view src, MethodIdentifier method);

    absl::string_view FindFlatStartPiece() const;

    // Creates a CordRepFlat instance from the current inlined data with `extra'

    // bytes of desired additional capacity.

    CordRepFlat* MakeFlatWithExtraCapacity(size_t extra);

    // Sets the tree value for this instance. `rep` must not be null.

    // Requires the current instance to hold a tree, and a lock to be held on

    // any CordzInfo referenced by this instance. The latter is enforced through

    // the CordzUpdateScope argument. If the current instance is sampled, then

    // the CordzInfo instance is updated to reference the new `rep` value.

    void SetTree(CordRep* rep, const CordzUpdateScope& scope);

    // Identical to SetTree(), except that `rep` is allowed to be null, in

    // which case the current instance is reset to an empty value.

    void SetTreeOrEmpty(CordRep* rep, const CordzUpdateScope& scope);

    // Sets the tree value for this instance, and randomly samples this cord.

    // This function disregards existing contents in `data_`, and should be

    // called when a Cord is 'promoted' from an 'uninitialized' or 'inlined'

    // value to a non-inlined (tree / ring) value.

    void EmplaceTree(CordRep* rep, MethodIdentifier method);

    // Identical to EmplaceTree, except that it copies the parent stack from

    // the provided `parent` data if the parent is sampled.

    void EmplaceTree(CordRep* rep, const InlineData& parent,

                     MethodIdentifier method);

    // Commits the change of a newly created, or updated `rep` root value into

    // this cord. `old_rep` indicates the old (inlined or tree) value of the

    // cord, and determines if the commit invokes SetTree() or EmplaceTree().

    void CommitTree(const CordRep* old_rep, CordRep* rep,

                    const CordzUpdateScope& scope, MethodIdentifier method);

    void AppendTreeToInlined(CordRep* tree, MethodIdentifier method);

    void AppendTreeToTree(CordRep* tree, MethodIdentifier method);

    void AppendTree(CordRep* tree, MethodIdentifier method);

    void PrependTreeToInlined(CordRep* tree, MethodIdentifier method);

    void PrependTreeToTree(CordRep* tree, MethodIdentifier method);

    void PrependTree(CordRep* tree, MethodIdentifier method);

    bool IsSame(const InlineRep& other) const { return data_ == other.data_; }

    void CopyTo(std::string* dst) const {

      // memcpy is much faster when operating on a known size. On most supported

      // platforms, the small string optimization is large enough that resizing

      // to 15 bytes does not cause a memory allocation.

      absl::strings_internal::STLStringResizeUninitialized(dst, kMaxInline);

      data_.copy_max_inline_to(&(*dst)[0]);

      // erase is faster than resize because the logic for memory allocation is

      // not needed.

      dst->erase(inline_size());

    // Copies the inline contents into `dst`. Assumes the cord is not empty.

    void CopyToArray(char* dst) const;

    bool is_tree() const { return data_.is_tree(); }

    // Returns true if the Cord is being profiled by cordz.

    bool is_profiled() const { return data_.is_tree() && data_.is_profiled(); }

    // Returns the available inlined capacity, or 0 if is_tree() == true.

    size_t remaining_inline_capacity() const {

      return data_.is_tree() ? 0 : kMaxInline - data_.inline_size();

    // Returns the profiled CordzInfo, or nullptr if not sampled.

    absl::cord_internal::CordzInfo* cordz_info() const {

      return data_.cordz_info();

    // Sets the profiled CordzInfo. `cordz_info` must not be null.

    void set_cordz_info(cord_internal::CordzInfo* cordz_info) {

      assert(cordz_info != nullptr);

      data_.set_cordz_info(cordz_info);

    // Resets the current cordz_info to null / empty.

    void clear_cordz_info() { data_.clear_cordz_info(); }

   private:

    friend class Cord;

    void AssignSlow(const InlineRep& src);

    // Unrefs the tree and stops profiling.

