Source code
Revision control
Copy as Markdown
Other Tools
'use strict';
const kSensorData = {
sensorName: 'AmbientLightSensor',
permissionName: 'ambient-light-sensor',
testDriverName: 'ambient-light',
featurePolicyNames: ['ambient-light-sensor']
};
const kReadings = {
readings: [
// Readings are selected so that illuminance significance check causes
// the following to happen:
// 1. First two values test situation when two values would be rounded
// to same value. As the second value would be rounded to same value
// as first it won't trigger reading event.
// 2. New value is set to 24. And test checks it is correctly rounded to
// 0.
// 3. New reading is attempted to set to 35.
// 4. Value is read from sensor and compared new reading. But as new
// reading was not significantly different compared to initial, for
// privacy reasons, service returns the initial value.
// 5. New value is set to 49. And test checks it is correctly rounded to
// 50. New value is allowed as it is significantly different compared
// to old value (24).
// 6. New reading is attempted to set to 35.
// 7. Value is read from sensor and compared new reading. But as new
// reading was not significantly different compared to initial, for
// privacy reasons, service returns the initial value.
// 8. New value is set to 23. And test checks it is correctly rounded to
// 0. New value is allowed as it is significantly different compared
// to old value (49).
//
// Note: Readings and expectedReadings wraps around correctly as next
// value would be 150 (output from 127).
{ illuminance: 127 }, { illuminance: 165 }, { illuminance: 24 }, {
illuminance:
35
}, { illuminance: 49 }, { illuminance: 35 }, { illuminance: 23 }
],
expectedReadings: [
{ illuminance: 150 }, // output from 127
{ illuminance: 0 }, // output from 24
{ illuminance: 50 }, // output from 49
{ illuminance: 0 } // output from 23
]
};