    void UnrefTree();

    void ResetToEmpty() { data_ = {}; }

    void set_inline_size(size_t size) { data_.set_inline_size(size); }

    size_t inline_size() const { return data_.inline_size(); }

    // Empty cords that carry a checksum have a CordRepCrc node with a null

    // child node. The code can avoid lots of special cases where it would

    // otherwise transition from tree to inline storage if we just remove the

    // CordRepCrc node before mutations. Must never be called inside a

    // CordzUpdateScope since it untracks the cordz info.

    void MaybeRemoveEmptyCrcNode();

    cord_internal::InlineData data_;

};

  InlineRep contents_;

  // Helper for GetFlat() and TryFlat().

  static bool GetFlatAux(absl::cord_internal::CordRep* rep,

                         absl::string_view* fragment);

  // Helper for ForEachChunk().

  static void ForEachChunkAux(

      absl::cord_internal::CordRep* rep,

      absl::FunctionRef<void(absl::string_view)> callback);

  // The destructor for non-empty Cords.

  void DestroyCordSlow();

  // Out-of-line implementation of slower parts of logic.

  void CopyToArraySlowPath(char* dst) const;

  int CompareSlowPath(absl::string_view rhs, size_t compared_size,

                      size_t size_to_compare) const;

  int CompareSlowPath(const Cord& rhs, size_t compared_size,

                      size_t size_to_compare) const;

  bool EqualsImpl(absl::string_view rhs, size_t size_to_compare) const;

  bool EqualsImpl(const Cord& rhs, size_t size_to_compare) const;

  int CompareImpl(const Cord& rhs) const;

  template <typename ResultType, typename RHS>

  friend ResultType GenericCompare(const Cord& lhs, const RHS& rhs,

                                   size_t size_to_compare);

  static absl::string_view GetFirstChunk(const Cord& c);

  static absl::string_view GetFirstChunk(absl::string_view sv);

  // Returns a new reference to contents_.tree(), or steals an existing

  // reference if called on an rvalue.

  absl::cord_internal::CordRep* TakeRep() const&;

  absl::cord_internal::CordRep* TakeRep() &&;

  // Helper for Append().

  template <typename C>

  void AppendImpl(C&& src);

  // Appends / Prepends `src` to this instance, using precise sizing.

  // This method does explicitly not attempt to use any spare capacity

  // in any pending last added private owned flat.

  // Requires `src` to be <= kMaxFlatLength.

  void AppendPrecise(absl::string_view src, MethodIdentifier method);

  void PrependPrecise(absl::string_view src, MethodIdentifier method);

  CordBuffer GetAppendBufferSlowPath(size_t block_size, size_t capacity,

                                     size_t min_capacity);

  // Prepends the provided data to this instance. `method` contains the public

  // API method for this action which is tracked for Cordz sampling purposes.

  void PrependArray(absl::string_view src, MethodIdentifier method);

  // Assigns the value in 'src' to this instance, 'stealing' its contents.

  // Requires src.length() > kMaxBytesToCopy.

  Cord& AssignLargeString(std::string&& src);

  // Helper for AbslHashValue().

  template <typename H>

  H HashFragmented(H hash_state) const {

    typename H::AbslInternalPiecewiseCombiner combiner;

    ForEachChunk([&combiner, &hash_state](absl::string_view chunk) {

      hash_state = combiner.add_buffer(std::move(hash_state), chunk.data(),

                                       chunk.size());

});

    return H::combine(combiner.finalize(std::move(hash_state)), size());

  friend class CrcCord;

  void SetCrcCordState(crc_internal::CrcCordState state);

  const crc_internal::CrcCordState* MaybeGetCrcCordState() const;

  CharIterator FindImpl(CharIterator it, absl::string_view needle) const;

};

ABSL_NAMESPACE_END

}  // namespace absl

namespace absl {

ABSL_NAMESPACE_BEGIN

// allow a Cord to be logged

extern std::ostream& operator<<(std::ostream& out, const Cord& cord);

// ------------------------------------------------------------------

// Internal details follow.  Clients should ignore.

namespace cord_internal {

// Does non-template-specific `CordRepExternal` initialization.

// Requires `data` to be non-empty.

void InitializeCordRepExternal(absl::string_view data, CordRepExternal* rep);

// Creates a new `CordRep` that owns `data` and `releaser` and returns a pointer

// to it. Requires `data` to be non-empty.

template <typename Releaser>

// NOLINTNEXTLINE - suppress clang-tidy raw pointer return.

CordRep* NewExternalRep(absl::string_view data, Releaser&& releaser) {

  assert(!data.empty());

  using ReleaserType = absl::decay_t<Releaser>;

  CordRepExternal* rep = new CordRepExternalImpl<ReleaserType>(

      std::forward<Releaser>(releaser), 0);

  InitializeCordRepExternal(data, rep);

  return rep;

// Overload for function reference types that dispatches using a function

// pointer because there are no `alignof()` or `sizeof()` a function reference.

// NOLINTNEXTLINE - suppress clang-tidy raw pointer return.

inline CordRep* NewExternalRep(absl::string_view data,

                               void (&releaser)(absl::string_view)) {

  return NewExternalRep(data, &releaser);

}  // namespace cord_internal

template <typename Releaser>

Cord MakeCordFromExternal(absl::string_view data, Releaser&& releaser) {

  Cord cord;

  if (ABSL_PREDICT_TRUE(!data.empty())) {

    cord.contents_.EmplaceTree(::absl::cord_internal::NewExternalRep(

                                   data, std::forward<Releaser>(releaser)),

                               Cord::MethodIdentifier::kMakeCordFromExternal);

  } else {

    using ReleaserType = absl::decay_t<Releaser>;

    cord_internal::InvokeReleaser(

        cord_internal::Rank0{}, ReleaserType(std::forward<Releaser>(releaser)),

        data);

  return cord;

constexpr Cord::InlineRep::InlineRep(absl::string_view sv, CordRep* rep)

    : data_(sv, rep) {}

inline Cord::InlineRep::InlineRep(const Cord::InlineRep& src)

    : data_(InlineData::kDefaultInit) {

  if (CordRep* tree = src.tree()) {

    EmplaceTree(CordRep::Ref(tree), src.data_,

                CordzUpdateTracker::kConstructorCord);

  } else {

    data_ = src.data_;

inline Cord::InlineRep::InlineRep(Cord::InlineRep&& src) : data_(src.data_) {

  src.ResetToEmpty();

inline Cord::InlineRep& Cord::InlineRep::operator=(const Cord::InlineRep& src) {

  if (this == &src) {

    return *this;

  if (!is_tree() && !src.is_tree()) {

    data_ = src.data_;

    return *this;

  AssignSlow(src);

  return *this;

inline Cord::InlineRep& Cord::InlineRep::operator=(

    Cord::InlineRep&& src) noexcept {

  if (is_tree()) {

    UnrefTree();

  data_ = src.data_;

  src.ResetToEmpty();

  return *this;

inline void Cord::InlineRep::Swap(Cord::InlineRep* rhs) {

  if (rhs == this) {

    return;

  std::swap(data_, rhs->data_);

inline const char* Cord::InlineRep::data() const {

  return is_tree() ? nullptr : data_.as_chars();

inline const char* Cord::InlineRep::as_chars() const {

  assert(!data_.is_tree());

  return data_.as_chars();

inline absl::cord_internal::CordRep* Cord::InlineRep::as_tree() const {

  assert(data_.is_tree());

  return data_.as_tree();

inline absl::cord_internal::CordRep* Cord::InlineRep::tree() const {

  if (is_tree()) {

    return as_tree();

  } else {

    return nullptr;

inline size_t Cord::InlineRep::size() const {

  return is_tree() ? as_tree()->length : inline_size();

inline cord_internal::CordRepFlat* Cord::InlineRep::MakeFlatWithExtraCapacity(

    size_t extra) {

  static_assert(cord_internal::kMinFlatLength >= sizeof(data_), "");

  size_t len = data_.inline_size();

  auto* result = CordRepFlat::New(len + extra);

  result->length = len;

  data_.copy_max_inline_to(result->Data());

  return result;

inline void Cord::InlineRep::EmplaceTree(CordRep* rep,

                                         MethodIdentifier method) {

  assert(rep);

  data_.make_tree(rep);

  CordzInfo::MaybeTrackCord(data_, method);

inline void Cord::InlineRep::EmplaceTree(CordRep* rep, const InlineData& parent,

                                         MethodIdentifier method) {

  data_.make_tree(rep);

  CordzInfo::MaybeTrackCord(data_, parent, method);

inline void Cord::InlineRep::SetTree(CordRep* rep,

                                     const CordzUpdateScope& scope) {

  assert(rep);

  assert(data_.is_tree());

  data_.set_tree(rep);

  scope.SetCordRep(rep);

inline void Cord::InlineRep::SetTreeOrEmpty(CordRep* rep,

                                            const CordzUpdateScope& scope) {

  assert(data_.is_tree());

  if (rep) {

    data_.set_tree(rep);

  } else {

    data_ = {};

  scope.SetCordRep(rep);

inline void Cord::InlineRep::CommitTree(const CordRep* old_rep, CordRep* rep,

                                        const CordzUpdateScope& scope,

                                        MethodIdentifier method) {

  if (old_rep) {

    SetTree(rep, scope);

  } else {

    EmplaceTree(rep, method);

inline absl::cord_internal::CordRep* Cord::InlineRep::clear() {

  if (is_tree()) {

    CordzInfo::MaybeUntrackCord(cordz_info());

  absl::cord_internal::CordRep* result = tree();

  ResetToEmpty();

  return result;

inline void Cord::InlineRep::CopyToArray(char* dst) const {

  assert(!is_tree());

  size_t n = inline_size();

  assert(n != 0);

  cord_internal::SmallMemmove(dst, data_.as_chars(), n);

inline void Cord::InlineRep::MaybeRemoveEmptyCrcNode() {

  CordRep* rep = tree();

  if (rep == nullptr || ABSL_PREDICT_TRUE(rep->length > 0)) {

    return;

  assert(rep->IsCrc());

  assert(rep->crc()->child == nullptr);

  CordzInfo::MaybeUntrackCord(cordz_info());

  CordRep::Unref(rep);

  ResetToEmpty();

constexpr inline Cord::Cord() noexcept {}

inline Cord::Cord(absl::string_view src)

    : Cord(src, CordzUpdateTracker::kConstructorString) {}

template <typename T>

constexpr Cord::Cord(strings_internal::StringConstant<T>)

    : contents_(strings_internal::StringConstant<T>::value,

                strings_internal::StringConstant<T>::value.size() <=

                        cord_internal::kMaxInline

                    ? nullptr

                    : &cord_internal::ConstInitExternalStorage<

                          strings_internal::StringConstant<T>>::value) {}

inline Cord& Cord::operator=(const Cord& x) {

  contents_ = x.contents_;

  return *this;

template <typename T, Cord::EnableIfString<T>>

Cord& Cord::operator=(T&& src) {

  if (src.size() <= cord_internal::kMaxBytesToCopy) {

    return operator=(absl::string_view(src));

  } else {

    return AssignLargeString(std::forward<T>(src));

inline Cord::Cord(const Cord& src) : contents_(src.contents_) {}

inline Cord::Cord(Cord&& src) noexcept : contents_(std::move(src.contents_)) {}

inline void Cord::swap(Cord& other) noexcept {

  contents_.Swap(&other.contents_);

inline Cord& Cord::operator=(Cord&& x) noexcept {

  contents_ = std::move(x.contents_);

  return *this;

extern template Cord::Cord(std::string&& src);

inline size_t Cord::size() const {

  // Length is 1st field in str.rep_

  return contents_.size();

inline bool Cord::empty() const { return size() == 0; }

inline size_t Cord::EstimatedMemoryUsage(

    CordMemoryAccounting accounting_method) const {

  size_t result = sizeof(Cord);

  if (const absl::cord_internal::CordRep* rep = contents_.tree()) {

    switch (accounting_method) {

      case CordMemoryAccounting::kFairShare:

        result += cord_internal::GetEstimatedFairShareMemoryUsage(rep);

        break;

      case CordMemoryAccounting::kTotalMorePrecise:

        result += cord_internal::GetMorePreciseMemoryUsage(rep);

        break;

      case CordMemoryAccounting::kTotal:

        result += cord_internal::GetEstimatedMemoryUsage(rep);

        break;

  return result;

inline absl::optional<absl::string_view> Cord::TryFlat() const {

  absl::cord_internal::CordRep* rep = contents_.tree();

  if (rep == nullptr) {

    return absl::string_view(contents_.data(), contents_.size());

  absl::string_view fragment;

  if (GetFlatAux(rep, &fragment)) {

    return fragment;

  return absl::nullopt;

inline absl::string_view Cord::Flatten() {

  absl::cord_internal::CordRep* rep = contents_.tree();

  if (rep == nullptr) {

    return absl::string_view(contents_.data(), contents_.size());

  } else {

    absl::string_view already_flat_contents;

    if (GetFlatAux(rep, &already_flat_contents)) {

      return already_flat_contents;

  return FlattenSlowPath();

inline void Cord::Append(absl::string_view src) {

  contents_.AppendArray(src, CordzUpdateTracker::kAppendString);

inline void Cord::Prepend(absl::string_view src) {

  PrependArray(src, CordzUpdateTracker::kPrependString);

inline void Cord::Append(CordBuffer buffer) {

  if (ABSL_PREDICT_FALSE(buffer.length() == 0)) return;

  absl::string_view short_value;

  if (CordRep* rep = buffer.ConsumeValue(short_value)) {

    contents_.AppendTree(rep, CordzUpdateTracker::kAppendCordBuffer);

  } else {

    AppendPrecise(short_value, CordzUpdateTracker::kAppendCordBuffer);

inline void Cord::Prepend(CordBuffer buffer) {

  if (ABSL_PREDICT_FALSE(buffer.length() == 0)) return;

  absl::string_view short_value;

  if (CordRep* rep = buffer.ConsumeValue(short_value)) {

    contents_.PrependTree(rep, CordzUpdateTracker::kPrependCordBuffer);

  } else {

    PrependPrecise(short_value, CordzUpdateTracker::kPrependCordBuffer);

inline CordBuffer Cord::GetAppendBuffer(size_t capacity, size_t min_capacity) {

  if (empty()) return CordBuffer::CreateWithDefaultLimit(capacity);

  return GetAppendBufferSlowPath(0, capacity, min_capacity);

inline CordBuffer Cord::GetCustomAppendBuffer(size_t block_size,

                                              size_t capacity,

                                              size_t min_capacity) {

  if (empty()) {

    return block_size ? CordBuffer::CreateWithCustomLimit(block_size, capacity)

                      : CordBuffer::CreateWithDefaultLimit(capacity);

  return GetAppendBufferSlowPath(block_size, capacity, min_capacity);

extern template void Cord::Append(std::string&& src);

extern template void Cord::Prepend(std::string&& src);

inline int Cord::Compare(const Cord& rhs) const {

  if (!contents_.is_tree() && !rhs.contents_.is_tree()) {

    return contents_.data_.Compare(rhs.contents_.data_);

  return CompareImpl(rhs);

// Does 'this' cord start/end with rhs

inline bool Cord::StartsWith(const Cord& rhs) const {

  if (contents_.IsSame(rhs.contents_)) return true;

  size_t rhs_size = rhs.size();

  if (size() < rhs_size) return false;

  return EqualsImpl(rhs, rhs_size);

inline bool Cord::StartsWith(absl::string_view rhs) const {

  size_t rhs_size = rhs.size();

  if (size() < rhs_size) return false;

  return EqualsImpl(rhs, rhs_size);

inline void Cord::ChunkIterator::InitTree(cord_internal::CordRep* tree) {

  tree = cord_internal::SkipCrcNode(tree);

  if (tree->tag == cord_internal::BTREE) {

    current_chunk_ = btree_reader_.Init(tree->btree());

  } else {

    current_leaf_ = tree;

    current_chunk_ = cord_internal::EdgeData(tree);

inline Cord::ChunkIterator::ChunkIterator(cord_internal::CordRep* tree) {

  bytes_remaining_ = tree->length;

  InitTree(tree);

inline Cord::ChunkIterator::ChunkIterator(const Cord* cord) {

  if (CordRep* tree = cord->contents_.tree()) {

    bytes_remaining_ = tree->length;

    if (ABSL_PREDICT_TRUE(bytes_remaining_ != 0)) {

      InitTree(tree);

    } else {

      current_chunk_ = {};

  } else {

    bytes_remaining_ = cord->contents_.inline_size();

    current_chunk_ = {cord->contents_.data(), bytes_remaining_};

inline Cord::ChunkIterator& Cord::ChunkIterator::AdvanceBtree() {

  current_chunk_ = btree_reader_.Next();

  return *this;

inline void Cord::ChunkIterator::AdvanceBytesBtree(size_t n) {

  assert(n >= current_chunk_.size());

  bytes_remaining_ -= n;

  if (bytes_remaining_) {

    if (n == current_chunk_.size()) {

      current_chunk_ = btree_reader_.Next();

    } else {

      size_t offset = btree_reader_.length() - bytes_remaining_;

      current_chunk_ = btree_reader_.Seek(offset);

  } else {

    current_chunk_ = {};

inline Cord::ChunkIterator& Cord::ChunkIterator::operator++() {

  ABSL_HARDENING_ASSERT(bytes_remaining_ > 0 &&

                        "Attempted to iterate past `end()`");

  assert(bytes_remaining_ >= current_chunk_.size());

  bytes_remaining_ -= current_chunk_.size();

  if (bytes_remaining_ > 0) {

    if (btree_reader_) {

      return AdvanceBtree();

    } else {

      assert(!current_chunk_.empty());  // Called on invalid iterator.

    current_chunk_ = {};

  return *this;

inline Cord::ChunkIterator Cord::ChunkIterator::operator++(int) {

  ChunkIterator tmp(*this);

  operator++();

  return tmp;

inline bool Cord::ChunkIterator::operator==(const ChunkIterator& other) const {

  return bytes_remaining_ == other.bytes_remaining_;

inline bool Cord::ChunkIterator::operator!=(const ChunkIterator& other) const {

  return !(*this == other);

inline Cord::ChunkIterator::reference Cord::ChunkIterator::operator*() const {

  ABSL_HARDENING_ASSERT(bytes_remaining_ != 0);

  return current_chunk_;

inline Cord::ChunkIterator::pointer Cord::ChunkIterator::operator->() const {

  ABSL_HARDENING_ASSERT(bytes_remaining_ != 0);

  return &current_chunk_;

inline void Cord::ChunkIterator::RemoveChunkPrefix(size_t n) {

  assert(n < current_chunk_.size());

  current_chunk_.remove_prefix(n);

  bytes_remaining_ -= n;

inline void Cord::ChunkIterator::AdvanceBytes(size_t n) {

  assert(bytes_remaining_ >= n);

  if (ABSL_PREDICT_TRUE(n < current_chunk_.size())) {

    RemoveChunkPrefix(n);

  } else if (n != 0) {

    if (btree_reader_) {

      AdvanceBytesBtree(n);

    } else {

      bytes_remaining_ = 0;

inline Cord::ChunkIterator Cord::chunk_begin() const {

  return ChunkIterator(this);

inline Cord::ChunkIterator Cord::chunk_end() const { return ChunkIterator(); }

inline Cord::ChunkIterator Cord::ChunkRange::begin() const {

  return cord_->chunk_begin();

inline Cord::ChunkIterator Cord::ChunkRange::end() const {

  return cord_->chunk_end();

inline Cord::ChunkRange Cord::Chunks() const { return ChunkRange(this); }

inline Cord::CharIterator& Cord::CharIterator::operator++() {

  if (ABSL_PREDICT_TRUE(chunk_iterator_->size() > 1)) {

    chunk_iterator_.RemoveChunkPrefix(1);

  } else {

    ++chunk_iterator_;

  return *this;

inline Cord::CharIterator Cord::CharIterator::operator++(int) {

  CharIterator tmp(*this);

  operator++();

  return tmp;

inline bool Cord::CharIterator::operator==(const CharIterator& other) const {

  return chunk_iterator_ == other.chunk_iterator_;

inline bool Cord::CharIterator::operator!=(const CharIterator& other) const {

  return !(*this == other);

inline Cord::CharIterator::reference Cord::CharIterator::operator*() const {

  return *chunk_iterator_->data();

inline Cord::CharIterator::pointer Cord::CharIterator::operator->() const {

  return chunk_iterator_->data();

inline Cord Cord::AdvanceAndRead(CharIterator* it, size_t n_bytes) {

  assert(it != nullptr);

  return it->chunk_iterator_.AdvanceAndReadBytes(n_bytes);

inline void Cord::Advance(CharIterator* it, size_t n_bytes) {

  assert(it != nullptr);

  it->chunk_iterator_.AdvanceBytes(n_bytes);

inline absl::string_view Cord::ChunkRemaining(const CharIterator& it) {

  return *it.chunk_iterator_;

inline Cord::CharIterator Cord::char_begin() const {

  return CharIterator(this);

inline Cord::CharIterator Cord::char_end() const { return CharIterator(); }

inline Cord::CharIterator Cord::CharRange::begin() const {

  return cord_->char_begin();

inline Cord::CharIterator Cord::CharRange::end() const {

  return cord_->char_end();

inline Cord::CharRange Cord::Chars() const { return CharRange(this); }

inline void Cord::ForEachChunk(

    absl::FunctionRef<void(absl::string_view)> callback) const {

  absl::cord_internal::CordRep* rep = contents_.tree();

  if (rep == nullptr) {

    callback(absl::string_view(contents_.data(), contents_.size()));

  } else {

    ForEachChunkAux(rep, callback);

// Nonmember Cord-to-Cord relational operators.

inline bool operator==(const Cord& lhs, const Cord& rhs) {

  if (lhs.contents_.IsSame(rhs.contents_)) return true;

  size_t rhs_size = rhs.size();

  if (lhs.size() != rhs_size) return false;

  return lhs.EqualsImpl(rhs, rhs_size);

inline bool operator!=(const Cord& x, const Cord& y) { return !(x == y); }

inline bool operator<(const Cord& x, const Cord& y) { return x.Compare(y) < 0; }

inline bool operator>(const Cord& x, const Cord& y) { return x.Compare(y) > 0; }

inline bool operator<=(const Cord& x, const Cord& y) {

  return x.Compare(y) <= 0;

inline bool operator>=(const Cord& x, const Cord& y) {

  return x.Compare(y) >= 0;

// Nonmember Cord-to-absl::string_view relational operators.

//

// Due to implicit conversions, these also enable comparisons of Cord with

// std::string and const char*.

inline bool operator==(const Cord& lhs, absl::string_view rhs) {

  size_t lhs_size = lhs.size();

  size_t rhs_size = rhs.size();

  if (lhs_size != rhs_size) return false;

  return lhs.EqualsImpl(rhs, rhs_size);

inline bool operator==(absl::string_view x, const Cord& y) { return y == x; }

inline bool operator!=(const Cord& x, absl::string_view y) { return !(x == y); }

inline bool operator!=(absl::string_view x, const Cord& y) { return !(x == y); }

inline bool operator<(const Cord& x, absl::string_view y) {

  return x.Compare(y) < 0;

inline bool operator<(absl::string_view x, const Cord& y) {

  return y.Compare(x) > 0;

inline bool operator>(const Cord& x, absl::string_view y) { return y < x; }

inline bool operator>(absl::string_view x, const Cord& y) { return y < x; }

inline bool operator<=(const Cord& x, absl::string_view y) { return !(y < x); }

inline bool operator<=(absl::string_view x, const Cord& y) { return !(y < x); }

inline bool operator>=(const Cord& x, absl::string_view y) { return !(x < y); }

inline bool operator>=(absl::string_view x, const Cord& y) { return !(x < y); }

// Some internals exposed to test code.

namespace strings_internal {

class CordTestAccess {

 public:

  static size_t FlatOverhead();

  static size_t MaxFlatLength();

  static size_t SizeofCordRepExternal();

  static size_t SizeofCordRepSubstring();

  static size_t FlatTagToLength(uint8_t tag);

  static uint8_t LengthToTag(size_t s);

};

}  // namespace strings_internal

ABSL_NAMESPACE_END

}  // namespace absl

#endif  // ABSL_STRINGS_CORD_H_

Source code

Revision control

Copy as Markdown

Other Tools